Interactive effects of pore size control and carbonization temperatures on supercapacitive behaviors of porous carbon/carbon nanotube composites

Porous carbon-based electrodes were prepared by carbonization with poly(vinylidene fluoride) (PVDF)/carbon nanotube (CNT) composites to further increase the specific capacitance for supercapacitors. The specific capacitance, pore size distribution, and surface area of the PVDF/CNT composites were measured, and the effect of the carbonization temperatures was examined. The electrochemical properties were examined by cyclic voltammetry, impedance spectroscopy, and galvanostatic charge-discharge performance using a two-electrode system in TEABF(4) (tetraethylammonium tetrafluoroborate)/acetonitrile as a non-aqueous electrolyte. The highest specific capacitance of ～101 Fg(-1) was obtained for the samples carbonized at 600 °C. The pore size of the samples could be controlled to below 7 nm through the carbonization process. This suggests that micropores make a significant contribution to the specific capacitance due to improved charge transfer between the pores of the electrode materials and the electrolyte.     

Effect of surfactant on retention behaviors of polystyrene latex particles in sedimentation field-flow fractionation: effective boundary slip model approach

A retention theory in sedimentation field-flow fractionation (SdFFF) was developed by exploiting the effective slip boundary condition (BC) that allows a finite velocity for particles to have at the wall, thereby alleviating the limitations set by the no-slip BC constraint bound to the standard retention theory (SRT). This led to an expression for the retention ratio R as R = (R(o) + v*(b))/(R(o) + v*(b)), where R(o) is the sterically corrected SRT retention ratio and v*(b) is the reduced boundary velocity. Then, v*(b) was modeled as v*(b) = v*(b,o)/[1 + (7K*S(o))(1/2)], where S(o) is the surfactant (FL-70) concentration and K* is the distribution coefficient associated with the langmuirian isotherm of the apparent effective mass against S(o). We applied this to study the surfactant effect on the retention behaviors of polystyrene (PS) latex beads of 170-500 nm in diameter. As a result, an empirical relation was found to hold between v*(b,o) and d(o) (estimated from R(o) at S(o) = 0) as v*(b,o) - v*(o,o)[1 - (d(c)/d(o))], where v*(o,o) is the asymptotic value of v*(b,o) in the vanishing d(c)/d(o) limit and d(c) is the cutoff value at which v*(b,o) would vanish. According to the present approach, the no-slip BC (v*(b,o) = 0) was predicted to recover when d(o) ～ d(c), and the boundary slip effect could be significant for S(o) ≤ 0.05%, particularly for large latex beads.     

Profiling surface glycans on live cells and tissues using quantum dot-lectin nanoconjugates

The surface of mammalian cells is densely coated with complex glycans, which are directly involved in cell-cell or cell-protein interactions that trigger various biological responses. Here, we present a novel glycomics approach that uses quantum dot (Qdot)-lectin nanoconjugates to interrogate the surface glycans of tissues and patterned cells. Our approach allows highly sensitive in situ monitoring of specific lectin-glycan interactions and quantitative information on surface glycans for each examined cell line and tissue. The results clearly show significant changes in glycosylation for each cell line and tissue sample. We expect that these results will be applicable in cancer diagnostics and promote the development of new analytical tools for glycomics.     

Two-photon fluorescence microscopy imaging of cellular oxidative stress using profluorescent nitroxides

A range of varying chromophore nitroxide free radicals and their nonradical methoxyamine analogues were synthesized and their linear photophysical properties examined. The presence of the proximate free radical masks the chromophore's usual fluorescence emission, and these species are described as profluorescent. Two nitroxides incorporating anthracene and fluorescein chromophores (compounds 7 and 19, respectively) exhibited two-photon absorption (2PA) cross sections of approximately 400 G.M. when excited at wavelengths greater than 800 nm. Both of these profluorescent nitroxides demonstrated low cytotoxicity toward Chinese hamster ovary (CHO) cells. Imaging colocalization experiments with the commercially available CellROX Deep Red oxidative stress monitor demonstrated good cellular uptake of the nitroxide probes. Sensitivity of the nitroxide probes to H(2)O(2)-induced damage was also demonstrated by both one- and two-photon fluorescence microscopy. These profluorescent nitroxide probes are potentially powerful tools for imaging oxidative stress in biological systems, and they essentially "light up" in the presence of certain species generated from oxidative stress. The high ratio of the fluorescence quantum yield between the profluorescent nitroxide species and their nonradical adducts provides the sensitivity required for measuring a range of cellular redox environments. Furthermore, their reasonable 2PA cross sections provide for the option of using two-photon fluorescence microscopy, which circumvents commonly encountered disadvantages associated with one-photon imaging such as photobleaching and poor tissue penetration.     

Continuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid

Pure separation and sorting of microparticles from complex fluids are essential for biochemical analyses and clinical diagnostics. However, conventional techniques require highly complex and expensive labeling processes for high purity separation. In this study, we present a simple and label-free method for separating microparticles with high purity using the elasto-inertial characteristic of a non-Newtonian fluid in microchannel flow. At the inlet, particle-containing sample flow was pushed toward the side walls by introducing sheath fluid from the center inlet. Particles of 1 μm and 5 μm in diameter, which were suspended in viscoelastic fluid, were successfully separated in the outlet channels: larger particles were notably focused on the centerline of the channel at the outlet, while smaller particles continued flowing along the side walls with minimal lateral migration towards the centerline. The same technique was further applied to separate platelets from diluted whole blood. Through cytometric analysis, we obtained a purity of collected platelets of close to 99.9%. Conclusively, our microparticle separation technique using elasto-inertial forces in non-Newtonian fluid is an effective method for separating and collecting microparticles on the basis of size differences with high purity.     

