Effect of the Media on the Quantum Yield of Singlet Oxygen (O2(1Δg)) Production by 9H‐Fluoren‐9‐one: Solvents and Solvent Mixtures

We have investigated the effect of a series of 18 solvents and mixtures of solvents on the production of singlet molecular oxygen (O₂(¹Δ_g), denoted as ¹O₂) by 9H‐fluoren‐9‐one (FLU). The normalized empirical parameter E derived from E_T(30) has been chosen as a measure of solvent polarity using Reichardt's betaine dyes. Quantum yields of ¹O₂ production (Φ_Δ) decrease with increasing solvent polarity and protic character as a consequence of the decrease of the quantum yield of intersystem crossing (Φ_ISC). Values of Φ_Δ of unity have been found in alkanes. In nonprotic solvents of increasing polarity, Φ_ISC and, therefore, Φ_Δ decrease due to solvent‐induced changes in the energy levels of singlet and triplet excited states of FLU. This compound is a poor ¹O₂ sensitizer in protic solvents, because hydrogen bonding considerably increases the rate of internal conversion from the singlet excited state, thus diminishing Φ_Δ to values much lower than those in nonprotic solvents of similar polarity. In mixtures of cyclohexane and alcohols, preferential solvation of FLU by the protic solvent leads to a fast decrease of Φ_Δ upon addition of increasing amounts of the latter.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

Preparation and Study of Decavanadate-Pillared Hydrotalcite-like Anionic Clays Containing Cobalt and Chromium

Hydrotalcite-like compounds containing Co(II) and Cr(III) in the brucite-like layers have been prepared. The interlayer anion was carbonate or decavanadate. The chemical formulas of the samples are [Co(0.65)Cr(0.35)(OH)(2)] (CO(3))(0.175).1.22H(2)O (sample CoCrC) and [Co(0.61)Cr(0.39)(OH)(2)](V(10)O(28))(0.065).1.35H(2)O (sample CoCrV). The compounds have been characterized by X-ray diffraction, XAS, vis-UV, FT-IR, and Raman spectroscopies, while the surface textures were assessed by nitrogen adsorption. Reducibility has been studied by temperature-programmed reduction. A similar characterization study has been carried out on samples obtained after calcination of the parent samples in air at increasing temperatures. Results indicate an ordered structure, with Co(II) and Cr(III) ions in octahedral holes of the brucite-like layers and, in CoCrV, decavanadate species with its main C(2) axis parallel to the layers. Thermal decomposition at increasing temperatures takes place, for CoCrC, through intermediate formation of Cr(VI) species, which are again reduced to Cr(III) at higher temperatures; simultaneously, Co(II) is oxidized to Co(III) (even at 673 K), thus leading to formation of Co(II)Co(III)Cr(III)O(4). However, decomposition of CoCrV takes place through partial depolymerization of decavanadate species and formation of Co(II)Cr(2)O(4) and Co(II)(2)V(2)O(7), without intermediate formation of Cr(VI) species.     

Influence of organic ligands on the stabilization of palladium nanoparticles

The synthesis of palladium nanoparticles is performed by hydrogenation of a precursor, Pd₂(dba)₃ (1) or [Pd(C₃H₅)Cl]₂ (2) in the presence of either a weakly coordinating ligand (hexadecylamine, HDA) or good ligands (polyphosphines). It is shown in the case of 1 that good ligands lead to stable spherical nanoparticles of small size (near 2 nm) whereas the protective effect of HDA depends on the amount of ligand added as a result of equilibria present at the surface of the particles as monitored by solution NMR spectroscopy. The decomposition of 2 being very fast, the particle growth cannot be controlled except in the case of the use of a large excess of HDA which leads to spongelike particles resulting from the agglomeration of initially obtained nanocrystallites.     

Reactivity of amino acids in nitrosation reactions and its relation to the alkylating potential of their products

Nitrosation reactions of amino acids with an -NH(2) group [namely, six alpha-amino acids (glycine, alanine, alpha-aminobutyric acid, alpha-aminoisobutyric acid, valine, and norvaline); two beta-amino acids (beta-alanine and beta-aminobutyric acid), and one gamma-amino acid (gamma-aminobutyric acid)] were studied. Nitrosation was carried out in aqueous acid media, mimicking the conditions of the stomach lumen. The rate equation was r = k(3)(exp)[amino acid][nitrite](2), with a maximum k(3)(exp) value in the 2.3-2.7 pH range. The existence of an isokinetic relationship supports the argument that all the reactions share a common mechanism. A nitrosation mechanism is proposed, and the following conclusions are drawn: (i) Nitrosation reactions of amino acids with a primary amino group in acid media occur with dinitrogen trioxide as the main nitrosating agent. The finding that the nitrosation rate is proportional to the square of the nitrite concentration suggests that the yield of nitrosation products in the stomach would increase sharply with higher nitrate/nitrite intakes. (ii) Stomach hypochlorhydria could be a potential enhancer of in vivo amino acid nitrosation. (iii) The reactivity (k(3)()(exp)) [alpha-amino acids > beta-amino acids > gamma-amino acids] is the same as that found in a previous work for the alkylating potential of lactones formed from nitrosation products of the same amino acids. This implies that the nitrosation reactions of the most common natural amino acids are the most efficient precursors of the most powerful alkylating agents. (iv) The order of magnitude (10(7)-10(8) M(-1) s(-1)) of the bimolecular rate constants of nitrosation shows that such reactions occur through an encounter process.     

