A simple two steps ytterbium triflate‐catalysed preparation of 2,2‐dimethyl‐2h‐chromenes from salicylaldehydes and 2‐methylpropene

The preparation of various 2,2‐dimethyl‐2H‐chromenes was achieved in two steps via an ytterbium triflate‐catalysed reaction between salicylaldehydes, trimethylorthoformate and 2‐methylpropene. From salicylaldehyde, two reaction products were characterised: 4‐methoxy‐2,2‐dimethylchroman and 2‐(1,3‐dimethoxy‐3‐methylbutyl)phenol. The former compound probably results from a Lewis acid‐catalysed [2+4] cycloaddition between the intermediate quinonemethide and 2‐methylpropene whereas the latter may occur via a reaction related to a carbonyl‐ene reaction between the quinonemethide and 2‐methylpropene. Both compounds were subjected to a catalytic acidic treatment leading to 2,2‐dimethyl‐2H‐chromene. Starting from various salicylaldehydes, the scope of this method was investigated.     

Phenanthrene‐Fused‐Quinoxaline as a Key Building Block for Highly Efficient and Stable Sensitizers in Copper‐Electrolyte‐Based Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) based on Cu^II/I bipyridyl or phenanthroline complexes as redox shuttles have achieved very high open‐circuit voltages (V_OC, more than 1 V). However, their short‐circuit photocurrent density (J_SC) has remained modest. Increasing the J_SC is expected to extend the spectral response of sensitizers to the red or NIR region while maintaining efficient electron injection in the mesoscopic TiO₂ film and fast regeneration by the Cu^I complex. Herein, we report two new D‐A‐π‐A‐featured sensitizers termed HY63 and HY64 , which employ benzothiadiazole (BT) or phenanthrene‐fused‐quinoxaline (PFQ), respectively, as the auxiliary electron‐withdrawing acceptor moiety. Despite their very similar energy levels and absorption onsets, HY64 ‐based DSSCs outperform their HY63 counterparts, achieving a power conversion efficiency (PCE) of 12.5 %. PFQ is superior to BT in reducing charge recombination resulting in the near‐quantitative collection of photogenerated charge carriers.     

Capturing the Monomeric (L)CuH in NHC‐Capped Cyclodextrin: Cavity‐Controlled Chemoselective Hydrosilylation of α,β‐Unsaturated Ketones

The encapsulation of copper inside a cyclodextrin capped with an N‐heterocyclic carbene (ICyD) allowed both to catch the elusive monomeric (L)CuH and a cavity‐controlled chemoselective copper‐catalyzed hydrosilylation of α,β‐unsaturated ketones. Remarkably, (α‐ICyD)CuCl promoted the 1,2‐addition exclusively, while (β‐ICyD)CuCl produced the fully reduced product. The chemoselectivity is controlled by the size of the cavity and weak interactions between the substrate and internal C?H bonds of the cyclodextrin.     

Stoichiometric inhibition of amyloid beta-protein aggregation with peptides containing alternating alpha,alpha-disubstituted amino acids

We have prepared two peptides based on the hydrophobic core (Lys-Leu-Val-Phe-Phe) of amyloid beta-protein (Abeta) that contain alpha,alpha-disubstituted amino acids at alternating positions, but differ in the positioning of the oligolysine chain (AMY-1, C-terminus; AMY-2, N-terminus). We have studied the effects of AMY-1 and AMY-2 on the aggregation of Abeta and find that, at stoichiometric concentrations, both peptides completely stop Abeta fibril growth. Equimolar mixtures of AMY-1 and Abeta form only globular aggregates as imaged by scanning force microscopy and transmission electron microscopy. These samples show no signs of protofibrillar or fibrillar material even after prolonged periods of time (4.5 months). Also, 10 mol % of AMY-1 prevents Abeta self-assembly for long periods of time; aged samples (4.5 months) show only a few protofibrillar or fibrillar aggregates. Circular dichroism spectroscopy of equimolar mixtures of AMY-1 and Abeta show that the secondary structure of the mixture changes over time and progresses to a predominantly beta-sheet structure, which is consistent with the design of these inhibitors preferring a sheet-like conformation. Changing the position of the charged tail on the peptide, AMY-2 interacts with Abeta differently in that equimolar mixtures form large ( approximately 1 mum) globular aggregates which do not progress to fibrils, but precipitate out of solution. The differences in the aggregation mediated by the two peptides is discussed in terms of a model where the inhibitors act as cosurfactants that interfere with the native ability of Abeta to self-assemble by disrupting hydrophobic interactions either at the C-terminus or N-terminus of Abeta.     

