Observation of Q-spoiling ef fects on the resonance modes from a noncircularly deformed liquid jet

Spectral changes in fluorescence and lasing spectra were observed from a noncircularly deformed ink-doped ethanol jet, which was induced by a lateral gas flow. The distortion parameter was determined from the analysis of diffraction patterns to be as much as ~10%. Q -spoiling effects were clearly observed in the appearance of high- Q (~10(7)) modes in fluorescence and their disappearance in lasing. From the behavior of resonance modes, we concluded that the effective Q does not decrease so rapidly as predicted by the relation obtained from the ray-optics model. We also found that the signals leak out, with a wide angular spreading, mainly from near the boundary of the major axis, even for a large distortion parameter.     

Preparation and characterization of N‐methyl‐substituted polyurethane

We prepared N‐methyl‐substituted polyurethanes with different substitution degrees from sodium hydride, methyl p‐toluene sulfonate, and polyether–polyurethane containing poly(oxytetramethylene) glycol, 4,4′‐diphenylmethane diisocyanate, and 1,4‐butanediol. The chemical structures were characterized with Fourier transform infrared and ¹H NMR. To investigate the effects of the N‐substitution degree on the morphology, thermal stability, and mechanical properties, we used differential scanning calorimetry, thermogravimetric analysis, and a universal testing machine. As the substitution degree increased, the new free (1708 cm^?1) and bonded (1650 cm^?1) carbonyl peaks increased. There was no bonded carbonyl peak in fully substituted polyurethane because the urethane groups had no hydrogen. At a small substitution degree, we observed a slight increase in the glass‐transition temperature and decrease in the endotherms of soft‐segment and hard‐segment domains due to the decrease in the hard‐segment domain and the increase in the urethane groups in the soft‐segment domain. The hard‐segment domain decreased and then disappeared as the N‐methyl substitution degree increased. These changes in the morphology resulted (1) in decreased modulus and tensile strength for the films because of the decrease in physical crosslinking points and (2) improved thermal stability as the substitution degree increased. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4077–4083, 2002     

Total syntheses of (+)-chloropuupehenone and (+)-chloropuupehenol and their analogues and evaluation of their bioactivities

Tetracyclic pyrans (+)-chloropuupehenone (1) and (+)-chloropuupehenol (5) and its C8-R-isomer (+)-3 were synthesized via a one-pot condensation of 1-chloro-2-lithio-3,5,6-tris(tert-butyldimethylsilyloxy)benzene (8) with (4aS,8aS)-3,4,4a,5,6,7,8,8a-octahydro-2,5,5,8a-tetramethylnaphthalene-1-carboxaldehyde (7). The major condensation product, (4aS,6aR,12bS)-2H-9,10-bis(tert-butyldimethylsilyloxy)-11-chloro-1,3,4,4a,5,6,6a,12b-octahydro-4,4,6a,12b-tetramethyl-benzo[a]xanthene (4), after desilylation provided tetracyclic pyran (+)-(4aS,6aR,12bS)-2H-11-chloro-1,3,4,4a,5,6,6a,12b-octahydro-4,4,6a,12b-tetramethyl-benzo[a]xanthene-9,10-diol (3). At a dosage of 42 mg/rat over 8 h, pyran diol 3 inhibited the intestinal absorption of cholesterol by 71% in rats. Tetracyclic pyran 4 was also converted to o-quinone 28, which inhibited cholesteryl ester transfer protein (CETP) activity and L1210 leukemic cell viability with IC(50) values of 31 and 2.4 microM, respectively. Diol (+)-5 inhibited CETP activity with an IC(50) value of 16 microM. The minor condensation product, (4aS,6aS,12bS)-2H-9,10-bis(tert-butyldimethylsilyloxy)-11-chloro-1,3,4,4a,5,6,6a,12b-octahydro-4,4,6a,12b-tetramethyl-benzo[a]xanthene (6), was transformed into (+)-5 and (+)-1. A stepwise stereoselective synthesis of (+)-1 was also developed utilizing an oxyselenylation ring-closure reaction. The synthetic sequence also produced four biologically active naturally occurring drimanic sesquiterpenes, (+)-drimane-8alpha,11-diol (34), (-)-drimenol (38), (+)-albicanol (39), and (-)-albicanal (31) as intermediates.     

