Monoterpenoid glucoindole alkaloids and iridoids from Pterocephalus pinardii

A new secondary metabolite, pterocephaline, along with the known cantleyoside, 7α‐morroniside, 3β,5α‐tetrahydrodesoxycordifoline lactam, 5S‐5‐carboxyvincoside, sweroside, and loganin have been isolated from the aerial parts of P. pinardii (Dipsacaceae). Moreover, cantleyoside‐methyl‐hemiacetal and cantleyoside‐dimethyl‐acetal were obtained as seco‐iridoid artifacts. The structures were elucidated by extensive spectroscopic methods including 1D‐(¹H, ¹³C and TOCSY) and 2D‐NMR (DQF‐COSY, HSQC and HMBC). Monoterpenoid glucoindole alkaloids were encountered for the first time in Dipsacaceae family. Copyright © 2010 John Wiley & Sons, Ltd.     

Small molecule analysis using laser desorption/ionization mass spectrometry on nano-coated silicon with self-assembled monolayers

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is an emerging technique for the determination of the molecular weight of biomolecules and their non-covalent complexes without fragmentation. One problem with this technique is the use of excess amounts of matrices, which may produce intense fragment ions and/or clusters at low mass ranges between 1 and 800 Da. These fragments lead to interference, especially concerning the signals of small target molecules. Here, a simple, reusable, and quite inexpensive approach was demonstrated to improve the effectiveness of laser desorption/ionization mass spectrometry (LDI-MS) analysis, especially for small molecules, without using matrix molecules. In this study, substrates with controllable morphologies and thicknesses were developed based on the self-assembly of silane molecules on silicon surfaces using N-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA) and octadecyltrichlorosilane (OTS) molecules. Prepared substrates with nano-overlayers were successfully used in the analysis of different types of small target molecules, namely acrivastine, l-histidine, l-valine, l-phenylalanine, l-arginine, l-methionine and angiotensin I. Our substrates exhibited clear peaks almost without fragmentation for all target molecules, suggesting that these surfaces provide a number of important advantages for LDI-MS analysis, such as ease of preparation, costs, reusability, robustness, easy handling and preventing fragmentation.     

Influence of Doping Different Rare Earth Ions on the Luminescence of CaTiO3‐based Phosphors

This paper reports the Gd³⁺, Dy³⁺, Tb³⁺ and Lu³⁺ doped CaTiO₃ based phosphors were synthesized by modified solid‐state reaction method and its crystal structure and luminescent properties were investigated. The X‐ray diffraction patterns (XRD) showed that the phosphors sintered at 1000 °C for 2 h were a pure CaTiO₃ phases. The optimization of reaction conditions were carried out by thermal gravimetry and differential thermal analysis methods (DTA/TG). Surface and elemental analyses were performed by using on SEM instrument. The excitation and emission spectras were recorded by photoluminescence spectrophotometer (PL).     

On the stability and properties of the polyacrylate/Na-MMT nanocomposite obtained by seeded emulsion polymerization

For high performance waterborne coatings usually polymer latexes with low emulsifier content are more preferred. Although polymer/clay nanocomposites offer improved properties, it is difficult to produce clay based nanocomposite latexes containing low emulsifier due to the stabilization problems especially caused by organoclays. Present study deals with the preparation of a tBA/BA/MAA ternary copolymer/clay nanocomposite containing 3 wt.% sodium montmorillonite (Na⁺-MMT) via seeded emulsion polymerization. Experimentally it was observed that even the usage of hydrophilic clay caused stabilization problem and a certain amount of emulsifier (>1 wt.%) was necessary to obtain stable latexes. In addition, the usage of a low molecular weight water soluble polymer as steric barrier was found to increase the stability of system. Obtained nanocomposite latex showed fine particle size diameter (127 nm) and very narrow size distribution (PDI = 0.06). The WAXD and TEM investigations indicated that a mostly exfoliated nanocomposite was obtained. Thermal analyses (DSC, DMTA and TGA) showed that there was no change at T_g of the copolymer while very high improvement was obtained for elastic modulus and a slight increase in thermal stability. According to the rheological measurements, the nanocomposite latex showed a higher low shear viscosity, a stronger shear thinning behavior and an improved physical stability in comparison to the reference latex.     

Click-chemistry for surface modification of monodisperse-macroporous particles

In this study, click chemistry was proposed as a tool for tuning the surface hydrophilicity of monodisperse-macroporous particles in micron-size range. The monodisperse-porous particles carrying hydrophobic or hydrophilic molecular brushes on their surfaces were obtained by the proposed modification. Hydrophilic poly(glycidyl methacrylate-co-ethylene dimethacrylate), poly(GMA-co-EDM) particles were hydrophobized by the covalent attachment of poly(octadecyl acrylate-co-propargyl acrylate), poly(ODA-co-PA) copolymer onto the particle surface via triazole formation by click chemistry. In the second part, Hydrophobic poly(4-chloromethylstyrene-co-divinylbenzene), poly(CMS-co-DVB) particles were hydrophilized by the covalent attachment of poly(vinyl alcohol), PVA onto their surface also via triazole formation by click chemistry. The presence of PVA and poly(ODA-co-PA) copolymer on the corresponding particles was shown by FTIR-DRS. After click-coupling reactions applied for both hydrophobic poly(CMS-co-DVB) and hydrophilic poly(GMA-co-EDM) particles, the marked changes in surface polarity were shown by contact angle measurements. Protein adsorption characteristics of plain and modified particles were investigated for both materials. In the isoelectric point of albumin, the non-specific albumin adsorption decreased from 225 to 80 mg/g by grafting PVA onto the poly(CMS-co-DVB) beads. On the other hand, the non-specific albumin adsorption onto the plain poly(GMA-co-EDM) beads increased from 50 to 400 mg/g by the covalent attachment of poly(ODA-co-PA) copolymer onto the bead-surface via click chemistry. The protein adsorption behavior was efficiently regulated by the covalent attachment of appropriate molecular brushes onto the surfaces of selected particles. The results indicated that "click chemistry" was an efficient tool for controlling the polarity of monodisperse-macroporous particles.     

