Electromagnetic interference shielding and radiation absorption in thin polypyrrole films

Results of permittivity measurements, electromagnetic interference shielding effectiveness, and heat generation due to microwave absorption in conducting polymer coated textiles are reported and discussed. The intrinsically conducting polymer, polypyrrole, doped with anthraquinone-2-sulfonic acid (AQSA) or para-toluene-2-sulfonic acid (pTSA) was applied on textile substrates and the resulting materials were investigated in the frequency range 1-18 GHz. The 0.54 mm thick conducting textile/polypyrrole composites absorbed up to 49.5% of the incident 30-35 W microwave radiation. A thermography station was used to monitor the temperature of these composites during the irradiation process, where absorption was confirmed via visible heat losses. Samples with lower conductivity showed larger temperature increases caused by microwave absorption compared to samples with higher conductivity. A sample with an average sheet resistivity of 150 Ω/sq. showed a maximum temperature increase of 5.27 °C, whilst a sample with a lower resistivity (105 Ω/sq.) rose by 3.85 °C.     

Synthesis, characterization, and reactivity of half-sandwich Ru(II) complexes containing phosphine, arsine, stibine, and bismutine ligands

The synthesis and some reactions of the Ru(II) and Ru(IV) half-sandwich complexes [RuCp(EPh₃)(CH₃CN)₂]⁺ (E=P, As, Sb, Bi) and [RuCp(EPh₃)(η³-C₃H₅)Br]⁺ have been investigated. The chemistry of this class of compounds is characterized by a competitive coordination of EPh₃ either via a RuE or a η⁶-arene bond, where the latter is favored when the former is weaker, that is in going down the series. Thus in the case of Bi, the starting material [RuCp(CH₃CN)₃]⁺ does not react with BiPh₃ to give [RuCp(BiPh₃)(CH₃CN)₂]⁺ but instead gives only the η⁶-arene species [RuCp(η⁶-PhBiPh₂)]⁺ and [(RuCp)₂(μ-η⁶,η⁶-Ph₂BiPh)]²⁺. Similarly, the EPh₃ ligand can be replaced by an aromatic solvent or an arene substrate. Thus, the catalytic performance of [RuCp(EPh₃)(CH₃CN)₂]⁺ for the isomerization of allyl-phenyl ethers to the corresponding 1-propenyl ethers is best with E=P, while the conversion drops significantly using the As and Sb derivatives. By the same token, only [RuCp(PPh₃)(CH₃CN)₂]⁺ is stable in a non-aromatic solvent, whereas both [RuCp(AsPh₃)(CH₃CN)₂]⁺ and [RuCp(SbPh₃)(CH₃CN)₂]⁺ rearrange upon warming to [RuCp(η⁶-PhEPh₂)]⁺ and related compounds. In addition, the potential of [RuCp(EPh₃)(CH₃CN)₂]⁺ as precatalysts for the transfer hydrogenation of acetophenone and cyclohexanone has been investigated. Again aromatic substrates are clearly less suited than non-aromatic ones due to facile η⁶-arene coordination leading to catalyst's deactivation.     

Pyrylium-containing polymers as sensory materials for the colorimetric sensing of cyanide in water

A sensory polymeric material for the colorimetric sensing of cyanide in water has been developed based on the reactivity of this anion with the pyrylium cation.     

Synthesis and characterisation of a series of alkylmagnesium amide and related oxygen-contaminated "alkoxy" compounds