Nitrogen‐Doped Carbon Nanomaterials: Synthesis,Characteristics and Applications

Nonmetallic carbon‐based nanomaterials (CNMs) are important in various potential applications, especially after the emergence of graphene and carbon nanotubes, which demonstrate outstanding properties arising from their unique nanostructures. The pristine graphitic structure of CNMs consists of sp² hybrid C?C bonds and is considered to be neutral in nature with low wettability and poor reactivity. To improve its compatibility with other materials and, hence, for greater applicability, CNMs are generally required to be functionalized effectively and/or doped with heteroatoms in their graphitic frameworks for feasible interfacial interactions. Among the various possible functional/doping elements, nitrogen (N) atoms have received much attention given their potential to fine tune the intrinsic properties, such as the work‐function, charge carrier concentration, surface energy, and polarization, of CNMs. N‐doping improves the surface energy and reactivity with enhanced charge polarization and minimal damage to carbon frameworks. The modified surface energy and chemical activity of N‐doped carbon nanomaterials (NCNMs) can be useful for a broad range of applications, including fuel cells, solar cells, Li‐ion batteries, supercapacitors, chemical catalysts, catalyst supports, and so forth.     

Homogeneous alignment of liquid crystals on low-temperature solution-derived gallium oxide films via IB irradiation method

In this paper, solution-derived gallium oxide (GaO) films are fabricated for the homogeneous alignment of liquid crystals (LCs) after an ion-beam (IB) irradiation process. GaO thin films are prepared under a variety of temperatures and different IB irradiation intensities, and the physicochemical performances of the fabricated GaO thin films are analysed using a UV-vis spectrometer, an atomic force microscope, and X-ray photoelectron spectroscopy. A higher transmittance of 85.40% from GaO thin film is obtained compared with that of polyimide (PI) film (83.52%), which indicates the feasibility for a GaO thin layer to substitute for a conventional PI layer as an alignment layer. LCs are found to align on the GaO thin film after pre-baking at 100°C and homogeneous and uniform low-IB intensity irradiation. We also determined the electro-optical (EO) characteristics of the twisted nematic (TN) cells fabricated with GaO thin layers and found them to be similar to those of cells fabricated with PI layers. Overall, GaO films achieved via the IB irradiation method are promising LC alignment layers due to the method’s low-temperature solution-derived process.     

Proteomic Evaluation of Biomarkers to Determine the Postmortem Interval

Proteomics separates and analyzes proteins for investigation at the cellular level in regard to disease processing by analyzing the proteins’ expression, function, structure, post-translational modification, and protein–protein interaction. In general forensic investigations, the postmortem interval was evaluated by measuring changes in body temperature after death, along with forensic entomological knowledge. These investigations may be restrictive and subjective because of external factors. The objectives of this study are to sort biomarker candidates and develop a direct postmortem-interval characterization method using proteomics through analyzing and tracking down proteins in the deceased that change in accordance with the postmortem interval. The liver and heart tissues of rats were collected for protein extraction in the 24-h interval following death, and two-dimensional sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis was conducted based on the isoelectric point and the molecular weight for separation. To validate protein spot changes on the gel, the stained electrophoresis gels were scanned and converted to digital images. Through image analysis, 14 liver proteins and 12 heart proteins were sorted and classified into four groups based on pattern changes. These proteins containing spots were extracted from the gel and analyzed by high-performance liquid chromatography with tandem mass spectrometry. Finally, 26 protein postmortem-interval relevant biomarker candidates were identified using software. Some of the proteins were muscle proteins while others were oxidation-related proteins. This study presents a new approach to the postmortem-interval research using proteomics and could be substituted for postmortem-interval evaluation.     

Quantitative determination of sparfloxacin in rat plasma by liquid chromatography/tandem mass spectrometry

Sparfloxacin, a fluoroquinolone antibiotic, is used for the treatment of bacterial infection. A quantification method using mass spectrometry was developed for the determination of sparfloxacin in rat plasma. After simple protein precipitation with acetonitrile, the analytes were chromatographed on a reversed‐phase C₁₈ column and detected by liquid chromatography/tandem mass spectrometry with electrospray ionization. The accuracy and precision of the assay were in accordance with FDA regulations for validation of bioanalytical methods. This method was applied to measure the plasma sparfloxacin concentrations after a single oral administration of sparfloxacin in rats. Copyright © 2010 John Wiley & Sons, Ltd.