The complexation of Cr(III) and Cr(VI) with flavones in micellar media and its use for the spectrophotometric determination of chromium

The complexation of chromium by different flavonoid dyes in micellar media has been studied, in particular the reaction between chromium and quercetin. Micellar effects, the reaction pathway proposed and the application of the method to the determination of Cr(VI) and Cr(VI) + Cr(III) mixtures are discussed.     

Evaluation of soybean seed protein extraction focusing on metalloprotein analysis

Two methods of protein extraction for soybean seeds were evaluated in terms of preservation of the metal ions bound to proteins after the extraction and separation procedures. The proteins were firstly separated according to their molar masses by polyacrylamide gel electrophoresis. Then, the protein bands were mapped by synchrotron radiation X-ray fluorescence in order to establish which metal ions were present in each one. Finally, some mapped protein bands were decomposed by microwave-assisted combustion and Ca, Cu, K, Mg, Mn, and Zn were quantified by inductively coupled plasma mass spectrometry or inductively coupled plasma optical emission spectrometry. The extraction methods studied were Method A (based on the treatment of ground soybean seeds with hexane and their extraction with Tris–HCl and β-mercaptoethanol) and Method B (based on the treatment of ground soybean seeds with petroleum ether and their extraction with Tris–HCl, dithiothreitol, phenylmethanesulfonyl fluoride, sodium dodecyl sulfate and potassium chloride). The best method was Method B, in which a 78% higher extraction efficiency was obtained when compared to Method A. Additionally, the metal-protein interactions were more appropriately preserved when Method B was applied, where the most affected ions were those that are bound weakly to proteins, such as Ca, K, and Mg.     

Specific adsorption of azide ions on mercury electrodes from constant ionic strength solutions

The adsorption of azide ions on mercury from aqueous solutions of NaN₃+NaF at constant ionic strength has been studied by measurements of the double layer capacity. Taking into account changes in the structure of the diffuse layer, it was possible to show that the properties of the inner layer are similar to those observed previously in solutions of pure NaN₃, and that the same adsorption isotherm applies to both systems.     

Phototoxic effects of Hypericum extract in cultures of human keratinocytes compared with those of psoralen

Extracts of Hypericum perforatum (St. John's wort) are used in the treatment of depression. They contain the plant pigment hypericin and hypericin derivates. These compounds have light-dependent activities. In order to estimate the potential risk of phototoxic skin damage during antidepressive therapy, we investigated the phototoxic activity of hypericin extract using cultures of human keratinocytes and compared it with the effect of the well-known phototoxic agent psoralen. The absorbance spectrum of our Hypericum extract revealed maxima in the whole UV range and in parts of the visible range. We cultivated human keratinocytes in the presence of different Hypericum concentrations and irradiated the cells with 150 mJ/cm2 UVB, 1 J/cm2 UVA or 3 h with a white light of photon flux density 2.6 mumol m-2 s-1. The determination of the bromodeoxyuridine incorporation rate showed a concentration- and light-dependent decrease in DNA synthesis with high hypericin concentrations (> or = 50 micrograms/mL) combined with UVA or visible light radiation. In the case of UVB irradiation a clear phototoxic cell reaction was not detected. We found phototoxic effects even with 10 ng/mL psoralen using UVA with the same study design as in the case of the Hypericum extract. These results confirm the phototoxic activity of Hypericum extract on human keratinocytes. However, the blood levels that are to be expected during antidepressive therapy are presumably too low to induce phototoxic skin reactions.     

Effect of Sintering Temperature on the Corrosion and Wear Behavior of Protective SiO2-Based Sol-Gel Coatings

Sol-gel hybrid organic-inorganic and inorganic SiO₂-based protective coatings with and without added 3 m glass particles were developed and tested for their corrosion and wear behavior of an stainless steel substrate (AISI316L). The corrosion resistance greatly increases by incorporating glass particles in the sols. The incorporation of particles in the coatings allows the synthesis of thicker crack-free coatings. On the other hand, the corrosion resistance increases for coatings with a higher organic content obtained at lower sintering temperature. These coatings are also highly stable in saline aqueous solutions. However, the wear resistance is badly affected by the hybrid character of the SiO₂ matrix. The optimum coating process in terms of corrosion and wear resistance, appears to be a hybrid system with a dense SiO₂ network achieved at intermediate sintering temperatures.     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005     

Stereoselective synthesis of 4 alpha-hydroxy-8,12-guaianolides from santonin

Hydroxyester 2, easily obtained from santonin (1), has been transformed into 10 alpha-hydroxyguai-3-en-8,12-olide 6, a good intermediate for the synthesis of natural 8,12-guaianolides. Compound 6 was obtained from 2 by photochemical rearrangement of its acetyl derivative 7, stereoselective hydrogenation on Pd/C, reduction, regioselective elimination, hydrolysis, and lactonization. The synthesis of the natural guaianolides 3-5 was carried out in two sequences in which the regioselective elimination of a hydroxyl group at C10 with triflic anhydride or SOCl2 to afford, respectively, the endo or exo double bond on C10 and the regioselective opening of the C3-C4 alpha-epoxide were the key steps.     

Theory for the short-time response of small Hg n clusters after excitation

The short-time behavior of small Hg _n clusters immediately after single or double ionization is studied. We calculate self-consistently the ground state electronic energyE of ionized Hg _n clusters. Upon ionization changes of the potential energy surface (PES) occur, which govern the atomic motion in the cluster. These changes depend on cluster size and charge and are determined by the interplay between the localization of the holes within an ionic core and the polarization energy of the neutral rest of the cluster. In the case of single ionization of the cluster the PES results mainly from hole delocalization. In contrast, in the case of double ionization the PES is governed almost only by strong environment polarization. We use our theory to explain the physical origin of the oscillations in the ionization cross-section of singly and doubly excited Hg _n clusters observed in recent pump-probe experiments.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.