Solid-phase microextraction for the determination of benzoylureas in orange juice using liquid chromatography combined with post-column photochemically induced fluorimetry derivatization and fluorescence detection

A solid-phase microextraction (SPME) method has been developed for the determination of six benzoylureas (diflubenzuron, triflumuron, hexaflumuron, teflubenzuron, lufenuron, and flufenoxuron) in natural orange juice based on the direct immersion mode of a 60 microm polydimethylsiloxane/divinylbenzene fiber. An orange juice was obtained from blended, homogenized, and diluted ecological natural orange juice samples. An aliquot of 3 mL of a spiked sample was extracted under optimum SPME conditions. The determination of benzoylureas was carried out using HPLC combined with post-column photochemically induced fluorimetry derivatization and fluorescence detection. The limits of quantification obtained in matrix were within the range of 0.02 to 0.04 mg/kg and these limits are lower than the maximum residue levels established in Spanish regulations for all pesticides in this study. Recoveries in juice samples ranged between 85 and 110% and relative standard deviations between 1.8 and 7.4%.     

Determination of phenolic compounds derived from hydrolysable tannins in biological matrices by RP-HPLC

An RP-HPLC method for the determination of four phenolic compounds: gallic acid (GA), pyrogallol (PY), resorcinol (RE) and ellagic acid (EA), derived from hydrolysable tannins is reported. Separation was achieved on a SunFire C18 (250 x 4.6 mm id, 5 microm) column at 40 degrees C with gradient elution. UV detection at 280 nm was applied. The developed method was validated in terms of linearity, accuracy and precision. Satisfactory repeatability and between day precision were noticed with RSD values lower than 3%. Recoveries from different biological samples ranged from 91.50 to 105.25%. The LODs were estimated as 1.70 mg/L for PY, 1.68 mg/L for GA, 1.52 mg/L for RE and 0.98 mg/L for EA with a 20 microL injection volume. The method was applied for the determination of these compounds in oak leaves and in ruminal fluid and urine samples taken from beef cattle fed with oak leaves. The proposed method could be used in ruminant nutrition studies to verify the effect that a diet rich in tannins have on ruminal fermentation and to determine the toxicity of these compounds.     

Separation and quantitation of several angiotensin II receptor antagonist drugs in human urine by a SPE-HPLC-DAD method

In this work, an SPE-HPLC method coupled to photodiode array detection was validated in human urine matrix, in order to monitor four antihypertensive angiotensin II receptor antagonist drugs in patients under cardiovascular treatment. For that purpose, experimental design was used. Quantitation was accomplished by the internal standard method. The obtained LOQs were 95, 113, 125, and 85 ng/mL for eprosartan, telmisartan, irbesartan, and valsartan, respectively. The intraday and interday precision and accuracy at four concentration levels in the working range (LOQ-15 microg/mL) were always lower than 11% RSD and 8% relative error. The urine samples proved to be stable during 4 h at room temperature, after three thaw-freeze cycles, and for 2 months at -20 degrees C. No interferences from other endogenous compounds or co-administered drugs were found. The method has been successfully applied to monitor the renal elimination of eprosartan and valsartan during 24 h.     

Lichens biomonitoring as feasible methodology to assess air pollution in natural ecosystems: Combined study of quantitative PAHs analyses and lichen biodiversity in the Pyrenees Mountains

The air quality in the Aragón valley, in the central Pyrenees, has been assessed by evaluation of lichen biodiversity and mapped by elaboration of the Index of Air Purity (IAP) based on observations of the presence and abundance of eight kinds of lichen with different sensitivity to air pollution. The IAP values obtained have been compared with quantitative analytical measures of 16 PAHs in the lichen Evernia prunastri, because this species was associated with a wide range of traffic exposure and levels of urbanization. Analyses of PAHs were carried out by the DSASE method followed by an SPE clean-up step and GC–MS analysis. The concentration of total PAHs found in lichen samples from the Aragón valley ranged from 692 to 6420 ng g⁻¹ and the PAHs profile showed predominance of compounds with three aromatic rings. The influence of the road traffic in the area has been shown because values over the median concentration of PAHs (>1092 ng g⁻¹), percentage of combustion PAHs (>50%), and equivalent toxicity (>169) were found in lichens collected at places exposed to the influence of traffic. The combination of both methods suggests IAP as a general method for evaluating the air pollution referenced to PAHs because it can be correlated with the content of combustion PAHs and poor lichen biodiversity can be partly explained by the air pollution caused by specific PAHs. Figure Map of the air pollution level in the Aragón valley (Pyrenees) based on the Index of Air Purity (IAP) calculation (lichen biodiversity)     

Immunosensor for the determination of <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> using a tyrosinase–mercaptopropionic acid modified electrode as an amperometric transducer