Synthesis, characterization and catalytic behavior of functionalized mesoporous SBA-15 with various organo-silanes

Mesoporous silica SBA-15 has been synthesized and functionalized by one-step synthesis method to widen their various application possibilities. In this study, phenyltrimethoxysilane (PTMS), 3-mercaptopropyltrimethoxysilane (MPTMS) and trimethoxypropylsilane (TMPS) were used as silane precursors for the functionalization, and after treated with HCl solution, their catalytic activities were evaluated in the lactic acid-methanol esterification. The presence of anchoring of functional groups on SBA-15 was proved by XRD, FT-IR, BET surface area and pore size distributions. Good catalytic activity was observed especially for SBA-15-SO(3)H-MPTMS, and the catalytic activity order was determined as follows: SBA-15-SO(3)H-MPTMS>SBA-15-TMPS>SBA-15-PTMS, which is directly associated with the surface area, pore size and pore volume. As compared with homogeneous catalyst, SBA-15-SO(3)H-MPTMS heterogeneous catalyst shows remarkable performance, such as separation, recovery and reusability.     

In situ formed catalytically active ruthenium nanocatalyst in room temperature dehydrogenation/dehydrocoupling of ammonia-borane from Ru(cod)(cot) precatalyst

The development of simply prepared and effective catalytic materials for dehydrocoupling/dehydrogenation of ammonia-borane (AB; NH(3)BH(3)) under mild conditions remains a challenge in the field of hydrogen economy and material science. Reported herein is the discovery of in situ generated ruthenium nanocatalyst as a new catalytic system for this important reaction. They are formed in situ during the dehydrogenation of AB in THF at 25 °C in the absence of any stabilizing agent starting with homogeneous Ru(cod)(cot) precatalyst (cod = 1,5-η(2)-cyclooctadiene; cot = 1,3,5-η(3)-cyclooctatriene). The preliminary characterization of the reaction solutions and the products was done by using ICP-OES, ATR-IR, TEM, XPS, ZC-TEM, GC, EA, and (11)B, (15)N, and (1)H NMR, which reveal that ruthenium nanocatalyst is generated in situ during the dehydrogenation of AB from homogeneous Ru(cod)(cot) precatalyst and B-N polymers formed at the initial stage of the catalytic reaction take part in the stabilization of this ruthenium nanocatalyst. Moreover, following the recently updated approach (Bayram, E.; et al. J. Am. Chem. Soc.2011, 133, 18889) by performing Hg(0), CS(2) poisoning experiments, nanofiltration, time-dependent TEM analyses, and kinetic investigation of active catalyst formation to distinguish single metal or in the present case subnanometer Ru(n) cluster-based catalysis from polymetallic Ru(0)(n) nanoparticle catalysis reveals that in situ formed Ru(n) clusters (not Ru(0)(n) nanoparticles) are kinetically dominant catalytically active species in our catalytic system. The resulting ruthenium catalyst provides 120 total turnovers over 5 h with an initial turnover frequency (TOF) value of 35 h(-1) at room temperature with the generation of more than 1.0 equiv H(2) at the complete conversion of AB to polyaminoborane (PAB; [NH(2)BH(2)](n)) and polyborazylene (PB; [NHBH](n)) units.     

Calculation of vacancy transfer probabilities from K to L shell using the X-ray fluorescence parameters

The probabilities for vacancy transfer from the K to the L shell (η_KL), have been calculated for eleven high atomic number elements using the measured K and L shells X-ray production cross-sections. The targets were excited by 123.6 keV photon from a ⁵⁷Co annular radioactive source. K and L X-rays emitted by samples were counted with a Si(Li) detector. The measured values of η_KL were compared with the theoretical values and our early papers.     

Targeted Singlet Oxygen Generation Using Different DNA-Interacting Perylene Diimide Type Photosensitizers

Singlet oxygen quantum yields (Φ _Δ) of different perylene diimides (PDIs) containing phenyl (PDI-Ph), pyrene (PDI-Pyr), and indole (PDI-In) units in bay positions of the ring were determined using 1,3-diphenylisobenzofuran (DPBF) method in toluene/methanol (99:1) system. Pyrene-substituted PDI were the most efficient singlet oxygen generator among the investigated photosensitizers with a quantum yield of Φ _Δ?=?0.93 in toluene/methanol. Additionally, their binding affinities to G-quadruplex DNA structure were investigated by steady-state measurements. There were marked red shifts of absorbance bands for PDI-Pyr/DNA strand complexes with respect to the absorption maxima of DNA-free solution of PDI-Pyr in phosphate buffer at pH 6.     

Carleman-type theorems for generalized Q-holomorphic functions

In this work, we reduce the boundary condition of Riemann–Hilbert problem for generalized Q-holomorphic functions to the Vekua-type canonical form and obtain an appropriate analogue to the Carleman type representation for generalized Q-holomorphic functions.