A physico-chemical investigation of poly(ethylene oxide)-block-poly(L-lysine) copolymer adsorption onto silica nanoparticles

The adsorption behavior of poly(ethylene oxide)-b-poly(L-lysine) (PEO(113)-b-PLL(10)) copolymer onto silica nanoparticles was investigated in phosphate buffer at pH 7.4 by means of dynamic light scattering, zeta potential, adsorption isotherms and microcalorimetry measurements. Both blocks have an affinity for the silica surface through hydrogen bonding (PEO and PLL) or electrostatic interactions (PLL). Competitive adsorption experiments from a mixture of PEO and PLL homopolymers evidenced greater interactions of PLL with silica while displacement experiments even revealed that free PLL chains could desorb PEO chains from the particle surface. This allowed us to better understand the adsorption mechanism of PEO-b-PLL copolymer at the silica surface. At low surface coverage, both blocks adsorbed in flat conformation leading to the flocculation of the particles as neither steric nor electrostatic forces could take place at the silica surface. The addition of a large excess of copolymer favoured the dispersion of flocs according to a presumed mechanism where PLL blocks of incoming copolymer chains preferentially adsorbed to the surface by displacing already adsorbed PEO blocks. The gradual addition of silica particles to an excess of PEO-b-PLL copolymer solution was the preferred method for particle coating as it favoured equilibrium conditions where the copolymer formed an anchor-buoy (PLL-PEO) structure with stabilizing properties at the silica-water interface.     

Brittle Fracture of Aerogels: Stress Corrosion in Alcoholic Environment

The mechanical behaviour of silica aerogels in alcoholic environment has been interpreted in terms of stress corrosion in analogy with silica glass. The chemical susceptibility factor has been determined by the dynamical method and we also measured the Weibull’s modulus which characterizes the strength distribution. These data show a stress corrosion effect which is significant in alcoholic atmosphere. The results could explain a possible fracture of gels during the supercritical drying treatment as already observed.     

Synthesis of thermosensitive guar‐based hydrogels with tunable physico‐chemical properties by click chemistry

Thermosensitive guar‐based hydrogels are obtained in water solutions by copper‐catalyzed 1,3‐dipolar cycloaddition between alkyne‐functionalized guars and α,ω‐diazido‐poly[(ethylene glycol)‐co‐(propylene glycol)]. Characterization by TGA, HR‐MAS ¹H NMR, and rheology have shown that hydrogels with tunable physico‐chemical properties, such as crosslinking density, viscoelasticity, swelling ratio, and so forth, could be obtained by varying the guar molar mass, the degree of alkyne functionality, the guar/crosslinker weight ratio, and the reaction temperature. Based on swelling measurements, it has been shown that the thermal sensitiveness of guar‐based hydrogels is fast, reversible, and intimately related to the weight fraction of the thermosensitive crosslinker in the network. Finally, the monitoring of doxorubicin hydrochloride release has demonstrated the potential of these hydrogels as temperature‐dependent drug release devices. The robust, efficient, and orthogonal approach described herein represents a general approach towards the development of well‐controlled guar‐based hydrogels using α,ω‐diazido crosslinkers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2733–2742, 2010     

Stress-based upper-bound method and convex optimization: case of the Gurson materialMéthode cinématique par les contraintes et optimisation convexe : cas du matériau de Gurson

A nonlinear interior point method associated with the kinematic theorem of limit analysis is proposed. Associating these two tools enables one to determine an upper bound of the limit loading of a Gurson material structure from the knowledge of the sole yield criterion. We present the main features of the interior point algorithm and an original method providing a rigorous kinematic bound from a stress formulation of the problem. This method is tested by solving in plane strain the problem of a Gurson infinite bar compressed between rough rigid plates. To cite this article: F. Pastor et al., C. R. Mecanique 334 (2006).     

