Ground state of a spin-phonon system. I. Variational estimates

A study is made of the ground-state energy of a spin-one-half particle in a fieldB and interacting with a phonon bath. The infrared-sensitive case of acoustic phonons with point coupling in three dimensions is characterized by two parameters, a coupling constant andB. Units are used where the high-momentum phonon cutoff is unity. There is a curve (B) separating a symmetry-breaking region with a long-range phonon field from a normal region. Two simple, well-known, approximations are compared. The source theory yields discontinuities in the first derivatives of the energy with respect toB and whenB>e ^–1 and an infinite-order transition whenB<e ^–1, but is trivial in the large- region. The classical theory yields discontinuities in the second derivatives but is trivial in the small- region. An improved variationally fixed ground-state wave function is analyzed. It gives a new (B) curve with an infinite-order transition with continuous energy derivatives whenB<e/(e ²–1/4) and with discontinuous derivatives whenB is larger than this value. It is nontrivial in the entire (B) plane. The crossover to classical behavior occurs near =1/2 forB1. But the wave function does not describe quantum fluctuations in the large- phase. A second way of combining source and classical effects is described. It yields a second-order transition (near =1/2 forB1) everywhere. These theories are special cases of a symmetry-breaking transformation together with a one-mode treatment of quantum fluctuations. The transition is viewed in terms of a single mode with a variable length, coupled dynamically to the spin.     

Semiconducting organic polymer from polyacrylamide–Cu++ chelate and iodine

Semiconducting organic polymer was obtained by the modification of polyacrylamide (PAAm)–Cu⁺⁺ chelate with iodine in acetone. Favorable conditions for preparing the chelate effective for the conduction were investigated. Surface resistivities were affected by the amounts of cupric salts and iodine, satisfactory results being given by about 25 wt % of the salts based on PAAm and more than 1 wt % of iodine on the chelate. The conductivity was also varied with the degree of neutralization of the chelate in solution, and optimal values were obtained by addition of about an equimolar amount of potassium hydroxide to cupric salts. Effective structures of the polymer chelate in solution were assumed on the basis of the visible and the NMR spectra and potentiometric titration.     

Review of Directly Producing Light olefins via CO Hydrogenation

Directly making light olefins via CO hydrogenation is a promising process to obtain a nonpetroleum based supply of alkenes.Limited by the ASF distribution function of Fischer-Tropsch synthesis,the yield of light olefins (C2-C4) can not reach the desired levels,which is a great challenge to overcome.Beginning thermodynamic analysis,the ASF distribution function,the reaction performance of CO hydrogenation and slurry reactor studies.The problems currently faced by this research area are presented at the end of the article.     

Properties and Photoelectrocatalytic Behaviour of Sol-Gel Derived TiO2 Thin Films

Titanium dioxide (TiO₂) thin films have been prepared on indium doped tin oxide (ITO) glass by sol-gel dip-coating method. Properties of the films were determined as a function of heat-treatment by X-ray diffraction, scanning electron microscopy and photoelectrochemical tests. The films heat-treated at higher temperatures show better crystallinity and photoresponse. The microscopic structure on the film after heat-treatment is attributed to the incorporation of organic polymer into the precursor solution. The performance of the electrodes treated at different temperature on photoelectrocatalytic degradation of methyl orange was investigated. The effect of applied potential and the ability of the electrode to be repeatedly used in photoelectrocatalytic degradation were also evaluated.     

Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.     

Co-immobilization of polymeric luminol,iron(II) tris(5-aminophenanthroline) and glucose oxidase at an electrode surface,and its application as a glucose optrode

The anodic polymerization of 3-aminophthalhydrazide (luminol) and iron(II) tris 5-aminophenanthroline (Fe(phen-NH2)3(2+)) has been reported in this paper. A bilayer electrode was developed based on these polymers and the ITO conductive glass (denoted ITO[Fe(phen-NH2)3(2+)]luminol electrode). This electrode emitted light (lambdaem: 430 nm) as it was brought into contact with H2O2. At pH 10, the resulting electrochemiluminescence (ECL) showed a linear relationship with the concentration of H2O2 in the range of 10 microM(-1) mM. This bilayer electrode also showed an application potential for the detection of glucose after being further modified with glucose oxidase (denoted ITO[Fe(phen-NH2)3(2+)]luminol]GOx electrode). Although the resulting ECL decayed more rapidly in concentrated glucose solutions (e.g., I M) because of the consumption of luminol during use, the decay became less severe in diluted glucose solutions (e.g., 10 mM). According to the flow injection analysis, a linear relationship existed between the ECL and the concentration of glucose from 10(-5)-10(-3) M at pH 9. The detection limit could reach a level of 5 x 10(-5) M at this pH.     

