Untersuchungen in der toxikologischen Chemie

Ohne Zusammenfassung     

Determination of non-steroidal anti-inflammatory drugs in sewage sludge by direct hollow fiber supported liquid membrane extraction and liquid chromatography–mass spectrometry

In this study, a three-phase hollow fiber liquid-phase microextraction (HF-LPME) method combined with liquid chromatography–mass spectrometry was developed for direct determination of four non-steroidal anti-inflammatory drugs (ketoprofen, naproxen, diclofenac and ibuprofen) in sewage sludge. The drugs were extracted from non-spiked and spiked slurry samples with different amounts of sludge into an organic phase and then back-extracted into an aqueous phase held in the lumen of the hollow fiber. High enrichment factors ranging from 2761 to 3254 in pure water were achieved. In sludge samples, repeatability and inter-day precision were tested with relative standard deviation values between 10–18% and 7–15%, respectively. Average concentrations of 29 ± 9, 138 ± 2, 39 ± 5 and 122 ± 7 ng/g were determined in dried sludge from Källby sewage treatment plant (Sweden) for ketoprofen, naproxen, diclofenac and ibuprofen, respectively.     

Operating characteristics of near-infrared self-assembled polymer microlasers

We report near-infrared laser emission from self-assembled luminescent polymer microcavities. The microrings are formed around silica optical fibers of varying diameters (80, 125, and 200 microm) and are shown to exhibit photopumped lasing at approximately 820 nm. The microrings with 200 mum inner diameter have an overall quality factor of approximately 2 x 10(3), which is limited by surface roughness and scattering. We illustrate how the laser threshold varies inversely with both the quality factor and the diameter of the microrings. The free spectral range and the intensity variation of the laser output are also presented.     

Hollow fiber liquid phase microextraction as a preconcentration and clean-up step after pressurized hot water extraction for the determination of non-steroidal anti-inflammatory drugs in sewage sludge

A method for the quantitative determination of non-steroidal anti-inflammatory drugs (NSAIDs) in sewage sludge was developed and validated. The target compounds were extracted using pressurized hot water extraction (PHWE) and then purified and preconcentrated by three-phase hollow fiber liquid phase microextraction (HF-LPME) followed by LC–ESI-MS analysis. The PHWE was optimized with regard to the pH of solvent as well as other operational parameters. The optimum conditions were 0.01 M NaOH as the extraction solvent, temperature of 120 °C, pressure of 100 bar, static time 5 min, 5 cycles, flush volume 90% and purge time 60 s. Spike recoveries for sludge samples spiked at 200 ng g⁻¹ were in the range of 101–109% but for the native drugs in non-spiked sludge samples, recoveries were 38.9%, 59.8%, 90.3% and 47.8% for ketoprofen, naproxen, diclofenac and ibuprofen, respectively. Donor phase pH, ionic strength and extraction time were optimized for HF-LPME after PHWE. The optimum conditions were 2 h extraction at pH 1.5 without salt addition. Enrichment factors in the range of 947–1213 times were achieved (extraction recoveries were 23.6–30.3%) for HF-LPME after PHWE. The matrix effect on the ionization of drugs in LC–ESI-MS was also investigated. The results show that there is a smaller matrix effect (−8.9% to +14.6%) in comparison with other published values obtained using solid phase extraction (SPE) for clean-up after pressurized liquid extraction (PLE). Method detection limits (MDLs) and method quantification limits (MQLs) for different drugs were in the range of 0.4–3.7 ng g⁻¹ and 1.5–12.2 ng g⁻¹ in dried sludge samples, respectively. The characteristics of the proposed method were compared with those of other published works. The considerably lower ion suppression/enhancement and minimum use of organic solvents (a few microliters of di-n-hexyl ether) in the sample preparation step are two highlighted advantages of the proposed method in comparison with previously published works. The method was applied to determine NSAIDs in sewage sludge from Källby wastewater treatment plant (Lund, Sweden) in April, June, August and October 2010. The highest concentration level was recorded for ibuprofen in the April sewage sludge sample (588 ng g⁻¹) and all of the selected NSAIDs were detected in all the samples analyzed.     

Cycloisomerization of γ- and δ-acetylenic acids catalyzed by gold(I) chloride

We have developed a gold(I)-catalyzed intramolecular cyclization of γ- and δ-alkyne acids in mild conditions yielding various alkylidene lactones. Whereas a slight electronic effect of the R group was observed on the regioselectivity, bulky substituents on the R group bearing the alkyne strongly modify the reactivity. The cycloisomerization of o-alkynylbenzoic methyl esters was achieved rather with AuCl₃ as catalyst owing the presence of water affording exclusively the isocoumarins.     

Evaluation by chemical parameters of the pollution state of the agricultural-industrial settlement of the Fucino Plain

In the present work are reported the results of a monitoring on a vast scale, carried out through evaluation of opportune chemical parameters, of the pollution state of the agricultural-industrial settlement of the Fucino Plain. The parameters took into consideration have been the presence of wide consumption pesticides and of ionic species as Cl-, NO2-, NO3-, NH4+, the quantification of the dissolved oxygen, of the temperature, of the conductivity, of pH and eH. Collected data are used for chemometric elaboration. The water systems examined, by means of drawing campaigns carried out at regular intervals in winter, spring, summer, and autumnal seasons, are represented by superficial waters constituting a network of irrigation canals fed by stratum and meteoric waters. In this work are reported the results relative to the drawing campaigns.     

Public perception of nanotechnology

While several studies on the public opinion of nanotechnology have pointed to a rather enthusiastic U.S. public, the public uptake of nanotechnology in Europe is more contained. The results of the Swiss publifocus on nanotechnology reveal a pragmatic attitude of citizens toward the emerging technologies, thus confirming what has been identified as a “balanced approach” in the NanoJury UK.

La2O3 promotional effect to Co3O4/γ-Al2O3 catalyst in the oxidative dehydrogenation of ethylbenzene with CO2 as soft oxidant

Co₃O₄/γ-Al₂O₃ catalysts with variable Co₃O₄ loadings (5–20 wt%) and deposition of 15% Co₃O₄ on La₂O₃/γ-Al₂O₃ were prepared by wet impregnation method. La₂O₃-γ-Al₂O₃ support with variable composition of La₂O₃ (2–6 wt%) were prepared by co-precipitation method. All the catalysts were tested for oxidative dehydrogenation of ethylbenzene with CO₂ as soft oxidant. Among the Co₃O₄/γ-Al₂O₃ catalysts, 15% Co₃O₄/γ-Al₂O₃ has shown good performance and hence this catalyst has been chosen to investigate the effect of La₂O₃ species. CO₂ pulse chemisorption data indicate more amount of CO₂ uptake over 15% Co₃O₄/4%La₂O₃/γ-Al₂O₃ catalyst which clearly indicates that this catalyst exhibits good performance in ethylbenzene dehydrogenation with CO₂ as soft oxidant because of reverse water gas shift reaction. Temperature programmed reduction studies indicate that the Co₃O₄ catalysts follow two step reduction mechanism from Co₃O₄ to CoO and then to Co and La₂O₃ promotional effect is visible through facile reduction of Co₃O₄ species. La₂O₃ doping has a vital influence in getting enhanced ethylbenzene conversion, styrene yield and alleviates catalyst deactivation compared to that of unpromoted Co₃O₄/γ-Al₂O₃ catalyst. TGA studies indicate the presence low amount coke deposition during time-on-stream over 15% Co₃O₄/4%La₂O₃/γ-Al₂O₃ catalyst compared to 15% Co₃O₄/γ-Al₂O₃ catalyst.