Online thorium determination after preconcentration in a minicolumn having XAD-4 resin impregnated with N-benzoylphenylhydroxylamine by FI-spectrophotometry

A very sensitive and selective flow injection on-line determination method of thorium (IV) after preconcentration in a minicolumn having XAD-4 resin impregnated with N-benzoylphenylhydroxylamine is described. Thorium (IV) was selectively adsorbed from aqueous solution of pH 4.5 in a minicolumn at a flow rate of 13.6 mL min^?1, eluted with 3.6 mol dm^?3 HCl (5.6 mL min^?1), mixed with arsenazo-III (0.05% in 3.6 mol dm^?3 HCl stabilized with 1% Triton X-100, 5.6 mL min^?1) at confluence point and taken to the flow through cell of spectrophotometer where its absorbance was measured at 660 nm. Peak height was used for data analyses. The preconcentration factors obtained were 32 and 162, detection limits of 0.76 and 0.150 ??g L^?1, sample throughputs of 40 and 11 h^?1 for preconcentration times of 60 and 300 s, respectively. The tolerance levels for Zr(IV) and U(VI) metal ions is increased to 50-folds higher concentration to Th(IV). The proposed method was applied on different spiked tap water, sea water and biological sample and good recovery was obtained. The method was also applied on certified reference material IAEA-SL1 (Lake Sediment) for the determination of thorium and the results were in good agreement with the reported value.     

Synthesis,spectroscopy, and X-ray crystal structures of copper(II) complexes of the tridentate ONS ligand formed by condensation of 4,4,4-trifluoro-1-(2-thienyl)-2,4-butanedione with S-benzyldithiocarbazate

A new tridentate ONS ligand, H₂L, has been synthesized by condensing thenoyltrifluoroacetone(4,4,4-trifluoro-1-(2-thienyl)-2,4butaneanedione) with S-benzyldithiocarbazate and its structure determined by X-ray diffraction. In the solid state, the Schiff base exists as the ketoamine-thioketo tautomer but in solution and in the presence of copper(II), it converts to the enol-thiol form and deprotonates to give copper(II) complexes of formula, [CuL] and [CuLL¹] (L = doubly deprotonated form of the ligand; L¹ = py, bipy or phen] which have been characterized by magnetic, spectroscopic, and X-ray diffraction studies. An X-ray crystallographic analysis shows that [CuL(py)] has a square-planar geometry with the ligand coordinated to the copper(II) center via the enolate oxygen, the azomethinic nitrogen and the thiolate sulfur, the fourth coordination position being occupied by pyridine. The [CuL(bipy)] complex is five-coordinate with a structure close to square-pyramidal in which the Schiff base acts as a doubly deprotonated tridentate ONS ligand and bipy is bidentate.     

Optimization of carrier-mediated three-phase hollow fiber microextraction combined with HPLC-UV for determination of propylthiouracil in biological samples

Carrier-mediated three-phase hollow fiber microextraction combined with high-performance liquid chromatography-ultra violet detection (HPLC-UV) was applied for the extraction and determination of propylthiouracil in biological samples. Propylthiouracil (PTU) was extracted from 7.5 mL of the basic solution (the source phase) with pH 12 into an organic phase (n-octanol containing 6% (w/v) of Aliquat 336 as the carrier) impregnated in the pores of a hollow fiber, and finally was back extracted into 24 μL of the acidic solution located inside the lumen of the hollow fiber (the receiving phase). The extraction was performed through the gradient of counter ion from the source to the receiving phase. The effects of different variables on the extraction efficiency were studied simultaneously using an experimental design. A half-fractional factorial design was employed for screening to determine the variables significantly affecting the extraction efficiency. Then, the factors with significant effect were optimized using a central composite design (CCD) and the response surface equations were developed. The optimal experimental conditions obtained from this statistical evaluation included: source phase, pH 12; temperature, 25 °C; extraction time, 40 min; counter ion concentration, 2 mol L⁻¹ of NaClO₄; organic solvent 6% of Aliquat in octanol and without salt addition in the source phase. Under the optimized conditions, the preconcentration factors were between 125 and 198 and also the limit of detections (LODs) ranged from 0.1 μg L⁻¹ to 0.4 μg L⁻¹ in different biological samples. The calibration curve was linear (r² = 0.998) in the concentration range of 0.5-1000 μg L⁻¹. Finally, the feasibility of the proposed method was successfully confirmed by extraction and determination of PTU in human plasma and urine as well as the bovine milk and meat samples in microgram per liter, and suitable results were obtained (RSDs < 6.3%).     

