Factorial analysis of the trihalomethanes formation in water disinfection using chlorine

The factors that affect trihalomethane (THM) (chloroform, bromodichloromethane, chlorodibromomethane and bromoform) formation from the chlorination of aqueous solutions of hydrophobic fulvic acids (FA) were investigated in a prototype laboratorial simulation using factorial analysis. This strategy involved a fractional factorial design (16 plus 5 center experiments) of five factors (fulvic acids concentration, chlorine dose, temperature, pH and bromide concentration) and a Box Behnken design (12 plus 3 center experiments) for the detailed analysis of three factors (FA concentration, chlorine dose and temperature). The concentration of THM was determined by headspace analysis by GC-ECD. The most significant factors that affect the four THM productions were the following: chloroform-FA concentration and temperature; bromodichloromethane-FA concentration and chlorine dose; chlorodibromomethane-chlorine dose; and, bromoform-chlorine dose and bromide concentration. Moreover, linear models were obtained for the four THM concentrations in the disinfection solution as function of the FA concentration, chlorine dose and temperature, and it was observed that the complexity of the models (number of significant factors and interactions) increased with increasing bromine atoms in the THM. Also, this study shows that reducing the FA concentration the relative amount of bromated THM increases.     

Infrared spectroscopy of racemic and enantiomeric forms of atenolol

The molecular structure of conformational isomorphs given by X-ray diffraction for racemic and enantiomeric atenolol were optimized at the HF/6-31G* level of theory and the infrared spectra of the structure were calculated. These spectra are used to characterize the differences between the various atenolol conformers. The spectra of the (R,S)- and S-atenolol solid forms were recorded and the bands corresponding to the functional groups identified with the aid of the calculated spectra, fitting analysis, temperature effect and H/D isotopic exchange. Particular attention was paid to the stretch vibration modes of the functional groups present in the atenolol.     

Factorial analysis of a chemiluminescence system for bromate detection in water

A chemiluminescent flow system for bromate detection, based on the reaction of bromate with sulphite in acid medium and using the steroid hydrocortisone as sensitiser, was studied. A factorial analysis strategy for the study of the effect on the system response of the experimental factors, flow rates of two pumps (Q₁ — acid sulphite plus hydrocortisone aqueous solution; Q₂ — carrier, water), sample injection volume (V_L), reactor volume (V_R), sulphite concentration (C_S), hydrocortisone concentration (C_H) and acid concentration (C_A), was used. Screening analysis of the system performance was made using Plackett Burman designs. The system optimisation procedure was achieved by three levels three factors full factorial designs. V_L and C_H are the most significant factors — a quadratic C_H term was also observed to be significant. The optimised system responded linearly (logarithm of the detector signal as function of the logarithm of the bromate concentration) in the concentration range between 3.6×10⁻⁷ and 5.0×10⁻⁴ M with a limit of detection of about 8.0×10⁻⁸ M (about 10 microg/l). An analysis of some interfering ions was made and it was suggested that bromide and chloride begin to quench chemiluminescence when they are in a 10-fold excess relatively to bromate concentration.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

Anaerobic reduction of a sulfonated azo dye, Congo Red, by sulfate-reducing bacteria

The capacity for anaerobic decolorization of a sulfonated azo dye, Congo Red, by a strain of a sulfate-reducing bacterium was evaluated. After optimizing the growth rate of the bacteria on a simple carbon source and terminal electron acceptor pair, lactate and sulfate, respectively, the effect of the dye concentration on their growth rate was analyzed. The decolorization rate was affected by the dye concentration in the growth medium. The azo-bond cleavage mechanism of reductive decolorization with the formation of benzidine was consistent with the results, as this metabolite was identified by high-performance liquid chromatography. Several fractions of the culture medium, including lysed cell extracts, were examined for the capacity to reduce the azo dye. This reduction capacity was found in the culture medium in which the cells had previously grown. The results showed that the mechanism of reductive decolorization of this sulfonated azo dye was extracellular and nonenzymatic, consistent with the production of sulfide anion by the microorganisms while growing on lactate and sulfate. The sulfide anions were the cause of the reduction leading to the disappearance of color in the medium. To increase the rate of decolorization, the presence of ferrous ion was also necessary together with the lactate and sulfate substrates.     

Synthesis and evaluation of benzothiazolyl and benzimidazolyl asparagines as amino acid based selective fluorimetric chemosensors for Cu

A series of emissive N-tert-butyloxycarbonyl benzyl ester asparagines bearing benzothiazole and benzimidazole units at the side chain, functionalised with electron donor or acceptor groups, were evaluated as novel amino acid based fluorimetric chemosensors for transition metal cations, such as Cu²⁺, Zn²⁺, Co²⁺ and Ni²⁺. Selective removal of the protecting groups at the N- and C-terminals was carried out in order to assess the influence of the presence of blocking groups on the overall coordination ability. The results indicate that there is a strong interaction through the donor N, O and S atoms at the side chain of the various asparagines, with high selectivity towards Cu²⁺ in a 1:1 complex stoichiometry. Association constants and detection limits for Cu²⁺ were calculated. The photophysical and metal ion sensing properties of these asparagines suggest that they can be suitable for incorporation into peptidic chemosensor frameworks.     

The isobutylene-isobutane alkylation process in liquid HF revisited

Details on the mechanism of HF catalyzed isobutylene-isobutane alkylation were investigated. On the basis of available experimental data and high-level quantum chemical calculations, a detailed reaction mechanism is proposed taking into account solvation effects of the medium. On the basis of our computational results, we explain why the density of the liquid media and stirring rates are the most important parameters to achieve maximum yield of alkylate, in agreement with experimental findings. The ab initio Car-Parrinello molecular dynamics calculations show that isobutylene is irreversibly protonated in the liquid HF medium at higher densities, leading to the ion pair formation, which is shown to be a minimum on the potential energy surface after optimization using periodic boundary conditions. The HF medium solvates preferentially the fluoride anion, which is found as solvated [FHF](-) or solvated F(-.)(HF)(3). On the other hand, the tert-butyl cation is weakly solvated, where the closest HF molecules appear at a distance of about 2.9 Angstrom with the fluorine termination of an HF chain.     

Theoretical characterization of the chemical bonds of some three-membered ring compounds through QTAIM theory

Structural Chemistry - In this paper, we investigate the nature of the carbonyl and the intraring C–C, C–N, C–O, N–N, O–O and N–O bonds of cyclopropanone and the...