蛋白质的电化学分析研究进展

对蛋白质的电化学分析的进展及应用进行综述。从蛋白质的极谱行为、在固体电极上的电化学行为、催化氢波、与小分子物质的配合作用等多角度介绍了近期的研究热点,分析了蛋白质化学研究的意义与现状,并对今后的发展方向作了展望,引用相关文献28篇。     

氨基酸在乙醇/磷酸氢二钾双水相体系中分配行为

研究了5种结构和性质各异的氨基酸(谷氨酸,半胱氨酸,苯丙氨酸,赖氨酸,精氨酸)在亲水性有机溶剂乙醇和磷酸盐溶液形成的乙醇/K2HPO4双水相体系中的分配行为及其影响因素。当双水相体系中乙醇的质量分数从22%增加到30%时,半胱氨酸和苯丙氨酸的分配系数明显增大,其它三种氨基酸的分配系数变化幅度不大;当磷酸盐的质量分数从14%增加到22%时,氨基酸的分配系数的变化均不明显;双水相体系的pH值对氨基酸的分配系数影响较大,当pH增加时,5种氨基酸的分配系数均增加,但是当pH约为9.5时,苯丙氨酸、半胱氨酸的分配系数接近相等但与其它3种氨基酸的分配系数相差较多,当pH为6.0~8.0时,苯丙氨酸的分配系数远远大于另外4种氨基酸。氨基酸的支链结构中含有非极性基团将导致其分配系数的增加。     

ATR-FTIR investigation on the complexation of myo-inositol hexaphosphate with aluminum hydroxide

The adsorption isotherm of and the pH effect on the adsorption of myo-inositol hexaphosphate (myo-IP6) on amorphous aluminum hydroxide was investigated. It was found that the adsorption isotherm of myo-IP6 on aluminum hydroxide could be well fitted with the Freundlich isotherm. The amount of myo-IP6 adsorbed remained almost constant in the range of pH 4.0 to 7.0, but it decreased considerably as the initial pH was over 7. The adsorption of myo-IP6 resulted in an increase in the pH level due to the release of OH(-) ions, which suggested that the adsorption of myo-IP6 on aluminum hydroxide was caused by a ligand exchange reaction. ATR-FTIR analysis of myo-IP6 in solution and adsorbed on aluminum hydroxide at different pH were performed. The ATR-FTIR investigation indicated that myo-IP6 was adsorbed onto aluminum hydroxide by forming inner-sphere complexes and adsorption facilitated the deprotonation of phosphate groups. The asymmetric vibration of the PO bond in AlPO(-)(3) appearing at a lower frequency than that in the terminal HPO(-)(3) indicated that Al bound to the O atom not as strongly as the H atom did. The ATR-FTIR investigation and theoretical calculation (with the Gaussian 03 program) revealed that three of the six phosphate groups in myo-IP6 molecules were bound to aluminum hydroxide while the other three remained free when myo-IP6 was adsorbed on aluminum hydroxide.     

V－Ag－Ni系氧化物的表面氧性质与甲苯选择性氧化的催化性能

制备了一系列Ｖ、Ａｇ、Ｎｉ原子比不同的三元氧化物，应用ＴＰＤ－ＭＳ技术研究了样品表面氧的性质，并测定了甲苯选择性氧化生成苯甲醛的催化活性．实验结果表明，样品表面存在有多种吸附的氧物种．在脱附温度＜９００℃：当Ｎｉ含量对Ａｇ（或Ｖ）的原子比为０．２５或０．５０时，仅在低温处出现有表面的Ｏ－和Ｏ２－两种氧物种的脱附峰；当Ｎｉ含量对Ａｇ（或Ｖ）的原子比增高到＞０．７５时，除有表面的Ｏ－和Ｏ２－两种氧物种的脱氧峰外，还有由于样品中的物相转变所生成的有晶格氧（Ｏ２－）参与脱附的脱氧峰．随着Ｖ－Ａｇ中Ｎｉ含量的改变，脱氧峰的脱附活化能Ｅｄ值也发生变化，３＃样品（Ｖ：Ａｇ：Ｎｉ＝１：１：０．７５）的Ｅｄ值最低，生成苯甲醛的选择性也最高．因此，样品的Ｅｄ值与生成苯甲醛的选择性之间存在着顺变关系．     

巡游电子系化合物La0.8Ce0.2(Fe1-xCox)11.4Si1.6的磁热效应

对制备的化合物La0.8Ce0.2(Fe1-xCox)11.4Si1.6(x=0.02,0.04,0.06)的相组成、巡游电子变磁转变(IEMT)特性和磁热效应(MCE)进行了研究。粉末X射线衍射结果表明,经1373 K真空退火处理7 d后,化合物La0.8Ce0.2(Fe1-xCox)11.4Si1.6(x=0.02,0.04,0.06)均为单相立方NaZn13型晶体结构。随着Co含量由x=0.02增加到x=0.06,样品的居里温度TC由207 K上升到277 K。在0~1.5 T磁场变化下,x=0.02,0.04,0.06时样品的最大磁熵变|ΔSM(T)|分别为40.17,12.60和7.65 J.kg-1.K-1,可见该化合物有巨大的磁熵变,而且随Co含量的增加最大磁熵变迅速减小。该化合物的巨大磁熵变来源于TC处的一级相变,以及在TC以上由磁场诱导IEMT,但由于Co原子对Fe原子的替代能够抑制变磁转变的发生,因此该系化合物最大磁熵变随Co含量的增加迅速减小。     

