Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Determination of micro‐RNA in cardiomyoblast cells using CE with LIF detection

Micro‐RNAs (miRNAs) are small, endogenous, singlestranded, and noncoding RNAs. The miRNAs have been found to perform important functions in many cellular processes, such as development, proliferation, differentiation, and apoptosis. Circulating miRNAs have been proposed as emerging biomarkers in diseases such as cancer, diabetes, and cardiovascular disease including acute myocardial infarction (AMI). In this study, we developed CE with LIF (CE‐LIF) using fluorescence‐labeled DNA probe for determination of low abundance miRNA in cell extracts. The target miRNA is miRNA‐499, a biomarker candidate of AMI with low abundance in biological samples. In order to measure the trace level of miRNA, we optimized the hybridization conditions such as hybridization time, temperature, and buffer solution. The highest fluorescence intensity of the hybridized miRNA‐499 was found when hybridization was conducted at 40°C in 50 mM Tris‐acetate (pH 8.0) buffer containing 50 mM NaCl, and 10 mM EDTA for 15 min. The hybridized miRNA‐499 was detected in cultured H9c2 cardiomyoblast cells and the analysis of miRNA‐499 was completed within 1 h using CE‐LIF. These results showed the potential of CE for fast, specific, and sensitive high‐throughput analysis of low‐abundance miRNAs in cell extracts, biofluids, and tissues.     

Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

Fluorescent staining of protein in SDS polyacrylamide gels by salicylaldehyde azine

As a noncovalent fluorescence probe, in this study, salicylaldehyde azine (SA) was introduced as a sensitive fluorescence‐based dye for detecting proteins both in 1D and 2D polyacrylamide electrophoresis gels. Down to 0.2 ng of single protein band could be detected within 1 h, which is similar to that of glutaraldehyde‐silver stain, but approximately four times higher than that of SYPRO Ruby fluorescent stain. Furthermore, comparative analysis of the MS compatibility of SA stain with SYPRO Ruby stain indicated that SA stain is compatible with the downstream of protein identification by LC‐MS/MS. Additionally, the probable mechanism of the SA stain was investigated by molecular docking. The results demonstrated that the interaction between SA and protein was mainly contributed by hydrogen bonding and hydrophobic forces.     

A valence bond model for aqueous Cu(II) and Zn(II) ions in the AMOEBA polarizable force field

A general molecular mechanics (MM) model for treating aqueous Cu²⁺ and Zn²⁺ ions was developed based on valence bond (VB) theory and incorporated into the atomic multipole optimized energetics for biomolecular applications (AMOEBA) polarizable force field. Parameters were obtained by fitting MM energies to that computed by ab initio methods for gas‐phase tetra‐ and hexa‐aqua metal complexes. Molecular dynamics (MD) simulations using the proposed AMOEBA‐VB model were performed for each transition metal ion in aqueous solution, and solvent coordination was evaluated. Results show that the AMOEBA‐VB model generates the correct square‐planar geometry for gas‐phase tetra‐aqua Cu²⁺ complex and improves the accuracy of MM model energetics for a number of ligation geometries when compared to quantum mechanical (QM) computations. On the other hand, both AMOEBA and AMOEBA‐VB generate results for Zn²⁺–water complexes in good agreement with QM calculations. Analyses of the MD trajectories revealed a six‐coordination first solvation shell for both Cu²⁺ and Zn²⁺ ions in aqueous solution, with ligation geometries falling in the range reported by previous studies. © 2012 Wiley Periodicals, Inc.     

The State of NaOH in NaOH/Poly(Sodium Acrylate) Composite

NaOH/poly(sodium acrylate) composites were prepared by in situ polymerization of acrylic acid with an overneutralization level by adding excess NaOH. The composites were studied by XRD, IR and ²³Na MAS NMR spectroscopy. The results showed that the high neutralization degree (>100%) may lead to a complete polymerization. Both XRD and ²³Na MAS NMR spectra did not show any peaks of phase-separated NaOH or Na₂CO₃ until the neutralization degree was up to 217.5%. It can be presumed that the aggregates of Na⁺ ions can contain approximately two Na⁺ units for every carboxyl group before the phase separation.     

