Synthesis of an s-butyldibenz[a,h]acridine. Alkyl migration in the bernthsen reaction

The Bernthsen reaction between N-1-naphthyl-2-naphthylamine and 2-methylbutanoic acid and its anhydride at 200–230° for seven hours gives a low yield of 12- or 13-s-butyldibenz[a,h]acridine, instead of the expected 14-isomer. The parent molecule dibenz[a,h]acridine results from the same reaction conducted at 270° for thirteen hours. It is suggested that alkyl migration may have occurred in some other cases where the Bernthsen reaction was reported to yield 14-alkyldibenz[a,h]acridines.     

High-throughput capillary electrophoretic method for determination of total aminothiols in plasma and urine.

Increased interest in the analysis of aminothiols in body fluids during the last years results in a request for high-throughput analytical methods for their determination. We report here a novel, high-throughput method for the determination of total concentrations of biogenous aminothiols - homocysteine, cysteine, glutathione, cysteinylglycine, gamma-glutamylcysteine, and of penicilamine, mercaptopropionylglycine, and cysteamine, three compounds used to treat disorders of aminothiol metabolism in plasma and urine. Samples were reduced with tris(carboxyethyl)phosphine and labeled with 5-(bromomethyl)fluorescein. Capillary electrophoretic separations were performed in 60 mmol/L borate - 15 mmol/L sodium dodecyl sulfate - 2-amino-2-methyl-1-propanol, pH 10.0, with laser-induced fluorescence detection. Analysis time was less than 2 min. The assay is linear (r > 0.999) up to 500 micromol/L. Reproducibilities of migration times (coefficient of variation, CV) were < 0.5%. Interassay repeatabilities (CV, n = 10) were 5.08% and 6.09% for 5 micromol/L addition of homocysteine and 0.60% and 3.78% for 100 micromol/L addition of cysteine in plasma and urine, respectively. Recovery values were within 94-106% and sensitivity was better than 0.19 micromol/L for all analyzed compounds. Results agreed well with a standard high-performance liquid chromatography (HPLC) method. The diagnostic usefulness of the method has been proven on 79 samples of cystinuric patients and 12 samples of homocystinuric patients. We report here a novel method for the determination of aminothiols in body fluids by capillary electrophoresis (CE). Determination is fast and sensitive enough for diagnostic purposes.     

A series of novel lanthanide polyoxometalates: condensation of building blocks dependent on the nature of rare earth cations

A series of novel lanthanide polyoxomolybdates was synthesized by reaction of lanthanide cations with the Anderson type anion (TeMo(6)O(24))(6-). The polyoxometalates K(6n)(TeMo(6)O(24))(n)[(Ln(H(2)O)(7))(2)(TeMo(6)O(24))](n)[middle dot]16nH(2)O (Ln = Eu, Gd) and K(3n)[Ln(H(2)O)(5)(TeMo(6)O(24))](n)[middle dot]6nH(2)O (Ln = Tb, Dy, Ho, Er) were characterized by X-ray structure analysis, elemental analysis and IR spectroscopy. We found that the solid-state structures of Ln/(TeMo(6)O(24))(6-) compounds are strongly dependent on the lanthanide cations, and therefore represent a rare example for different arrangements of building units depending on the nature of the rare earth cations. While the Eu(3+) and Gd(3+) cations achieve ninefold coordination by seven water molecules and two terminal oxygen atoms of the (TeMo(6)O(24))(6-) anions, the Tb(3+), Dy(3+), Ho(3+) and Er(3+) cations are coordinated by five water molecules, two terminal oxygen atoms and one molybdenum-bridging oxygen atom belonging to the (TeMo(6)O(24))(6-) anion. The europium and gadolinium substituted compounds contain infinite one-dimensional [(Ln(H(2)O)(7))(2)(TeMo(6)O(24))](n) chains; the terbium, dysprosium, holmium and erbium compounds contain infinite one-dimensional [Ln(H(2)O)(5)(TeMo(6)O(24))](n)(3n-) chains.     

Conformation of receptor-associated PGI2: An investigation by molecular modeling

Summary To elucidate the conformation of receptor-associated prostacyclin (PGI₂), we first performed structure-activity correlation analysis of over 200 PGI₂ analogues and derived from this analysis several crucial features pertaining to structural requirements for PGI₂ activity [Ah-lim Tsai and Kenneth K. Wu, Eicosanoids, 2 (1989) 131–143]. These structural features proved to be useful guidelines for selecting model molecules for further investigations by molecular mechanics. By properly selecting four analogues with either rigid or uniquely oriented -side chain structure for geometric fitting, we succeeded in maximally minimizing the degree of freedom of the carboxylate terminus of PGI₂. We were able to define the spatial relationship among the four critical functional groups, i.e., C1-COOH, C6a-O, C11-OH and C15-OH. More information is needed, however, to define the geometry of the -side chain, particularly for the moiety beyond C15. Nevertheless, results from structure-activity correlation analysis and molecular modeling provide useful information regarding the conformation of receptor-associated PGI₂, which assumes an elongated conformation instead of the traditional hairpin structure.     