Structural mining: self-consistent design on flexible protein-peptide docking and transferable binding affinity potential

A flexible protein-peptide docking method has been designed to consider not only ligand flexibility but also the flexibility of the protein. The method is based on a Monte Carlo annealing process. Simulations with a distance root-mean-square (dRMS) virtual energy function revealed that the flexibility of protein side chains was as important as ligand flexibility for successful protein-peptide docking. On the basis of mean field theory, a transferable potential was designed to evaluate distance-dependent protein-ligand interactions and atomic solvation energies. The potential parameters were developed using a self-consistent process based on only 10 known complex structures. The effectiveness of each intermediate potential was judged on the basis of a Z score, approximating the gap between the energy of the native complex and the average energy of a decoy set. The Z score was determined using experimentally determined native structures and decoys generated by docking with the intermediate potentials. Using 6600 generated decoys and the Z score optimization criterion proposed in this work, the developed potential yielded an acceptable correlation of R(2) = 0.77, with binding free energies determined for known MHC I complexes (Class I Major Histocompatibility protein HLA-A(*)0201) which were not present in the training set. Test docking on 25 complexes further revealed a significant correlation between energy and dRMS, important for identifying native-like conformations. The near-native structures always belonged to one of the conformational classes with lower predicted binding energy. The lowest energy docked conformations are generally associated with near-native conformations, less than 3.0 Angstrom dRMS (and in many cases less than 1.0 Angstrom) from the experimentally determined structures.     

The separation of palladium and platinum by ion flotation

Differences in the ion flotation properties of palladium(II) and platinum(IV) chloro complexes in aqueous solutions are used to achieve separations of these metals. The anionic chloro complex PtCl^2-₆ is floated selectively with cationic surfactants of the type, RNR'₃Br, from solutions of PdCl^2-₄ and various concentrations of hydrochloric acid. The palladium(II) does not float from solutions of ? 3.0 M HCl and the platinum(IV) floated from these solutions can be recovered free of palladium. However, the separation is incomplete as much of the platinum(IV) is also unfloated from these solutions. Quantitative separations are obtained by conversion of the palladium(II) to the cationic ammine, Pd(NH₃)₄²⁺ with aqueous ammonia prior to flotation. The anionic chloro complex of platinum(IV) is unaffected by the presence of ammonia and is floated quantitatively with the surfactant n-hexadecyltri-n-propylammonium bromide from 0.01 M ammonia solutions.     

Surfactant displacement of human serum albumin adsorbed on loosely packed self-assembled monolayers: cetyltrimethylammonium bromide versus sodium dodecyl sulfate

The surfactants sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) displace human serum albumin (HSA) from loosely packed self-assembled monolayers (SAM) of hydrophobic alkyl chains by different means. Removal of HSA is of interest because previous work has suggested that the adsorption of HSA to such loosely packed SAMs may be sufficiently tenacious to offer opportunities for surface passivation. While HSA remains on the surface after exposure to SDS and rinsing, no protein remains after exposure to CTAB and rinsing. X-ray reflectivity and X-ray photoelectron spectroscopy measurements indicate that CTAB molecules remain interdigitated in the loosely packed SAM after rinsing, suggesting that CTAB is more effective in removing the HSA because it interacts more strongly with the SAM.     

Probing metabolic alterations in breast cancer in response to molecular inhibitors with Raman spectroscopy and validated with mass spectrometry

Rapid and accurate response to targeted therapies is critical to differentiate tumors that are resistant to treatment early in the regimen. In this work, we demonstrate a rapid, noninvasive, and label-free approach to evaluate treatment response to molecular inhibitors in breast cancer (BC) cells with Raman spectroscopy (RS). Metabolic reprogramming in BC was probed with RS and multivariate analysis was applied to classify the cells into responsive or nonresponsive groups as a function of drug dosage, drug type, and cell type. Metabolites identified with RS were then validated with mass spectrometry (MS). We treated triple-negative BC cells with Trametinib, an inhibitor of the extracellular-signal-regulated kinase (ERK) pathway. Changes measured with both RS and MS corresponding to membrane phospholipids, amino acids, lipids and fatty acids indicated that these BC cells were responsive to treatment. Comparatively, minimal metabolic changes were observed post-treatment with Alpelisib, an inhibitor of the mammalian target of rapamycin (mTOR) pathway, indicating treatment resistance. These findings were corroborated with cell viability assay and immunoblotting. We also showed estrogen receptor-positive MCF-7 cells were nonresponsive to Trametinib with minimal metabolic and viability changes. Our findings support that oncometabolites identified with RS will ultimately enable rapid drug screening in patients ensuring patients receive the most effective treatment at the earliest time point.

Rapid and accurate response to targeted therapies is critical to differentiate tumors that are resistant to treatment early in the regimen.