Remote characterization of defects in plates with viscoelastic coatings using guided waves

The remote inspection for defects in large metallic elements such as pipes, tubes and plates is a field where guided waves are being applied with success. There are a number of situations where a surface coating is added for corrosion protection or insulation purposes. Since the coating materials are usually viscoelastic, the guided wave inspection range may be severely reduced unless a proper mode and an adequate frequency range is selected. Previous authors found the existence of low-attenuated modes at certain frequency ranges, which were used to detect and locate defects at reasonably large distances. This paper studies the potential of guided waves for not only locating but also sizing defects in plates with viscoelastic coatings. A hybrid finite element-boundary element method which explicitly includes the attenuating characteristics of the coating is used to determine Lamb and SH mode conversion factors at corrosion defects under the coating. Through parametric studies and analysis of the numerical results, some trends and features are highlighted that could be used for sizing purposes.     

Dynamic processes in the Venice region outlined by environmental isotopes

Research carried out in the last 40 years has shown the scientific importance of groundwater circulation both in the Northern Adriatic sea bed and within the uppermost sedimentary layers of the Venice lagoon and of the Venice plain. Hydrodynamic processes are strictly controlled by a well-cemented sedimentary horizon lying under and around Venice ('caranto'), which plays the role of regional aquitard. This layer was attributed to the subaerial cementation of the Flandrian (8-10 ka Before Present) sedimentary surface. The caranto is generalised as a continuum horizon, being an easy explanation for several environmental, hydrogeological and geotechnical problems, e.g., a base layer for landfills, a confining layer for deep aquifers and the best substratum for locating the oak wooden pile-dwelling needed to support the largest buildings. The preservation of the isotope signal within the deep aquifers and aquiclude system records the changes in surface and groundwater characteristics and suggests the present and past recharge regimes. In this region, the heavily perturbed hydrodynamic conditions do not allow for the use of isotopic signals to derive a correct reconstruction of the present recharge. The perturbations induced by the intensive anthropogenic activity force to follow climate evolution by considering deep groundwater and pore waters. In addition, the presence of carbonatic rocks inside terrigeneous sediments affects the reconstruction of the past. Results indicate that carbonatic rocks are created by seepage, through the sediments, of gaseous carbon compounds from decaying organic layers. The gas interactions with the intra-sedimentary saline and fresh waters produce CO2, inducing the cementation of the sediments.     

High-speed horizontal-path atmospheric turbulence correction with a large-actuator-number microelectromechanical system spatial light modulator in an interferometric phase-conjugation engine

Results of atmospheric propagation for a high-speed, large-actuator-number adaptive optics system are presented. The system uses a microelectromechanical system- (MEMS-) based spatial light modulator correction device with 1024 actuators. Tests over a 1.35-km path achieved correction speeds in excess of 800 Hz and Strehl ratios close to 0.5. The wave-front sensor was based on a quadrature interferometer that directly measures phase. This technique does not require global wave-front reconstruction, making it relatively insensitive to scintillation and phase residues. The results demonstrate the potential of large-actuator-number MEMS-based spatial light modulators to replace conventional deformable mirrors.     

EPR spectroscopy of protein microcrystals oriented in a liquid crystalline polymer medium

Correlation of the g-tensor of a paramagnetic active center of a protein with its structure provides a unique experimental information on the electronic structure of the metal site. To address this problem, we made solid films containing metalloprotein (Desulfovibrio gigas cytochrome c(3)) microcrystals. The microcrystals in a liquid crystalline polymer medium (water/hydroxypropylcellulose) were partially aligned by a shear flow. A strong orientation effect of the metalloprotein was observed by EPR spectroscopy and polarizing optical microscopy. The EPR spectra of partially oriented samples were simulated, allowing for molecular orientation distribution function determination. The observed effect results in enhanced sensitivity and resolution of the EPR spectra and provides a new approach towards the correlation of spectroscopic data, obtained by EPR or some other technique, with the three-dimensional structure of a protein or a model compound.     

Time structure of iodine laser pulse in the free running mode of operation

Time structure of iodine laser pulse in the free running mode of operation was studied using the power amplifier of laser system PERUN as the laser oscillator. Two characteristic shapes of laser pulse correspond to different regimes of laser operation, the existence of which is ascribed to the critical concentration of I₂ molecules. Simultaneously an additional chemical pumping was proved at least in the initial phase of photodissociation and in a late-time lasing after the end of flashlamps pumping light.     

Influence of solute mobility on dislocation motion I. Basic model

Dislocation motion in the real lattice of alloys is highly complex. In a certain temperature range the dynamic strain ageing phenomena have been reported. In this paper the influence of mobile solute atoms (as obstacles) on the motion of dislocation is analysed. Both processes are assumed to be thermally activated. A new model based on this assumption is proposed. The dislocation velocity and the friction stress (due to solute-dislocation interactions) are calculated. A change in the friction stress caused by solute mobility is discussed.     

Travelling-wave amplified spontaneous emission excited in a prismatic geometry

A new experimental realisation of the travelling-wave amplified spontaneous emission (TWASE) is described utilising a prismatic arrangement to get the pulse front delay in the pump beam. Rhodamine dye solutions were pumped by the amplified 25 ps long 555 nm pulses of a distributed feedback dye laser. The pulse shortening in the TWASE resulted in 12 ps output pulses with 18% energy efficiency. The observed spectrum showed numerous lines, and it contained the amplified Raman line of the pump beam. Several spots were found in the far-field zone of the generated TWASE.     

On X-ray measurements of residual stresses in materials with lattice strain gradient

The non-linear distribution of lattice strain ³¹⁰vs sin² observed on the surface of a polished steel specimen can be interpreted by tri-axial stress state with surface components of stress tensor ₁₁(0)= ₂₂(0) and gradientsg ₁₁= ₁₁/T, g ₃₃= ₃₃/T. The distribution of experimental values is duscussed from the viewpoint of various ways of calculating ₁₁.The authors would like to thank Dr. J. Musil, D. Sc. of the Institute of Physics of Czechoslovak Academy of Sciences for kindly providing the samples which made possible this study.     

Azimuthal anisotropy and correlations at large transverse momenta in p + p and Au + Au collisions at square root sNN=200 GeV

Results on high transverse momentum charged particle emission with respect to the reaction plane are presented for Au + Au collisions at square root s(NN)=200 GeV. Two- and four-particle correlations results are presented as well as a comparison of azimuthal correlations in Au + Au collisions to those in p + p at the same energy. The elliptic anisotropy v(2) is found to reach its maximum at p(t) approximately 3 GeV/c, then decrease slowly and remain significant up to p(t) approximately 7-10 GeV/c. Stronger suppression is found in the back-to-back high-p(t) particle correlations for particles emitted out of plane compared to those emitted in plane. The centrality dependence of v(2) at intermediate p(t) is compared to simple models based on jet quenching.     

"Learn on the fly": a hybrid classical and quantum-mechanical molecular dynamics simulation

We describe and test a novel molecular dynamics method which combines quantum-mechanical embedding and classical force model optimization into a unified scheme free of the boundary region, and the transferability problems which these techniques, taken separately, involve. The scheme is based on the idea of augmenting a unique, simple parametrized force model by incorporating in it, at run time, the quantum-mechanical information necessary to ensure accurate trajectories. The scheme is tested on a number of silicon systems composed of up to approximately 200 000 atoms.