Kinetics of formation and dissociation of lanthanide(III) complexes with the 13-membered macrocyclic ligand TRITA4-

The tetraazamacrocyclic ligand TRITA(4-) is intermediate in size between the widely studied and medically used 12-membered DOTA(4-) and the 14-membered TETA(4-). The kinetic inertness of GdTRITA(-) was characterized by the rates of exchange reactions with Zn(2+) and Eu(3+). In the Zn(2+) exchange, a second order [H(+)] dependence was found for the pseudo-first-order rate constant (k(0)=(4.2 +/- 0.5) x 10(-7) s(-1); k'=(3.5 +/- 0.3) x 10(-1) M(-1)s(-1), k" =(1.4 +/- 0.4) x 10(3) M(-2)s(-1)). In the Eu(3+) exchange, at pH <5 the rate decreases with increasing concentration of the exchanging ion, which can be accounted for by the transitional formation of dinuclear GdTRITAEu(2+) species. At physiological pH, the kinetic inertness of GdTRITA(-) is considerably lower than that of GdDOTA(-)(t(1/2)= 444 h (25 degrees C) vs. 3.8 x 10(5) h (37 degrees C), respectively). However, GdTRITA(-) is still kinetically more inert than GdDTPA(2-), the most commonly used MRI contrast agent (t(1/2)= 127 h). The formation reactions of LnTRITA(-) complexes (Ln = Ce, Gd and Yb) proceed via the rapid formation of a diprotonated intermediate and its subsequent deprotonation and rearrangement in a slow, OH(-) catalyzed process. The stability of the LnH(2)TRITA* intermediates (log K(LnH2L*)= 3.1-3.9) is lower than that of the DOTA-analogues. The rate constants of the OH(-) catalyzed step increase with decreasing lanthanide ion size, and are about twice as high as for DOTA-complexes.     

Muffin-tin orbital Wannier-like functions for insulators and metals.

Herein, we outline a method that is able to generate truly minimal basis sets that accurately describe either a group of bands, a band, or even just the occupied part of a band. These basis sets are the so-called NMTOs, muffin-tin orbitals of order N. For an isolated set of bands, symmetrical orthonormalization of the NMTOs yields a set of Wannier functions that are atom-centered and localized by construction. They are not necessarily maximally localized, but may be transformed into those Wannier functions. For bands that overlap others, Wannier-like functions can be generated. It is shown that NMTOs give a chemical understanding of an extended system. In particular, orbitals for the pi and sigma bands in an insulator, boron nitride, and a semimetal, graphite, will be considered. In addition, we illustrate that it is possible to obtain Wannier-like functions for only the occupied states in a metallic system by generating NMTOs for cesium. Finally, we visualize the pressure-induced s-->d transition.     

Synthesis,characterization, and curing of hyperbranched allyl ether–maleate functional ester resins

A model two-step synthesis of a saturated hyperbranched hydroxyl-terminated ester has been developed to show a synthesis route. Three different series of hyperbranched esters with different terminations have been synthesized to relate some of their properties to their structures. This route has then been used to synthesize three different allyl ethermaleate functional hyperbranched ester resins in a two-step procedure. The resins have been characterized with respect to rheology, structure, and properties, and the differences are discussed. The allyl ether-maleate functional resins have also been studied with respect to curing performance and final film properties. © 1993 John Wiley & Sons, Inc.     

Comparison of reversed-phase liquid chromatography and hydrophilic interaction/cation-exchange chromatography for the separation of amphipathic alpha-helical peptides with L- and D-amino acid substitutions in the hydrophilic face

Mixed-mode hydrophilic interaction/cation-exchange chromatography (HILIC/CEX) is a novel high-performance technique which has excellent potential for peptide separations. Separations by HILIX/CEX are carried out by subjecting peptides to linear increasing salt gradients in the presence of high levels of acetonitrile, which promotes hydrophilic interactions overlaid on ionic interactions with the cation-exchange matrix. In the present study, HILIC/CEX has been compared to reversed-phase liquid chromatography (RP-HPLC) for separation of mixtures of diastereomeric amphipathic alpha-helical peptide analogues, where L- and D-amino acid substitutions were made in the centre of the hydrophilic face of the amphipathic alpha-helix. Unlike RP-HPLC, temperature had a substantial effect on HILIC/CEX of the peptides, with a rise in temperature from 25 to 65 degrees C increasing the retention times of the peptides as well as improving resolution. Our results again highlight the potential of HILIC/CEX as a peptide separation mode in its own right as well as an excellent complement to RP-HPLC.     