A Bioinspired Molybdenum Complex as a Catalyst for the Photo‐ and Electroreduction of Protons

A molybdenum–dithiolene–oxo complex was prepared as a model of some active sites of Mo/W‐dependent enzymes. The ligand, a quinoxaline–pyran‐fused dithiolene, mimics molybdopterin present in these active sites. For the first time, this type of complex was shown to be active as a catalyst for the photoreduction of protons with excellent turnover numbers (500) and good stability in aqueous/organic media and for the electroreduction of protons in acetonitrile with remarkable rate constants (1030 s^?1 at ?1.3 V versus Ag/AgCl). DFT calculations provided insight into the catalytic cycle of the reaction, suggesting that the oxo ligand plays a key role in proton exchange. These results provide a basis to optimize this new class of H₂‐evolving catalysts.     

From Lignin‐derived Aromatic Compounds to Novel Biobased Polymers

Nowadays, the synthesis of (semi)aromatic polymers from lignin derivatives is of major interest, as aromatic compounds are key intermediates in the manufacture of polymers and lignin is the main source of aromatic biobased substrates. Phenols with a variety of chemical structures can be obtained from lignin deconstruction; among them, vanillin and ferulic acid are the main ones. Depending on the phenol substrates, different chemical modifications and polymerization pathways are developed, leading to (semi)aromatic polymers covering a wide range of thermomechanical properties. This review discusses the synthesis and properties of thermosets (vinyl ester resins, cyanate ester, epoxy, and benzoxazine resins) and thermoplastic polymers (polyesters, polyanhydrides, Schiff base polymers, polyacetals, polyoxalates, polycarbonates, acrylate polymers) prepared from vanillin, ferulic acid, guaiacol, syringaldehyde, or 4‐hydroxybenzoic acid.

     

Convergence analysis for Lasserre’s measure-based hierarchy of upper bounds for polynomial optimization

We consider the problem of minimizing a continuous function f over a compact set \({\mathbf {K}}\). We analyze a hierarchy of upper bounds proposed by Lasserre (SIAM J Optim 21(3):864–885, 2011), obtained by searching for an optimal probability density function h on \({\mathbf {K}}\) which is a sum of squares of polynomials, so that the expectation \(\int _{{\mathbf {K}}} f(x)h(x)dx\) is minimized. We show that the rate of convergence is no worse than \(O(1/\sqrt{r})\), where 2r is the degree bound on the density function. This analysis applies to the case when f is Lipschitz continuous and \({\mathbf {K}}\) is a full-dimensional compact set satisfying some boundary condition (which is satisfied, e.g., for convex bodies). The rth upper bound in the hierarchy may be computed using semidefinite programming if f is a polynomial of degree d, and if all moments of order up to \(2r+d\) of the Lebesgue measure on \({\mathbf {K}}\) are known, which holds, for example, if \({\mathbf {K}}\) is a simplex, hypercube, or a Euclidean ball.     

Determination of Primaquine in Whole Blood and Finger-Pricked Capillary Blood Dried on Filter Paper Using HPLC and LCMS/MS

Primaquine (PQ) is the only 8-aminoquinoline antimalarial drug in clinical use because of its unique action on hypnozoites and gametocytes of Plasmodium species. We report here simple, sensitive and specific assay methods for the determination of PQ in human whole blood and dried blood spot (DBS) samples using high-performance liquid chromatography and liquid chromatography-mass spectrometry, respectively. Sample preparation was performed by a single or two-step liquid-liquid extraction with organic solvents. For whole blood analysis, separation was obtained on a reversed-phase C18 column with the mobile phase consisting of 0.25 % diethylamine and acetonitrile (7:3, v:v) running at a flow rate of 1.0 ml min^?1. UV detection was at the wavelength 263 nm. For DBS analysis, separation was obtained on a reversed-phase column with the mobile phase consisting of methanol and 0.1 formic acid (1:3, v:v) running at a flow rate of 0.5 ml min^?1. The selected ions generated by electrospray ionization were detected using mass spectrometer. Good precision and accuracy (both within-day and day-to-day assays) were obtained at the concentration ranges under investigation. Limits of quantification for PQ were accepted as 25 ng ml^?1 using 500 μl whole blood and 5 ng ml^?1 using 80 μl DBS samples. The mean recoveries for PQ and internal standard pyrimethamine (PYR) for both whole blood and DBS were over 70 %. The methods were successfully applied for a clinical pharmacology study of PQ in patients with Plasmodium vivax. Excellent correlation (r ²  = 0.997) was observed between the analysis of PQ in paired whole blood and DBS samples.