Preparation of a reference mussel tissue material for polycyclic aromatic hydrocarbons and trace metals determination

Due to high cost of certified reference materials (CRMs), reference materials (RMs) are preferred to check the method performance in environmental analysis. In this work, a laboratory reference material (LRM) was prepared and characterised to carry out the quality control in monitoring analysis of eight polycyclic aromatic hydrocarbons (PAHs) and nine trace metals in mussel tissue. Mussels were collected in a naturally polluted area. Before the reference material was bottled, the mussel tissue was stabilised by freeze-drying, ground and sieved. For the material characterisation, several statistical tests were applied to check the homogeneity of the analytes in the tissue, and a stability test was performed to study the effect of the storage temperature in the analyte concentration. Other characteristics such as specific density, moisture and lipid contents as well as particle size distribution of the material were determined. Although the LRM had a homogeneous distribution for all PAHs and almost all metals, the stability study showed different results at both storage temperatures studied. For both PAHs and trace metals, the material was suitable to assure the quality control of the analysis.     

Thermogravimetric analysis of polyester/cotton blends treated with Thpc-urea-poly(vinyl bromide)

Polyester/cotton fabric swith blend ratios of 0/100, 11/89, 20/80, 30/70, 50/50, and 65/35 were investigated via thermogravimetric analysis in both nitrogen and air atmospheres. The samples were heated from ambient to 750°C at a heating rate of 5°C min^?1. The same fabrics were analyzed after treatment with tetrakis (hydroxymethyl) phosphonium chloride-urea-poly(vinyl bromide) (Thpc-urea-PVBr) flame retardant.Weight losses observed during pyrolysis were assigned to the cotton and polyester portions of the blends. Both cotton and polyester thermally decompose to yield gases and solid char byproducts. In nitrogen the 100% cotton fabric undergoes one major weight loss between 270 and 370°C, with the maximum rate of weight loss, 0.15 mg/min-mg occurring at 346°C. Thermal decomposition of the 100% polyester occurs over a range of 335–470°C, with the peak rate of weight loss, 0.11 mg/min-mg, measured at 416°C. In an air atmosphere, both volatile gases and solid char by- products of pyrolysis undergo combustion. The combustion reactions are associated with measured weight losses. The maximum rate of weight loss for the cotton portion increases to 0.25 mg/min-mg and occurs at 317°C. The maximum rate of polyester decomposition remains the same in both air and nitrogen, but the temperature decreases to 405°C.     

MultiSimplex optimisation of the solid-phase microextraction-gas chromatographic-mass spectrometric determination of polycyclic aromatic hydrocarbons,polychlorinated biphenyls and phthalates from water samples

Solid-phase microextraction coupled to GC-MS was optimised for the determination of polycyclic aromatic hydrocarbons (PAHs), phthalate esters and polychlorinated biphenyls (PCBs) in water samples. A 30-microm polydimethylsiloxane fiber was immersed in a 30-ml water sample that contained the analytes of interest (PAHs, PCBs and phthalate esters) and the variables studied were extraction time (15-60 min), extraction temperature (30-90 degrees C), desorption time (1-5 min), desorption temperature (220-270 degrees C) and the addition of sodium chloride (0-9 g). The MultiSimplex programme based on the simplex algorithm was used to establish the optimal conditions. MultiSimplex allowed the simultaneous study of the variables mentioned above and considered the answers of all types of compounds studied in this work. Thus, the optimal conditions obtained allowed the simultaneous determination of PAHs, phthalate esters and PCBs. Furthermore, the accuracy and repeatability of the developed method were calculated from water samples spiked at known concentrations of the analytes. Finally, the optimised method was used to analyse water samples from different sampling points of the Urdaibai and Nerbioi-Ibaizabal estuaries (Biscay, Spain).     

Synthesis and mass spectra of some 1-aroylamino-5-arylaminomethyl-1,2,3-triazoles

The title compounds 2 are prepared from the reaction of 1-(N, N-diaroyl)amino-5-bromomethyl-1,2,3-triazoles with aromatic amines. The fragmentation pattern upon electron impact at 70 eV of compounds 2 is studied. The molecular ion peak is present in all the spectra examined. Besides the [M-28]⁺⁺, there is also a more abundant [M-29]⁺ peak, corresponding to a N₂H loss of the molecular ion. The ion Ar²NH = CH₂ is the base or the most prominent peak.     