Composite of conducting polyaniline-isobutylated urea formaldehyde: Preparation and characterization

Composite of conductive polyaniline-isobutylated urea formaldehyde have been prepared by chemical oxidative emulsion polymerization of aniline in the presence of isobutylated urea formaldehyde resin (BUFR) in toluene-water solvents at room temperature. The mass loading of polyaniline was controlled by varying the BUFR/aniline charging ratio as well as oxidant (ammonium persulfate)/aniline molar ratio. Some factors capable of affecting the yield and conductivity of composite, such as amount of the oxidant, type of the dispersants (span-80 and span-20), and amount of resin and organic acid (para-toluene sulfonic acid) were investigated. The prepared composites were characterized by FTIR spectroscopy and scanning electron microscopy (SEM).     

Multiobjective optimization scheme for industrial synthesis gas sweetening plant in GTL process

In industrial amine plants the optimized operating conditions are obtained from the conclusion of occurred events and challenges that are normal in the working units. For the sake of reducing the costs, time consuming, and preventing unsuitable accidents, the optimization could be performed by a computer program. In this paper, simulation and parameter analysis of amine plant is performed at first. The optimization of this unit is studied using Non-Dominated Sorting Genetic Algorithm-II in order to produce sweet gas with CO 2 mole percentage less than 2.0% and H 2 S concentration less than 10 ppm for application in Fischer-Tropsch synthesis. The simulation of the plant in HYSYS v.3.1 software has been linked with MATLAB code for real-parameter NSGA-II to simulate and optimize the amine process. Three scenarios are selected to cover the effect of (DEA/MDEA) mass composition percent ratio at amine solution on objective functions. Results show that sour gas temperature and pressure of 33.98 ? C and 14.96 bar, DEA/CO 2 molar flow ratio of 12.58, regeneration gas temperature and pressure of 94.92 ? C and 3.0 bar, regenerator pressure of 1.53 bar, and ratio of DEA/MDEA = 20%/10% are the best values for minimizing plant energy consumption, amine circulation rate, and carbon dioxide recovery.     

Electrochemical and chemical synthesis of nanostructure copoly(aniline-o-anisidine-o-toluidine) and study of its electrochemical behavior in organic sulfonic acid media

Terpolymerization of aniline, o-anisidine and o-toluidine was carried out by electrochemical and interfacial chemical polymerization. All homopolymers and terpolymer thin films have been synthesized through electropolymerization at room temperature in aqueous solutions containing 0.5 M of organic sulfonic acid, such as p-toluene sulfonic acid, methane sulfonic acid, sulfosalicylic acid, dodecylbenzene sulfonic acid, and 0.1 M of aniline, o-anisidine and o-toluidine monomers, using cyclic voltammetry method, applying a sequential linear potential scan at a rate of 25 mV s^?1 between ?0.1 and 0.9 V. The electrochemical terpolymerization has been performed at various mole ratios of monomers. Nanoparticles obtained from conjugation of homo- and terpolymer with organic sulfonic acids, were prepared by a chemical oxidation via interfacial chemical polymerization. SEM micrographs, FTIR spectra and conductivity measurements using four-probe method were applied for the characterization of the products. Terpolymer was characterized by higher conductivity than poly-o-toluidine and lesser than polyaniline and poly-o-anisidine. The solubility of terpolymers was dependent on the monomers mole ratio.     

