Factorial analysis of the trihalomethanes formation in water disinfection using chlorine

The factors that affect trihalomethane (THM) (chloroform, bromodichloromethane, chlorodibromomethane and bromoform) formation from the chlorination of aqueous solutions of hydrophobic fulvic acids (FA) were investigated in a prototype laboratorial simulation using factorial analysis. This strategy involved a fractional factorial design (16 plus 5 center experiments) of five factors (fulvic acids concentration, chlorine dose, temperature, pH and bromide concentration) and a Box Behnken design (12 plus 3 center experiments) for the detailed analysis of three factors (FA concentration, chlorine dose and temperature). The concentration of THM was determined by headspace analysis by GC-ECD. The most significant factors that affect the four THM productions were the following: chloroform-FA concentration and temperature; bromodichloromethane-FA concentration and chlorine dose; chlorodibromomethane-chlorine dose; and, bromoform-chlorine dose and bromide concentration. Moreover, linear models were obtained for the four THM concentrations in the disinfection solution as function of the FA concentration, chlorine dose and temperature, and it was observed that the complexity of the models (number of significant factors and interactions) increased with increasing bromine atoms in the THM. Also, this study shows that reducing the FA concentration the relative amount of bromated THM increases.     

Infrared spectroscopy of racemic and enantiomeric forms of atenolol

The molecular structure of conformational isomorphs given by X-ray diffraction for racemic and enantiomeric atenolol were optimized at the HF/6-31G* level of theory and the infrared spectra of the structure were calculated. These spectra are used to characterize the differences between the various atenolol conformers. The spectra of the (R,S)- and S-atenolol solid forms were recorded and the bands corresponding to the functional groups identified with the aid of the calculated spectra, fitting analysis, temperature effect and H/D isotopic exchange. Particular attention was paid to the stretch vibration modes of the functional groups present in the atenolol.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

Computational Investigation of the Effect of pH on the Color of Firefly Bioluminescence by DFT

In spite of recent advances towards understanding the mechanism of firefly bioluminescence, there is no consensus about which oxyluciferin (OxyLH₂) species are the red and yellow‐green emitters. The crystal structure of Luciola cruciata luciferase (LcLuc) revealed different conformations for the various steps of the bioluminescence reaction, with different degrees of polarity and rigidity of the active‐site microenvironment. In this study, these different conformations of luciferase (Luc) are simulated and their effects on the different chemical equilibria of OxyLH₂ are investigated as a function of pH by means of density functional theory with the PBE0 functional. In particular, the thermodynamic properties and the absorption spectra of each species, as well as their relative stabilities in the ground and excited states, were computed in the different conformations of Luc. From the calculations it is possible to derive the acid dissociation and tautomeric constants, and the corresponding distribution diagrams. It is observed that the anionic keto form of OxyLH₂ is both the red and the yellow‐green emitter. Consequently, the effect of Luc conformations on the structural and electronic properties of the Keto‐(?1) form are studied. Finally, insights into the Luc‐catalyzed light‐emitting reaction are derived from the calculations. The multicolor bioluminescence can be explained by interactions of the emitter with active‐site molecules, the effects of which on light emission are modulated by the internal dielectric constant of the different conformations. These interactions can suffer also from rearrangement due to entry of external solvent and changes in the protonation state of some amino acid residues and adenosine monophosphate (AMP).     

Autoduality for treelike curves with planar singularities

Let C be a treelike curve, that is, a reduced curve whose irreducible components meet transversally at disconnecting points ofC. AssumeC has planar singularities. In this note we prove an Autoduality Theorem for C. More precisely, in [6] a natural Abel map A: C → $\bar J$ to a certain compactification $\bar J$ of the generalized Jacobian of C has been constructed. In this note we prove that the pullback map $A^* :Pic^0 (\bar J) \to Pic^0 (C)$ is an isomorphism.     

The Three‐Component Biginelli Reaction: A Combined Experimental and Theoretical Mechanistic Investigation

Biginelli reactions have been monitored by direct infusion electrospray ionization mass spectrometry (ESI‐MS) and key cationic intermediates involved in this three‐component reaction have been intercepted and further characterized by tandem MS experiments (ESI‐MS/MS). Density functional theory calculations were also used to investigate the feasibility of the major competing mechanisms proposed for the Biginelli reaction. The experimental and theoretical results were found to corroborate the iminium mechanism proposed by Folkers and Johnson, whereas no intermediates directly associated with either the more energy demanding Knoevenagel or enamine mechanisms could be intercepted.     

Preparation of nanocomposites by reversible addition‐fragmentation chain transfer polymerization from the surface of quantum dots in miniemulsion

Herein, we report the synthesis of quantum dots (QDs)/polymer nanocomposites by reversible addition‐fragmentation chain transfer (RAFT) polymerization in miniemulsions using a grafting from approach. First, the surfaces of CdS and CdSe QDs were functionalized using a chain transfer agent, a trisalkylphosphine oxide incorporating 4‐cyano‐4‐(thiobenzoylsulfanyl)pentanoic acid moieties. Using a free radical initiator (AIBN) to activate the RAFT process, a polystyrene (PS) block was grafted from the surface of the QDs. Quantum confinement effects were identified for the nanocomposite obtained, so attesting to the integrity of the QDs after the polymerization. Free PS chains were also present in the final nanocomposite, indicating that the RAFT polymerization from the surface of the QDs was accompanied by conventional free radical polymerization. After isolating the nanocomposite particles, a second poly(n‐butyl acrylate) block was tentatively grown from the initial PS block. The first results indicated a successful polymerization of the second polymer and show the potential of the current strategy to prepare block copolymers from the surface of the RAFT‐modified QDs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5367–5377, 2009     

Second-order conditions on the overflow traffic function from the Erlang-B system: a unified analysis

This paper presents a unified treatment of the mathematical properties of the second-order derivatives of the overflow traffic function from an Erlang loss system, assuming the number of circuits to be a nonnegative real number. It is shown that the overflow traffic function [^(A)]( a,x ) widehat Aleft( {a,x} right) is strictly convex with respect to x (number of circuits) for x ≥ 0, taking the offered traffic, a, as a positive real parameter. It is also shown that [^(A)]( a,x ) widehat Aleft( {a,x} right) is a strictly convex function with respect to a, for all (a, x) ∈ ℝ⁺ × ℝ⁺. Following a similar process, it is shown that [^(A)]( a,x ) widehat Aleft( {a,x} right) is a strict submodular function in this domain and that the improvement function introduced by K. O. Moe [11] is strictly increasing in a. Finally, based on some particular cases and numerous numerical results, there is a conjecture that the function [^(A)]( a,x ) widehat Aleft( {a,x} right) is strictly jointly convex in areas of low blocking where the standard offered traffic is less than −1.