Heteroaromatic boron compounds. XV. Deuteriodeprotonation in some borazarothienopyridines and thienopyridines

Deuteriodeprotonation of some substituted 4,5-borazarothieno[2,3-c]pyridines (I) and 7,6-borazarothieno[3,2-c]pyridines (II) has been studied by the nmr technique. Exchange occurred predominantly in the 3-position, and the effect of methyl substitution on rate is discussed. The rates of exchange in some derivatives of I and II were compared with those of the isoelectronic thieno[2,3-c]pyridines (III) and thieno[3,2-c]pyridines (IV). Similar rates were obtained, confirming the aromatic nature of I and II. The deuteriodeprotonation of 4-methyl-4,5-borazaro-thieno[2,3-c]pyridine (Ie), 7-methyl-7,6-borazarothieno[3,2-c]pyridine (IIe), 4-methylthieno-[2,3-c]pyridine (IIIe), and 7-methylthieno[3,2-c]pyridine (IVe) were measured at different concentrations of deuteriosulfuric acid and different temperatures, showing that the protonated heterocycles are substrates in the deuteriodeprotonation reaction. Standard rates at p0 H and 100° were calculated for these systems.     

UHF-CI studies of energy barriers for the abstraction and exchange reactions in the system H + CH4

UHF and CI calculations, using the direct CI method, and double-zeta plus polarization functions basis sets, have been performed on the more important parts of the energy hypersurface for CH₅. The abstraction H + CH₄ → H₂ + CH₃ and the inversion substitution reaction H′ + CH₄ → CH₃H′ + H have been studied in detail. The predicted barriers for these two reactions are 13.5 and 36.6 kcal/mol, respectively. The abstraction reaction is, in agreement with experiment, found to be almost thermo-neutral with a heat of reaction of 1.5 kcal/mol.     

Computer-assisted optimization of selectivity by tuning temperature and carrier gas pressure drop in two GC capillary columns coupled in series

The paper shows a computer-assisted procedure for the optimization of selectivity of two columns coupled in series by tuning the working temperature (using the isothermal mode) and columns coupling-point pressure at constant inlet and outlet carrier gas pressures. The optimization procedure validation was tested by the separation of 32 hydrocarbons in a column series with the aim to resolve the maximum number of components in the shortest possible analysis time.Dedicated to Professor J. F. K. Huber on the occasion of his 65th birthday     

Interpretation of CALUX results in view of the EU maximal TEQ level in milk

Analyses of dioxins in food have become increasingly important since the European Commission has enforced maximal toxic equivalent concentration (TEQ) levels in various food and feed products. Screening methodologies are usually used to exempt those samples that are below the maximum permitted limit and that can, therefore, be released to the market. In addition, one needs to select those samples that require confirmation of their dioxin TEQ level. When bioassays are used as screening tools, the interpretation of the obtained results should consider the higher variability and uncertainty associated with them. This paper explores the use of CALUX data as quantitative screening results. The validation of the method for the polychlorinated dibenzo-p-dioxins (PCDD)/F TEQ determination in milk samples is described with emphasis on the decision limit (CC) and the precision of the method. The decision limit amounts to 4.53 pg TEQ/g fat. Repeatability and within-lab reproducibility coefficients of variation are below 30%. The newly introduced parameter CC^* of 1.47 pg TEQ/g fat delimits with CC a range of suspicious results. These data are not significantly different from the maximum limit of 3 pg TEQ/g fat and should be confirmed by a confirmatory analytical method such as HRGC–HRMS.     

Practical aspects of splitless injection of semivolatile compounds in fast gas chromatography

Possibilities and practical aspects of implementation of splitless injection of larger volumes for fast GC purposes utilizing narrow-bore column, hydrogen as carrier gas, fast temperature programming under programmed flow conditions and commercial instrumentation were searched. As a model sample semivolatile compounds of a broad range of volatility and polarity (7 n-alkanes and 19 pesticides) were chosen. Peak shapes, peak broadening and peak areas and its repeatability were evaluated under various experimental set-ups (liner/injection technique combinations). Various factors, such as liner design, injection technique, retention gap length, compound volatility and polarity, the solvent used, initial oven temperature influenced compound focusation and/or maximal injection volume. Combination of analytical column (CP-Sil 13 CB 25 m long, 0.15 mm i.d., film thickness 0.4 microm) with normal-bore retention gap (1 m long, 0.32 mm i.d.) allowed maximal injection volume 8 microl for 4 mm i.d. liner used without any peak distortion when solvent recondensation in the retention gap was employed.     

Inclusion of dynamic σ-π polarization in π-electronab initio calculations

Summary A method is presented, whereby dynamic - polarization, i.e. the correlation effect expressed by simultaneous (-*, -*) excitations, can be approximately included in a multi-reference configuration interaction (MRCI) or multi-configurational self-consistent field (MC-SCF) calculation, without need to explicitly correlate the sigma orbitals. The method, which we call the capacitance matrix method, is based on the use of conventional one-electron integrals, from which a polarization potential (SPP) contribution is computed and added to the one- and two-electron Hamiltonian. In the present form, the method requires one parameter for each type of atom, and one for each type of bond. These parameters were adjusted to reproduce the dynamic - polarization energy, computed by restricted multi-reference CI calculations, of a number of states of different hydrocarbons, and the agreement was within a few percent. Using the same parameters in CAS (Complete Active Space) SCF calculations of various states of benzene gives excitation energies, when SPP is included, which is comparable to those obtained by much more elaborate MRCI calculations.