An amperometric immunosensor for the quantification of Staphylococcus aureus based on the coimmobilization of rabbit immunoglobulin G (RbIgG) and tyrosinase on a mercaptopropionic acid self-assembled monolayer modified gold electrode is reported. A competitive mode in which protein-A-bearing S. aureus cells and antiRbIgG labeled with alkaline phosphatase (AP) compete for the binding sites of immobilized RbIgG was used. Monitoring of the affinity reaction was carried out by the amperometric detection at -0.15 V of phenol generated in the enzyme reaction with AP, at the tyrosinase-modified electrode through the electrochemical reduction of the o-quinone formed. Optimization of the working variables, such as the immunosensor composition and incubation times, the applied potential, the working pH and the concentration of phenyl phosphate used as the AP substrate, was carried out. Under the optimized conditions, both the repeatability of the measurements and the reproducibility of the responses obtained with different immunosensors yielded relative standard deviation values for the steady-state current lower than 10%. The immunosensor showed a dynamic range from 4.4x10(5) to 1.8x10(7) S. aureus cells mL(-1), with a detection limit of 1.7x10(5) cells mL(-1). The limit of detection was remarkably improved by subjecting S. aureus cells to wall lysis by heat treatment. The value obtained was 2.3x10(3) cells mL(-1), which is adequate for the monitoring of S. aureus contamination levels in some foodstuffs. As an application, milk samples spiked with bacteria at the 4.8x10(3) cells mL(-1) level were analyzed.     

Calorimetric study of melts in the System KF - K<Subscript>2</Subscript>NbF<Subscript>7</Subscript>

The relative enthalpies of melts in the system KF - K₂NbF₇ were measured by drop-calorimetry at the temperatures 1058, 1140 and 1208 K as a function of composition. Heat capacities of melted mixtures and enthalpies of mixing were determined using the experimental data. The molar heat capacity of melts diverges slightly from additivity. The molar enthalpy of mixing of melts shows small negative deviation from ideality which decreases with decreasing temperature. The thermal effect at mixing was assigned predominantly to association reactions producing more complex fluoroniobate anions.      

Synthesis, thermal, spectroscopic and magnetic studies of the Mn(SeO3).2H2O and Fe2(SeO3)3.3H2O selenites

Mn(SeO(3)).2H(2)O (1) and Fe(2)(SeO(3))(3).3H(2)O (2) have been synthesized by slow evaporation from an aqueous solution in the case of (1) and using mild hydrothermal conditions for (2). The crystal structures of both phases have been refined by the Rietveld method. The compounds crystallize in different spatial groups, the P2(1)/n monoclinic one with parameters a=6.649(1)A, b=6.542(1)A, c=10.890(1)A and beta=103.85(1) degrees being Z=4 for (1) and the R3c trigonal space group with parameters a=9.361(1)A, c=20.276(1)A and Z=6 for (2). The crystal structure of compound (1) consists of a three-dimensional framework formed by MnO(6) octahedra and (SeO(3))(2-) oxoanions with trigonal pyramidal geometry, which gives rise to Mn(2)O(10) dimers of edge-sharing octahedra. The crystal structure of phase (2) can be described as a three-dimensional framework formed by MnO(6) octahedra and (SeO(3))(2-) oxoanions with trigonal pyramidal geometry. In this phase the octahedral entities are linked along the three crystallographic axes through the selenite anions. Diffuse reflectance spectrum and luminescent measurements for (1) indicate the existence of Mn(2+) cations in a slightly distorted octahedral environment. Diffuse reflectance spectrum and M?ssbauer spectroscopy, in the paramagnetic region, for (2) show the existence of Fe(3+) cations in slightly distorted octahedral symmetry. ESR spectra of both compounds are isotropic with a g-value of 1.99(1) and 2.00(1), respectively. Magnetic measurements of both phases indicate an antiferromagnetic behavior. For phase (2), both, the ESR and magnetic measurements suggest a spin change from Fe(3+) (S=5/2) to Fe(2+) (S=2) at low temperatures.     

Experimental correlation between the pKa value of sulfonphthaleins with the nature of the substituents groups

This work presents the results obtained from a spectrophotometry study performed on some indicators of the sulfonphtaleins like phenol red (PR), thymol blue (TB), bromothymol blue (BTB), xylenol orange (XO) and methylthymol blue (MTB). During the first stage the acidity constants of some of the indicators were determined using the data from spectrophotometry, potentiometry and with the use of the software SQUAD. These were as follows: for the equilibrium 2H+BTB<-->H(2)BTB, log beta(2)=15.069+/-0.046 and for H+BTB<-->HBTB, log beta(1)=8.311+/-0.044. For the XO and the MTB five values were calculated for each, namely, for MTB: log beta(5)=42.035, log beta(4)=38.567+/-0.058, log beta(3)=32.257+/-0.057, log beta(2)=23.785+/-0.057, and log beta(1)=12.974+/-0.045 while for XO: log beta(5)=40.120+/-0.102, log beta(4)=35.158+/-0.062, log beta(3)=29.102+/-0.053, log beta(2)=21.237+/-0.044, and log beta(1)=11.682+/-0.044. During the second stage, a study was conducted on the effect of the substituents present in the indicators to determine the effect of different functional groups on the pK(a) value corresponding to the last indicator's dissociation.