Improvement of the chromatographic separation of several 1,4-dihydropyridines calcium channel antagonist drugs by experimental design

A high-performance liquid chromatographic method with diode array detection has been developed and optimized for the separation of five calcium channel blockers belonging to the 1,4-dihydropyridine subgroup (nifedipine and related drugs). The possibility of the simultaneous drug analysis allows a decrease of time during the assay as well as a saving of reagents and solvents. In this work, the effect of four experimental parameters (organic modifier percentage, pH value, concentration of the buffer in the mobile phase, and column temperature) on the chromatographic resolution are investigated by experimental design in order to optimize the chromatographic separation of five 1,4-dihydropyridines (amlodipine, nitrendipine, felodipine, lacidipine, and lercanidipine). Fractional factorial design, central composite design, and finally the Multisimplex program are used to establish the optimal conditions in terms of resolution and minimum analysis time. Optimal separation of the five compounds under study is achieved in less than 12 min using a Sulpecosil LC-ABZ+Plus C18 column, a composition of mobile phase of acetonitrile-10mM acetic acid acetate buffer pH 5 (72:28, v/v) at a flow rate of 1 mL/min, a column temperature of 30 degrees C +/- 0.1 degrees C, and a detection wavelength of 238 nm.     

Synthesis and spectroscopic characterization of 1-[1,2,3-triazol-1-yl]-4-aroylazetidin-2-ones

1-(N-Phenacylidene)amino-1,2,3-triazoles 3 react with propionylchloride and phenoxyacetylchloride in the presence of triethylamine to give trans- ( 5 ) and cis- ( 6 ) 1-(1,2,3-triazol-1-yl)-4-aroylaztidin-2-ones in a 1:1 ratio, on the contrary to the 1-(N-arylidene)amino-1,2,3-triazoles, which do not give any reaction product with the same acid chlorides. The spectroscopic characteristics of these new N-triazolyl-β-lactams are also discussed.     

Asymmetric synthesis of beta-amino esters by aza-Michael reaction of alpha,beta-unsaturated amides using (S,S)-(+)-pseudoephedrine as chiral auxiliary

Chiral nonracemic beta-amino esters were prepared in good yields and enantioselectivities using the diastereoselective conjugate addition of nitrogen nucleophiles to alpha,beta-unsaturated amides derived from (S,S)-(+)-pseudoephedrine as the key step. In this way, several beta-amino amide adducts were prepared using different conjugate acceptors and two different lithium benzylamides as nucleophiles. These adducts were easily converted in only one step, into the final, highly enantioenriched beta-amino esters     

Uncertainty Budget for k0-NAA

The concepts of the Guide to the expression of Uncertainties in Measurements for chemical measurements (GUM) and the recommendations of the Eurachem document "Quantifying Uncertainty in Analytical Methods" are applied to set up the uncertainty budget for k ₀-NAA. The "universally applicable spreadsheet technique", described by Kragten, is applied to the k ₀-NAA basic equations for the computation of uncertainties. The variance components — individual standard uncertainties — highlight the contribution and the importance of the different parameters to be taken into account.     

Dipolar relaxations in the glass transition region and in the liquid crystalline phase of two side-chain liquid crystalline polysiloxanes

The molecular relaxation mechanisms in the glass transition region and in the liquid crystalline phase exhibited by two side-chain liquid crystalline polysiloxanes have been studied by Thermally Stimulated Discharge Currents. These results were compared with those previously obtained by dielectric relaxation spectroscopy. It was observed that two relaxation mechanisms were present in the liquid crystalline phase, and we suggest that these might correspond to the motions of the mesogenic moieties in the liquid crystalline phase. © 1996 John Wiley & Sons, Inc.     

On-Line Multicomponent Determination of the Flux of Mixtures of Phenols Through a Liquid Membrane in Real Time

 The analysis of mixtures of four phenolic compounds in an on-line system using UV-visible measurements with a fibre optic probe is discussed in this work. The aim of this system is to provide accurate real time concentration profiles in order to monitor the transport of phenols across a solid supported liquid membrane in both the feed and stripping phases. Different calibration models are taking into account the pH of the solution, using experimental designs and the first derivative in combination with different multivariate approaches like multiple linear regression (MLR), inverted least squares (ILS) and partial least squares regression (PLS). The comparison of all these combinations is carried out by means of the predictive residual error sum of squares (PRESS) evaluated from an independent set of spectra. From this comparison it is concluded that a PLS model using first derivative spectra offers the most accurate and robust prediction in the permeation experiments. Additionally, the stability of the model and the figures of merit obtained are also discussed. Received July 22, 1999. Revision October 23, 2000.