Synthesised either by an unusual tert-butyl metathesis between tert-butyllithium and a n,s-butylmagnesium amide or by reaction of an alkyl Grignard reagent and a sodium amide, five tert-butylmagnesium amides, Bu(t)MgDBA (5)(DBA=dibenzylamide), Bu(t)MgDA (6)(DA=diisopropylamide), Bu(t)MgHMDS (7)(HMDS=1,1,1,3,3,3-hexamethyldisilazide), Bu(t)MgTMP (8)(TMP=2,2,6,6-tetramethylpiperidide) and Bu(t)MgNCy2 (9)(cy=cyclohexyl) have been isolated as crystalline solids. All five amides have been characterised by X-ray crystallography and solution NMR spectroscopic studies. The former studies reveal a common dimeric molecular structure with amido bridges in a planar (MgN)2 ring and terminal Bu(t) ligands on the Mg atoms. Also described is the dodecameric primary amide [Bu(n)MgN(H)Dipp]12 (10a) and its monomeric solvate Bu(n)MgN(H)Dipp.TMEDA (10b)(Dipp=2,6-diisopropylphenyl; TMEDA=N,N,N',N'-tetramethylethylenediamine). The crystal structures of the oxo-insertion products Bu(t)MgOBu(t).THF (11), Bu(t)Mg(mu-OBu(t))(mu-TMP)MgTMP (12) and Mg(OBu(n))HMDS.solv [solv=THF (13a) or Et2O (13b)], made fortuitously during the course of this work, are also presented.     

Effects of partial/asymmetrical filling of micelles and chiral selectors on capillary electrophoresis enantiomeric separation: generation of a gradient

The effect of several experimental parameters on enantiomeric separations in micellar capillary electrophoresis (MCE) was studied. A model separation system was tested. It was composed of an acidic phosphate buffer with sodium dodecyl sulfate (SDS) and hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as the chiral selector. A substituted angelicin was used as a chiral analyte. Changes in the concentration of SDS micelles/SDS monomers in the presence of HP-beta-CD and their impact on the enantioselective separation were investigated. Variation of the composition of electrolytes in the individual compartments of the separation system (inlet vial, capillary, and outlet vial) affected both the migration times and the resolution of the enantiomers. Current vs. time dependencies also were monitored during the separations. A mathematical model of electromigration in micellar systems with chiral selector present was proposed and a computer simulation was used to explain the observed phenomena and to confirm the generation of a CD/SDS-micelle concentration gradient under certain experimental conditions. This is the reported first attempt of a computer simulation of the complex, dynamic chiral environment of the CD-SDS-MCE system.     

1,8-Naphthyridines. Part III. Synthesis of some 6-substituted-1,8-naphthyridin-2(1H)ones

The syntheses of some 1,8-naphthyridines substituted in the 6-position with heterocyclic groups are described. A synthetic route to 6-amino-5,7-dimethyl-1,8-naphthyridin-2(1H)one is also presented.     

ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Saturated heterocycles, 162 [1]. synthesis and steric structures of 3,4-disubstituted 1,6,7,11b-tetrahydropyrimido[6,1-a]isoquinolin-2-ones

The reaction of 1-(hydrazidomethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 3 with aromatic aldehydes yield hydrazones 4a,b or pyrimido[6,1-a]isoquinolines 5a-c depending upon the proportions of the reagents. With ketones, 3 gives only hydrazones 4a-d and 7 , which can be transformed to pyrimidoisoquinolines 10a-e and 11 with aldehydes. The ring closures are stereospecific; the relative configurations were determined by DNOE measurements.     

Estimation of the absolute internal-rotation entropy of molecules with two torsional degrees of freedom from stochastic simulations

A method of statistical estimation is applied to the problem of evaluating the absolute entropy of internal rotation in a molecule with two torsional degrees of freedom. The configurational part of the entropy is obtained as that of the joint probability density of an arbitrary form represented by a two-dimensional Fourier series, the coefficients of which are statistically estimated using a sample of the torsional angles of the molecule obtained by a stochastic simulation. The internal rotors in the molecule are assumed to be attached to a common frame, and their reduced moments of inertia are initially calculated as functions of the two torsional angles, but averaged over all the remaining internal degrees of freedom using the stochastic-simulation sample of the atomic configurations of the molecule. The torsional-angle dependence of the reduced moments of inertia can be also averaged out, and the absolute internal-rotation entropy of the molecule is obtained in a good approximation as the sum of the configurational entropy and a kinetic contribution fully determined by the averaged reduced moments of inertia. The method is illustrated using Monte Carlo simulations of isomers of stilbene and halogenated derivatives of propane. The two torsional angles in cis-stilbene are found to be much more strongly correlated than those in trans-stilbene, while the degree of the angular correlation in propane increases strongly on substitution of hydrogen atoms with chlorine.