Characteristic features of ferromagnetic resonance in iron-garnet films with orthorhombic magnetic anisotropy

The characteristic features of ferromagnetic resonance (FMR) were studied in bismuth-containing single-crystal iron-garnet films (BSIGFs) with no rapidly relaxing ions and relatively weak orthorhombic magnetic anisotropy (ORMA). The films were grown on (110) and (210) substrates by liquid-phase epitaxy from a supercooled flux solution. Attention is focused mainly on the unidirectional magnetic anisotropy in the film plane and on the effect of the film/substrate transitional surface layer on the FMR spectrum. Fiz. Tverd. Tela (St. Petersburg) 41, 1254–1258 (July 1999)     

1H, 13C, NH, HH, CH COSY, HH NOESY NMR and UV-vis studies of Solophenyl red 3BL dye azo-hydrazone tautomerism in various solvents

Azo-hydrazone tautomeric behavior of polyazo Solophenyl red 3BL (C.I. Direct 80) dye in different solvents (water, methanol and DMSO) was investigated using 1H, 13C, NH, HH, CH COSY, HH NOESY NMR techniques and UV-vis spectroscopy. Two-dimensional NMR experiments were used to assign 1H, 13C and 15N NMR lines unambiguously. Results showed that the hydrazone-form proton NMR signal appeared in the weakest field with respect to tetramethylsilane, in comparison with the amide and phenolic proton NMR signals. UV-vis absorption spectroscopic evidences showed that azo-hydrazone mixture exists in water and DMSO solvents, but in methanol, only azo tautomer was dominant, which was in a good agreement with NMR spectroscopic results.     

Bis[N,N′‐(2‐chlorobenzylidene)ethylenediamine‐κ2N,N′]copper(I) dichloridocuprate(I) acetonitrile solvate

The 1:1 adduct of N,N′‐bis(2‐chlorobenzylidene)ethylenediamine (cb₂en) with copper(I) chloride proves to be an ionic compound with Cu^I‐centred cations and anions, [Cu(C₁₆H₁₄Cl₂N₂)₂][CuCl₂]·CH₃CN. In the cation, the Cu^I atom has a flattened tetrahedral coordination geometry, with a small bite angle for the chelating ligands, which form a double‐helical arrangement around the metal centre. The anion is almost linear, as expected. The packing of the cations involves intermolecular π–π interactions, which lead to columns of translationally related cations along the shortest unit‐cell axis, with anions and solvent molecules in channels between them.     

Analysis of the dynamics of electrocaloric response in ferroelectrics using a ferromagnetic resonator

A method is proposed for studying the dynamics of the electrocaloric response of a ferroelectric capacitor to the pulsed action of the electric field, and the results of measurements are reported. The temperature of the capacitor was measured with the help of a ferromagnetic film resonator. The sensitivity of temperature measurements was ∼10⁻⁴ K/kHz. The recalculated temperature dependence of the resonance frequency showed that the ferroelectric ceramic sample was heated by 0.065 K and was cooled by 0.041 K relative to the thermostat temperature under the action of high-voltage pulses. The relaxation time of the electrocaloric effect of the 0.87PMN-0.13PT relaxor ferroelectric ceramic is 4.5 μs.     

Novel sulfur-doped niobium pentoxide nanoparticles: fabrication, characterization, visible light sensitization and redox charge transfer study

Novel sulfur-modified niobium(V) oxide nanoparticles (SNON) that firstly exhibited good visible light sensitization were fabricated by a modified sol–gel technique using a very stable sol containing niobium(V) chloride, oxalic acid, isopropanol as chelating agent and thiourea as sulfur source. The resulting S-doped Nb₂O₅ nanomaterials were characterized by cyclic voltammetry (CV), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDAX), scanning electron microscope (SEM), ultra-violet diffuse reflectance (UV-DRS) and thermogravimetry thermal Analysis (TG-DTA). As against the response of unmodified niobium(V) oxide nanoparticles (UNON), the doped samples show different electrochemical response indicating an induced charge transfer across the niobium pentoxide/solution interface, thus forming two anodic peaks and a cathodic peak. This important observation was confirmed by UV-DRS in terms of band bending due to sulfur doping. Upon sulfur-modification, the absorption edge extends into the visible light region. The SEM observation shows that the SNPN existed in the mode of polycrystalline structure and the average grain size 63 nm. The EDAX analysis of undoped Nb₂O₅ and sulfur doped Nb₂O₅ shows the Nb₂O₅ (98%) and S (2%) content of nanopowder. These SNON nanoparticles are expected to be suitable candidates as visible light niobium(V) oxide nanoparticles sensitization.     