After‐Rinsing Hair Growth Promotions of Hinokitiol‐Containing Vesicles and Emulsions

Two kinds of topical dosage forms of hinokitiol (HKL), namely vesicles and oil‐in‐water (O/W) emulsions, were prepared. Behenyl trimethylammonium chloride (BTMAC) and fatty acids were used as bilayer‐forming materials of the vesicles, and oils were employed as oil phases of the emulsions. The substantivity of HKL in the preparations was evaluated in vitro using hairless mouse skins. After applying the preparations onto the skin and rinsing it, the amount of HKL left on the skin was determined using high performance liquid chromatography (HPLC). It was higher when HKL was encapsulated in cationic vesicles rather than in nonionic vehicles, emulsions. An ionic interaction between the cationic vehicle and negatively charged skin is likely to account for the high substantivity. Among the emulsion preparations, an emulsion having octyl salicylate as oil phase exhibited the highest substantivity of HKL. This is probably because that the oil is a good solvent for HKL and it is skin‐retentive. In vivo hair growth‐promotion effect of each dosage form was investigated, where the sample application onto the clipped backs of female mice (C57BL6) and the subsequent rinsing of the backs were done once a day for 30 days. Only HKL in the cationic vesicles had hair growth promotion effect, possibly due to the significant substantivity.     

A Facile Method for Preparation of Superhydrophobic Surfaces with Poly(furfuryl Alcohol)/PTFE Composites

A stable superhydrophobic surface have been fabricated with poly(furfuryl alcohol) (PFA)/polytetrafluoroethylene (PTFE) composite coatings on steel substrates by using a facile method. The observation of field emission scanning electron microscopy revealed that the hierarchical microstructures formed on the surfaces are controlled by varying the curing temperature. This method can be easily operated on substrates of steel, therefore is readily developed to other engineering metal substrates such as aluminum, copper, etc.     

Novel high birefringence bistolane liquid crystals with lateral fluorosubstituent

Twelve compounds based on lateral fluorinated bistolane moieties with cyano or trifluoromethyl terminal groups were synthesised with Hagihara–Sonogashira cross-coupling reaction. The molecular structures of the compounds were confirmed by Fourier transform infrared, ¹H-nuclear magnetic resonance and mass spectrometry. The transition temperatures, optical textures and optical anisotropies were determined by differential scanning calorimetry, polarizing optical microscopy and ultraviolet microscopy. The effects of the terminal substituents and lateral fluorosubstituent group on their physical properties were investigated and discussed. The compounds with lateral double fluorosubstituent and cyano terminal group exhibited nematogenic texture, while other compounds showed smectic phase. All the compounds exhibited wide liquid crystal temperature ranges and high clearing points. Interestingly, the compounds have the high birefringence in the range of between 0.480 and 0.633.     

Synthesis and characterization of ionic liquids: viologen bis{tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} salts

Several viologen bis{tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} salts were prepared by metathesis reaction of the corresponding viologen dibromides (diiodide) with sodium bis{tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} salt in a polar organic solvent. They were characterized for their physical and thermal properties by experimental techniques including variable temperature X‐ray diffraction. All exhibited low T _g and T _m, and their T _g/T _m (K) ratios were in the range 0.66–0.79. Several exhibited polymorphism and formed isotropic ionic melts at <150°C. They were soluble in many common organic solvents such as ethers, alcohols, acetonitrile and methylene chloride. They exhibited photoluminescence in both 1,2‐dimethoxyethane and methanol, as well as in the solid state. In the solid state, the emission spectra exhibited hypsochromic shift when compared with those in solutions of 1,2‐dimethoxyethane and methanol.