First examples of cyano-bridged complexes based on a novel cluster anion [Re<Subscript>12</Subscript>C<Subscript>17</Subscript>(CN)<Subscript>6</Subscript>]<Superscript>6−</Superscript>

Two cyano-bridged compounds of novel dodecanuclear cluster anion [Re₁₂CS₁₇(CN)₆] with Ni²⁺ cations were synthesized, namely, one-dimensional polymer of the composition [{Ni(NH₃)₄} {Ni(NH₃)₅}₂Re₁₂CS₁₇(CN)₆] · 7H₂O (I) with a chain structure and [Ni(NH₃)₆]₃[{Ni(NH₃)₄}₃ {Re₁₂CS₁₇(CN)₆}₂] · 21H₂O (II), containing the anionic dimeric complex [{Ni(NH₃)₄}₃ {Re₁₂CS₁₇(CN)₆}₂]^6?. The structures of both compounds were established by X-ray diffraction analysis. Crystals I are monoclinic, space group P2/n, a = 15.321(3), b = 12.635(2), c = 15.448(3) Å, β = 100.242(3)°, V = 2942.8(8) ų, Z = 2. Crystals II are trigonal, space group R3, a = b = 19.7987(14), c = 28.8642(18) Å, V = 9798.6(12) ų, Z = 3.     

Reactivity of acid fluoride-terminated self-assembled monolayers on gold

This report describes the reactivity of acid fluoride (AF)-terminated self-assembled monolayers (SAMs) on gold toward amine and alcohol compounds and the potentiality of AF as a reactive intermediate for surface functionalizations. The AF group was generated in situ on a gold surface by reacting the terminal carboxylic acid group in the SAM of 16-mercaptohexadecanoic acid with cyanuric fluoride and pyridine under the optimized conditions. AF was found to be highly reactive toward various amine groups, such as primary and secondary amines, but it did not react effectively with alcohol. In addition, the amide coupling reaction by microcontact printing (microCP) was compared with the solution-based reaction: when amine-derivatized ferrocene compound was used for 1-min microCP on the AF-activated surface, the surface coverage of the reaction product was about 83% of 3.45 x 1014 cm-2, the coverage obtained in the solution-based reaction. On the basis of the high reaction efficiency of microCP, the AF-activated surface was also used as a platform for patterning a biological ligand, biotin.     

Picosecond multidimensional fluorescence spectroscopy: a tool to measure real-time protein dynamics during function

Advanced multidimensional time-correlated single photon counting (mdTCSPC) and picosecond time-resolved fluorescence in combination with site-directed fluorescence labeling are valuable tools to study the properties of membrane protein surface segments on the pico- to nanoseconds time scale. Time-resolved fluorescence anisotropy changes of protein bound fluorescent probes reveal changes in protein dynamics and steric restriction. In addition, the change in fluorescence lifetime and intensity of the covalently bound fluorescent dye is indicative of environmental changes at the protein surface. In this study, we have measured the changes in fluorescence lifetime traces of the fluorescent dye fluorescein covalently bound to the first cytoplasmic loop of bacteriorhodopsin (bR) after light activation of protein function. The fluorescence is excited by a picosecond laser pulse. The retinylidene chromophore of bR is light-activated by a 10 ns laser pulse, which in turn triggers recording of a sequence of fluorescence lifetime traces in the mdTCSPC-module. The fluorescence decay changes upon protein function occur predominantly in the 100 ps time range. The kinetics of these changes shows two transitions between three intermediate states in the second part of the bR photocycle. Correlation with photocycle kinetics allows for the determination of reaction intermediates at the proteins surface which are coupled to changes in the retinal binding pocket.     

Chiral molecular squares based on angular bipyridines: self-assembly, characterization, and photophysical properties

Chiral molecular squares 1-12 based on [M(dppe)](2+) metallocorners (M = Pd or Pt, and dppe = bis(diphenylphosphino)ethane) and new angular bipyridine bridging ligands derived from the 1,1'-binaphthyl framework were readily assembled and characterized by a variety of techniques including infrared, UV-vis, circular dichroism (CD), and NMR spectroscopy, and ESI mass spectrometry. All these chiral metallocycles are highly luminescent in solution at room temperature with quantum efficiency of 0.06-0.63. Interestingly, when equal molar enantiopure molecular squares of opposite handedness were mixed in solution, a new meso dimeric metallocycle with C(2) symmetry formed. This result indicates the lability of the M-pyridyl bonds in these metallocycles, which may hinder their applications in many enantioselective processes.     

Simple and extractionless high-performance liquid chromatographic determination of rosiglitazone in human plasma and application to pharmacokinetics in humans

A simple and extractionless HPLC method using fluorescence detection was developed for the determination of rosiglitazone in human plasma. After deproteinization using perchloric acid the plasma samples were directly injected onto the HPLC system. The mobile phase was composed of acetonitrile (52%) and 20 mm ammonium acetate (48%, pH 7.5), and analysis was run at a flow rate of 0.2 mL/min with the detector operating at 247 nm for excitation wavelength and at 367 nm for emission wavelength, respectively. The method has a mean recovery of 97%, while the intra-day and inter-day precisions were all less than 7%. This method is simple, specific, sensitive and requires only a small plasma volume with short analytical time, and is suitable for the determination of plasma rosiglitazone in routine measurements for pharmacokinetic studies.