Reverse Homogeneous Liquid–Liquid Extraction as a Miniaturized Method for Extraction of Aflatoxins from Pistachio and Wheat and LC Post-column Derivatization-Fluorescence Detection

A rapid and simple quantitative method for the simultaneous determination of the four aflatoxins (AFs) B1, B2, G1 and G2 was developed using reverse homogeneous liquid–liquid extraction (RHLEE) and HPLC post-column derivatization-fluorescence (HPLC-FL) detection. The method based on the rapid extraction of AFs from a methanolic sample into chloroform after addition of water containing KBr, with a method we called reverse homogeneous liquid–liquid extraction. Recoveries were in the range of 88–125% and the limits of detection were between 0.001–0.042 ng g^?1 for different AFs. Wheat and pistachio were chosen for the analysis of real samples and the method was also successfully applied to a FAPAS^® TEST MATERIAL (T04151).     

Thermal and structural studies of zinc zirconate nanoscale composite derived from sol–gel process

In the present investigation, a novel synthetic zinc zirconate nanocomposites were prepared by a sol–gel technique using a very stable sol containing zirconium acetylacetonate, zinc acetate, monoethanolamine, and 1,3-propanediol as chelating agent. Thermal analysis results indicated that the decomposition of zinc zirconate precursors occurred at 225 and 234 °C. The influence of thermal annealing (temperatures and duration) on their structural properties has been studied by means of X-ray diffraction and Fourier transform-infrared spectroscopy techniques. The results indicated that a higher percent of zinc zirconate is formed at 800 °C and reached maximum at 1,000 °C in 120 min. The morphology, composition, and bandgap properties of zinc zirconate nanoparticles were characterized by transmission electron microscope, scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy, and ultraviolet diffiuse reflectance. The SEM observation showed that average grain size of zinc zirconate nanopowders was 58 nm. The optical results revealed maximum absorbances at 394, 413, and 438 nm for ZnZrO₃ sample annealed at 400, 800, and 900 °C for 30 min, respectively. This is an indication that the nanopowder can absorb lights in the higher wavelength.     

High molecular weight poly(ethylene‐2,5‐furanoate); critical aspects in synthesis and mechanical property determination

Furan‐2,5‐dicarboxylic acid (FDCA) is a widely advocated renewable substitute for terephthalic acid (TA). Preparation of high molecular weight FDCA based polyesters by an industrially common combination of melt polymerization and subsequent solid state post condensation is described. Ultimately, poly(ethylene 2,5‐furanoate) (PEF) with absolute M_n = 83,000 g mol^?1 is obtained, determined by triple detection Size Exclusion Chromatography. The bulk polymer properties of FDCA based polyesters, necessary to evaluate their industrial potential were determined the Young's modulus of PEF is determined to be 2450 ± 220 MPa and the maximum stress 35 ± 8 MPa. The influence of crystallinity on the mechanical properties as function of temperature was determined by dynamic mechanical thermal analysis. A detailed differential scanning calorimetry study on the crystallization behavior of high molecular weight PEF allowed to calculate the equilibrium melting temperature (T_m⁰) of 239.3 and 239.7 °C for the first and second melting peak, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4191–4199     

Facile One‐pot Synthesis of Substituted Dihydropyrrol‐2‐ones via Four‐component Domino Reaction of Amines,Dialkyl Acetylenedicarboxylates and Formaldehyde

A mild and efficient method for the one‐pot synthesis of substituted dihydropyrrol‐2‐one derivatives is described via four‐component domino reaction of amines, dialkyl acetylenedicarboxyaltes and formaldehyde in the presence of 1‐methyl‐2‐oxopyrrolidinium hydrogen sulfate ([Hpyro][HSO₄]) as ionic liquid catalyst. This facile approach proceeded smoothly in good to high yields and pure products are separated from the reaction mixture by simple filtration.