Search on ruggedness of fast gas chromatography-mass spectrometry in pesticide residues analysis

In this study, suitability of fast gas chromatography-mass spectrometry (GC-MS) on a narrow-bore column with a programmed temperature vaporizer for the analysis of pesticide residues in non-fatty food was evaluated. The main objectives were ruggedness and stability of chromatographic system with regards to co-extractives injected. The chromatographic matrix induced response enhancement was found to be strongly dependent on the concentration of residues and is reaching up to 700% compared to the pesticides solutions in a neat solvent. However, the responses of pesticides in matrix-matched standards at different concentration levels do not significantly change during 130 injections. Response enhancement/or decrease is influenced by the sample preparation technique. External calibration with matrix-matched calibration standards should, therefore, provide results with good precision also at the concentration level of 0.005 mg kg(-1). Special attention is given to the performance of the chromatographic column and retention gap with regards to peak widths, peak tailing and different sample preparation methods. During approximately 460 matrix sample injections, the performance of the analytical column was acceptable. GC-MS set-up with 0.15 mm i.d. column can be successfully utilized for the pesticide residues analysis.     

Glycosylidene Carbenes. Part 18. Insertion of glycosylidene carbenes into the Sn?H bond of tributyl- and triphenylstannane: A synthesis of stannoglycosides

Insertion of the glycosylidene carbenes, derived from the gluco- and the manno-diazirines 1 and 2 , into the Sn? H bond of R₃SnH (R = Bu or Ph) leads to the fully substituted stannoglycosides 3 – 8 (53–77%). The 1,2-cis-configurated products are formed preferentially (α-D /β -D ranges from 2.5:1 to 5.1:1 with 1 , and 1:1.3 to 1:4.2 with 2 ). Relative to CH₂Cl₂, THF favors formation of the equatorial Sn-glycosides. The stannylated (benzyloxy)glucals 9 and 10 were isolated as side products. The reaction of 1 with (Bu₃Sn)₂ yielded 9 (17% in CH₂Cl₂; 36% in CCl₄) together with the azines 11 and the benzyloxyglucal 12 . NMR Data of the Sn-glycosides 3 – 8 show evidence for an anomeric effect, ¹J(C(1),H) being larger in the axial and ¹J(Sn,C(1)) larger in the equatorial anomers.     

Flavonoids in Leguminosae: analysis of extracts of T. pratense L., T. dubium L., T. repens L., and L. corniculatus L. leaves using liquid chromatography with UV, mass spectrometric and fluorescence detection

Reversed-phase LC on C-18 bonded silica with a methanol–ammonium formate gradient was used to determine the main flavonoids in leaves of four species of the Leguminosae family. The detection modes were diode-array UV absorbance, fluorescence, and (tandem) mass spectrometry. LC–UV was used for a general screening, sub-classification, and the calculation of total flavonoid contents. LC–FLU was included to identify isoflavones on the basis of their native fluorescence. Most structural information regarding aglycons, sugar moieties, and acidic groups was derived from LC–MS in both the full-scan and extracted-ion mode, using negative-ion atmospheric pressure chemical ionization. MS/MS did not provide much additional information, because the same fragments were observed as in full-scan MS.In T. pratense and T. repens, the main constituents were flavonoid glucoside–(di)malonates, while T. dubium and L. corniculatus mainly contained flavonoid (di)glycosides. Satellite sets comprising an aglycon, the glucoside and glucoside–malonates or –acetates, were abundantly present only in T. pratense. Generally speaking, the main aglycons and sugars in the four plant species are surprisingly different. In addition, while the results for T. pratense are similar to those reported in the literature, there is little agreement in the case of the other species. Finally, total flavonoid contents ranged from 50–65 mg/g for L. corniculatus and T. dubium, to 15 mg/g for T. pratense and only 1 mg/g for T. repens.     

Synthesis of beta-lactams from a N-rhenaimine: effect of the transition metal on the energetic profile of the Staudinger reaction

As depicted in the scheme, the alkylidenamido complex 1, a N-rhenaimine, reacts with ketenes to afford the beta-lactams 2-4, which possess a {Re(CO)3(bpy)} fragment as substituent at nitrogen. Clean demetalations using HOTf or MeOTf yield the free beta-lactams or N-methyl-beta-lactams along with [Re(OTf)(CO)3(bpy)]. DFT calculations help to rationalize why the reaction is faster than those of non transition metal N-substituted imines.     

Binary and Ternary Complexes Between Lauryl Hexaoxyethylene, Benzoate and Cyclodextrin. Part II. β-CD

The characterization of binary and ternary complexes of benzoate, lauryl hexaoxyethylene (C₁₂E₆) and -CD is presented. The complexation equilibrium was characterized by UV-Vis spectrophotometry, titration microcalorimetry, capillary electrophoresis, and 2D ROESY ¹H-NMR. Results suggested that -CD forms one complex with C₁₂E₆in the stoichiometric ratio of -CD : C₁₂E₆1.5 : 1, with a stability constant 1.3 × 10⁵ M^-1.5. The 2-D ROESY ¹H-NMR spectrum indicated that C₁₂E₆is included inside the -CD cavity. The primary binding site of C₁₂E₆ is on the lauryl subunit of this molecule. Analogous to a previously reported study of -CD, the combination of -CD and C₁₂E₆precipitated from the solution. Addition of benzoate seemed to dissolve the precipitate and nearly doubled the apparent stability constant of the complex. Results from the various techniques supported formation of ternary complexes between -CD, C₁₂E₆, and benzoate.