Comparison of different methods to measure contact angles of soil colloids

We compared five different methods, static sessile drop, dynamic sessile drop, Wilhelmy plate, thin-layer wicking, and column wicking, to determine the contact angle of colloids typical for soils and sediments. The colloids (smectite, kaolinite, illite, goethite, hematite) were chosen to represent 1:1 and 2:1 layered aluminosilicate clays and sesquioxides, and were either obtained in pure form or synthesized in our laboratory. Colloids were deposited as thin films on glass slides, and then used for contact angle measurements using three different test liquids (water, formamide, diiodomethane). The colloidal films could be categorized into three types: (1) films without pores and with polar-liquid interactions (smectite), (2) films with pores and with polar-liquid interactions (kaolinite, illite, goethite), and (3) films without pores and no polar-liquid interactions (hematite). The static and dynamic sessile drop methods yielded the most consistent contact angles. For porous films, the contact angles decreased with time, and we consider the initial contact angle to be the most accurate. The differences in contact angles among the different methods were large and varied considerably: the most consistent contact angles were obtained for kaolinite with water, and illite with diiodomethane (contact angles were within 3 degrees); but mostly the differences ranged from 10 degrees to 40 degrees among the different methods. The thin-layer and column wicking methods were the least consistent methods.     

Dynamics of ice nucleation on water repellent surfaces

Prevention of ice accretion and adhesion on surfaces is relevant to many applications, leading to improved operation safety, increased energy efficiency, and cost reduction. Development of passive nonicing coatings is highly desirable, since current antiicing strategies are energy and cost intensive. Superhydrophobicity has been proposed as a lead passive nonicing strategy, yet the exact mechanism of delayed icing on these surfaces is not clearly understood. In this work, we present an in-depth analysis of ice formation dynamics upon water droplet impact on surfaces with different wettabilities. We experimentally demonstrate that ice nucleation under low-humidity conditions can be delayed through control of surface chemistry and texture. Combining infrared (IR) thermometry and high-speed photography, we observe that the reduction of water-surface contact area on superhydrophobic surfaces plays a dual role in delaying nucleation: first by reducing heat transfer and second by reducing the probability of heterogeneous nucleation at the water-substrate interface. This work also includes an analysis (based on classical nucleation theory) to estimate various homogeneous and heterogeneous nucleation rates in icing situations. The key finding is that ice nucleation delay on superhydrophobic surfaces is more prominent at moderate degrees of supercooling, while closer to the homogeneous nucleation temperature, bulk and air-water interface nucleation effects become equally important. The study presented here offers a comprehensive perspective on the efficacy of textured surfaces for nonicing applications.     

ZnO添加量对Pd/Zr0.5Al0.5O1.75催化剂净化稀燃天然气汽车尾气性能的影响

以掺杂不同含量ZnO的Zr_0.5Al_0.5O_1.75为载体,制备了系列1.5%Pd催化剂.在模拟稀燃天然气汽车尾气条件下,测试了催化剂的活性和抗水性,并用N₂吸附-脱附、X射线衍射、H₂程序升温还原和X射线光电子能谱等手段对催化剂进行了系统表征.研究结果表明,ZnO的添加及添加量对催化剂的活性和抗H₂O性有明显影响,其中以ZnO添加量为15%时制备的复合氧化物为载体的催化剂活性最佳.当模拟尾气中不含H₂O时,该催化剂对甲烷的起燃温度（T₅₀）和完全转化温度（T₉₀）分别为278和314℃;在含H₂O时,该催化剂的T₅₀和T₉₀分别为342和371℃.     

制备方法对Pd-MnOx/γ-Al2O3催化剂分解地表O3性能的影响（英文）

分别用溶胶凝胶法和分步沉淀法制备了MnOx+γ-Al2O3和MnOx/γ-Al2O3,用等体积浸渍法将等量的Pd(NO3)2分别浸渍于其上,再将它们分别涂覆于堇青石上,得到不同物理化学性质的整体式催化剂,并采用X射线衍射、X射线光电子能谱、程序升温还原和低温N2吸附-脱附等技术对催化剂进行表征.结果表明,制备方法和MnOx焙烧温度明显影响催化剂中MnOx的物相、表面Mn物种和表面活性氧物种的分布及织构性质.活性测试结果表明,两种制备方法得到的催化剂于16–90 oC,380000–580000 h–1条件下均可将0.6μL·L–1 O3完全分解;尤其是溶胶凝胶法制备的Pd/γ-Al2O3+MnOx/γ-Al2O3催化剂分解O3活性较好,催化剂表面Mn2+:Mn3+:Mn4+=1.7:1:3(mol).     

离子色谱脉冲安培法测定蜂蜜中的葡萄糖、果糖、蔗糖

利用离子色谱脉冲安培检测器对蜂蜜中葡萄糖、果糖、蔗糖的测定方法进行了研究。采用CARBOPAC^TM PAl分离柱和脉冲安培检测器,对淋洗分离条件进行了实验,选择50mmol/L NaOH作淋洗液,可使蜂蜜中的葡萄糖、果糖、蔗糖很好地分离。检出限分别为：葡萄糖2μg/kg,果糖2μg/kg,蔗糖5μg/kg。加标回收率为90％－108％。该方法只需简单的前处理、无基体干扰,分离效果好,测定准确率高,适用于蜂蜜中葡萄糖、果糖、蔗糖的测定。