Reactivity of molybdenum and rhenium hydroxo-carbonyl complexes toward organic electrophiles

The hydroxo compounds [Re(OH)(CO)(3)(N-N)] (N-N=bipy, 2 a; Me(2)-bipy, 2 b) were prepared in a biphasic H(2)O/CH(2)Cl(2) medium by reaction of [Re(OTf)(CO)(3)(N-N)] with KOH. In contrast, when anhydrous CH(2)Cl(2) was used, the binuclear hydroxo-bridged compound [[Re(CO)(3)(bipy)](2)(mu-OH)]OTf (3-OTf) was obtained. Compound [Re(OH)(CO)(3)(Me(2)-bipy)] (2 b) reacted with phenyl acetate or vinyl acetate to afford [Re(OAc)(CO)(3)(Me(2)-bipy)] (4) and phenol or acetaldehyde, respectively. The reactions of [Mo(OH)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1), 2 a, and 2 b toward several unsaturated organic electrophiles were studied. The reaction of 1 with (p-tolyl)isocyanate afforded an adduct of N,N'-di(p-tolyl)urea and the carbonato-bridged compound [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(mu-eta(1)(O),eta(1)(O)-CO(3))] (5). In contrast, the reaction of 2 a with phenylisocyanate afforded [Re(OC(O)NHPh)(CO)(3)(bipy)] (6); this results from formal PhNCO insertion into the O-H bond. On the other hand, compounds [Mo[SC(O)NH(p-tolyl)](eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (7), [Re[SC(O)NH(p-tolyl)](CO)(3)(Me(2)-bipy)] (8 a), and [Re[SC(O)NHEt](CO)(3)(Me(2)-bipy)] (8 b) were obtained by reaction of 1 or 2 b with the corresponding alkyl or aryl isothiocyanates. In those cases, RNCS was inserted into the M-O bond. The reactions of 1, 2 a, and 2 b with dimethylacetylenedicarboxylate (DMAD) gave the complexes [Mo[C(OH)-C(CO(2)Me)C(CO(2)Me)-O](eta(3)-C(3)H(4)-Me-2)(CO)(phen)] (9) and [Re[C(OH)C(CO(2)Me)C(CO(2)Me)O](CO)(2)(N-N)] (N-N=bipy, 10 a; Me(2)-bipy, 10 b). The molecules of these compounds contain five-membered metallacycles that are the result of coupling between the hydroxo ligand, DMAD, and one of the CO ligands. The new compounds were characterized by a combination of IR and NMR spectroscopy, and for [[Re(CO)(3)(bipy)(2)(mu-OH)]BF(4) (3-BF(4)), 4, 5, 6, 7, 8 b, 9, and 10 b, also by means of single-crystal X-ray diffraction.     

The role of β-cyclodextrin and hydroxypropyl β-cyclodextrin in the secondary chemical equilibria associated to the separation of β-carbolines by HPLC

The use of cyclodextrins (CDs) in HPLC as mobile phase additives provides a flexible alternative for the separation of chemically related compounds because these separations can be performed on conventional columns and are economically advantageous over the use of chiral stationary phases. The present paper describes the influence of the presence of β-cyclodextrin (β-CD) and 2-hydroxypropyl-β-cyclodextrin (HPβ-CD) on the separation of the β-carboline alkaloids norharmane, harmane and harmine. The nature of the stationary phase (reverse phases C₁ and C₁₈) affects the chromatographic separations and also the stability of the inclusion complexes that are developed. The changes in the proportion of the organic solvents at constant concentration of CDs (3 mM for β-CD and 15 mM for HPβ-CD) modify the retention factors (k′) for all alkaloids studied. The nature of the organic solvent in the mobile phase also changes the chromatographic parameters. The logarithm of the capacity factor (k′) is linearly increased with the proportion of water in the hydro-organic mobile phase (ethanolic or methanolic) but the slopes obtained vary depending on the CD added to the mobile phase. The role of competitive equilibria, i.e., chromatographic distribution and inclusion complexes formation is discussed. This paper was presented at XIIIth International Cyclodextrin Symposium. Torino, Italy, May, 14–17, 2006     

Order-disorder at Fe sites in SrFe2/3B″1/3O3 (B″=Mo, W, Te, U) tetragonal double perovskites

We have prepared SrFe_2/3B″_1/3O₃ (B″=Mo, U, Te, and W) double perovskites in polycrystalline form by ceramic methods. Phases with B″=U, Te and W have been studied by X-ray powder diffraction and the results have been compared with neutron diffraction data available for B″=Mo. At room temperature, the stoichiometric samples crystallize in the tetragonal crystal system (space group I4/m, Z=4). Cell parameters when B″=U, Te and W are a=5.6936(1) Å, c=8.0637(1)Å; a=5.5776(1) Å, c=7.9144(3) Å and a=5.5707(3) Å, c=7.9081(5) Å, respectively.The Mössbauer spectra at room temperature for all compounds show hyperfine parameters belonging to two Fe³⁺ sites located at lattice positions with different degrees of distortion. This is in agreement with diffraction data that indicate that the series of compounds display different degrees of Fe-site disorder, which increases in the following sequence: Mo<U<Te<W.     

A New Ent-Kaurane from the Roots of Lasianthaea aurea

Chemistry of Natural Compounds - A known kaurenoic acid (1), together with a new kaurane derivative named 3α-isobutyryloxykaurenoic acid (2), was isolated from the roots of Lasianthaea aurea,...