Comparison of dispersive liquid–liquid microextraction and hollow fiber liquid–liquid–liquid microextraction for the determination of fentanyl,alfentanil, and sufentanil in water and biological fluids by high-performance liquid chromatography

Dispersive liquid–liquid microextraction (DLLME) and hollow fiber liquid–liquid–liquid microextraction (HF-LLLME) combined with HPLC–DAD have been applied for the determination of three narcotic drugs (alfentanil, fentanyl, and sufentanil) in biological samples (human plasma and urine). Different DLLME parameters influencing the extraction efficiency such as type and volume of the extraction solvent and the disperser solvent, concentration of NaOH, and salt addition were investigated. In the HF-LLLME, the effects of important parameters including organic solvent type, concentration of NaOH as donor solution, concentration of H₂SO₄ as acceptor phase, salt addition, stirring rate, temperature, and extraction time were investigated and optimized. The results showed that both extraction methods exhibited good linearity, precision, enrichment factor, and detection limit. Under optimal condition, the limits of detection ranged from 0.4 to 1.9 μg/L and from 1.1 to 2.3 μg/L for DLLME and HF-LLLME, respectively. For DLLME, the intra- and inter-day precisions were 1.7–6.4% and 14.2–15.9%, respectively; and for HF-LLLME were 0.7–5.2% and 3.3–10.1%, respectively. The enrichment factors were from 275 to 325 and 190 to 237 for DLLME and HF-LLLME, respectively. The applicability of the proposed methods was investigated by analyzing biological samples. For analysis of human plasma and urine samples, HF-LLLME showed higher precision, more effective sample clean-up, higher extraction efficiency, lower organic solvent consumption than DLLME.     

Cross-linking mechanisms of arginine and lysine with α,β-dicarbonyl compounds in aqueous solution

Cross-linking in proteins by α,β-dicarbonyl compounds is one of the most damaging consequences of reactive carbonyl species in vivo and in foodstuffs. In this article we investigate computationally the cross-linking of glyoxal and methylglyoxal with lysine and arginine residues using density functional theory and the wB97XD dispersion-corrected functional. Five pathways, A-E, have been characterized. In pathways A and B, the reaction proceeds via formation of the Schiff base, aldimine, followed by addition of arginine. In contrast, in pathways C-E, direct addition of arginine to the dicarbonyl compounds occurs first, leading to a dihydroxyimidazolidine intermediate, which then reacts with lysine after dehydration and proton transfer reactions. The results reveal that pathways A, C, and E are competitive whereas reactions via pathways B and D are much less favorable. Inclusion of up to five explicit water molecules in the proton transfer and dehydration steps is found to lower the energy barriers in the feasible pathways by about 5-20 kcal/mol. Comparison of the mechanisms of methylglyoxal-derived imidazolium cross-linking (MODIC) and glyoxal-derived imidazolium cross-linking (GODIC) shows that the activation barriers are lower for GODIC than MODIC, in agreement with experimental observations.     

Synthesis, experimental and theoretical characterization of N,N'-dipyridoxyl (1,4-butanediamine) Schiff-base ligand and its Cu(II) complex

A new N,N'-dipyridoxyl(1,4-butanediamine) [=H(2)BS] Schiff-base ligand and its Cu(II) salen complex, [Cu(BS)(H(2)O)(CH(3)OH)], were synthesized and characterized by IR, UV-vis, (1)H NMR, mass spectrometry and elemental analysis. Also, full optimization of the geometries, (1)H NMR chemical shifts (for the H(2)BS) and vibrational frequencies were calculated by using density functional theory (DFT) method. Structure of the H(2)BS ligand is not planar, i.e. two pyridine rings are not in the same plane. In the structure of the Cu complex, the Schiff-base ligand acts as a dianionic tetradentate ligand in N, N, O(-), O(-) manner. The coordinating atoms of BS(2-) occupy equatorial positions of the octahedral complex, where the H(2)O and CH(3)OH ligands locate at axial positions. The calculated results are in good agreement with the experimental data, confirming the suitability of the proposed and optimized structures for the H(2)BS ligand and its Cu complex.