Highly efficient metal‐free organic catalysts to design new Environmentally‐friendly starch‐based blends

A one‐step process is reported to directly synthesize blends of poly(trimethylene carbonate) (PTMC) with a modified granular starch. Trimethylene Carbonate (TMC) ring‐opening polymerization is performed in the presence of native starch particles in bulk conditions at 150 °C and the efficiency of metal‐free organic catalysts (TBD and phosphazene superbases P1‐t‐Oct, P2‐t‐bu, and P4‐t‐bu) are investigated to replace the organo‐metallic stannous octanoate initiator. TMC monomer is successively converted into PTMC and the robustness of organic catalysts is highlighted with significant activities at very low concentrations (<100 ppm), where stannous octanoate is inefficient. Reactivity of starch toward TMC ROP is deeply investigated by NMR techniques and a starch‐graft‐PTMC is indirectly evidenced. Starch substitution degree reaches 0.9% indicating that PTMC grafting only occurs at the surface of swollen granular starch. PTMC graft length from the starch surface remained low in the range 2–12 and model ROP reactions highlight the role of TMC hydrolysis on PTMC graft length. Despite low PTMC grafts, a fine dispersion of intact starch particles into the PTMC matrix is evidenced. Consequently, metal‐free organic catalysts at low concentrations are promising candidates for synthesizing blends of PTMC with high loadings of surface‐modified starch (32% by weight) in 2 min within a one‐step process. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 493–503     

A Bioinspired Molybdenum Complex as a Catalyst for the Photo‐ and Electroreduction of Protons

A molybdenum–dithiolene–oxo complex was prepared as a model of some active sites of Mo/W‐dependent enzymes. The ligand, a quinoxaline–pyran‐fused dithiolene, mimics molybdopterin present in these active sites. For the first time, this type of complex was shown to be active as a catalyst for the photoreduction of protons with excellent turnover numbers (500) and good stability in aqueous/organic media and for the electroreduction of protons in acetonitrile with remarkable rate constants (1030 s^?1 at ?1.3 V versus Ag/AgCl). DFT calculations provided insight into the catalytic cycle of the reaction, suggesting that the oxo ligand plays a key role in proton exchange. These results provide a basis to optimize this new class of H₂‐evolving catalysts.     

The preferred mode of cycloreversion of some 1,3,4-substituted azetidin-2-ones upon electron impact

The mass spectra of some 1,3,4-substituted azetidin-2-ones are measured. Fragmentation pathways are confirmed by use of both high-resolution and mass-analysed ion kinetic energy. They are consistent with the possible [2 + 2]- cycloadditions through which the azetidin-2-ones may be synthesized. More attention has to be paid to further fragmentations of the main fragments in assessing the preferred fragmentation mode. Influence of side-chain substituents is discussed.     

A physico-chemical investigation of poly(ethylene oxide)-block-poly(L-lysine) copolymer adsorption onto silica nanoparticles

The adsorption behavior of poly(ethylene oxide)-b-poly(L-lysine) (PEO(113)-b-PLL(10)) copolymer onto silica nanoparticles was investigated in phosphate buffer at pH 7.4 by means of dynamic light scattering, zeta potential, adsorption isotherms and microcalorimetry measurements. Both blocks have an affinity for the silica surface through hydrogen bonding (PEO and PLL) or electrostatic interactions (PLL). Competitive adsorption experiments from a mixture of PEO and PLL homopolymers evidenced greater interactions of PLL with silica while displacement experiments even revealed that free PLL chains could desorb PEO chains from the particle surface. This allowed us to better understand the adsorption mechanism of PEO-b-PLL copolymer at the silica surface. At low surface coverage, both blocks adsorbed in flat conformation leading to the flocculation of the particles as neither steric nor electrostatic forces could take place at the silica surface. The addition of a large excess of copolymer favoured the dispersion of flocs according to a presumed mechanism where PLL blocks of incoming copolymer chains preferentially adsorbed to the surface by displacing already adsorbed PEO blocks. The gradual addition of silica particles to an excess of PEO-b-PLL copolymer solution was the preferred method for particle coating as it favoured equilibrium conditions where the copolymer formed an anchor-buoy (PLL-PEO) structure with stabilizing properties at the silica-water interface.     

Synthesis of vinylindoles and vinylpyrroles by the Peterson olefination or by use of the Nysted reagent

Vinylindoles and vinylpyrroles were prepared from their corresponding aldehydes or ketones using the Peterson olefination, or by use of the Nysted reagent, a commercially available gem‐dimetallic compound. The two methods provide efficient and convenient access to these useful heterocyclic 1,3‐diene systems. J. Heterocyclic Chem., (2011).     

alpha-glucosidase inhibitors from Garcinia brevipedicellata (Clusiaceae)

In our continuous search for alpha-glucosidase inhibitors from plants, four new depsidones named brevipsidones A-D (1-4) were isolated from stem bark of Garcinia brevipedicellata together with known damnacanthal, scopoletin and a mixture of stigmasterol and beta-sitosterol. Structural elucidations were made by spectroscopic analyses including 2D-NMR data.