Atmospheric chemistry of dimethyl phosphonate, dimethyl methylphosphonate, and dimethyl ethylphosphonate

Rate constants for the reactions of OH radicals and NO3 radicals with dimethyl phosphonate [DMHP, (CH3O)2P(O)H], dimethyl methylphosphonate [DMMP, (CH3O)2P(O)CH3], and dimethyl ethylphosphonate [DMEP, (CH3O)2P(O)C2H5] have been measured at 296 +/- 2 K and atmospheric pressure using relative rate methods. The rate constants obtained for the OH radical reactions (in units of 10(-12) cm3 molecule(-1) s(-1)) were as follows: DMHP, 4.83 +/- 0.25; DMMP, 10.4 +/- 0.6; and DMEP, 17.0 +/- 1.0, with a deuterium isotope effect of k(OH + DMMP)/k(OH + DMMP-d9) = 4.8 +/- 1.2. The rate constants obtained for the NO3 radical reactions (in units of 10(-16) cm3 molecule(-1) s(-1)) were as follows: DMHP, < 1.4; DMMP, 2.0 +/- 1.0; and DMEP, 3.4 +/- 1.4. Upper limits to the rate constants for the O3 reactions of < 8 x 10(-20) cm3 molecule(-1) s(-1) for DMHP and < 6 x 10(-20) cm3 molecule(-1) s(-1) for DMMP and DMEP were determined. Products of the reactions of OH radicals with DMHP, DMMP, and DMEP were investigated in situ using atmospheric pressure ionization mass spectrometry (API-MS) and, for the DMMP and DMEP reactions, Fourier transform infrared (FT-IR) spectroscopy. API-MS analyses showed the formation of products of molecular weight 96 and 126, attributed to CH3OP(O)(H)OH and (CH3O)2P(O)OH, respectively, from DMHP; of molecular weight 110, attributed to CH3OP(O)(CH3)OH, from DMMP; and of molecular weight 124 and 126, attributed to CH3OP(O)(C2H5)OH and (CH3O)2P(O)OH, respectively, from DMEP. FT-IR analyses showed formation (values given are % molar yields) of the following: from DMMP, CO, 54 +/- 6; CO2, 5 +/- 1 in dry air; HCHO, 3.9 +/- 0.7; HC(O)OH, < 1.4 in dry air; RONO2, approximately 4; and formate ester, approximately 8; and from DMEP, CO, 50 +/- 7; CO2, 11 +/- 4; CH3CHO, 18 +/- 8; HCHO, < 7; HC(O)OH, < 6; RONO2, < or = 5; and formate ester, 5.0 +/- 1.5. Possible reaction mechanisms are discussed.     

Tetragonal to monoclinic phase transition observed during Zr anodisation

Plasma electrolytic oxidation (PEO) is a coating procedure that utilises anodic oxidation in aqueous electrolytes above the dielectric breakdown voltage to produce oxide coatings that have specific properties. These conditions facilitate oxide formation under localised high temperatures and pressures that originate from short-lived microdischarges at sites over the metal surface and have fast oxide volume expansion. Anodic ZrO₂ films were prepared by subjecting metallic zirconium to PEO in acid solutions (H₂C₂O₄ and H₃PO₄) using a galvanostatic DC regime. The ZrO₂ microstructure was investigated in films that were prepared at different charge densities. During the anodic breakdown, an important change in the amplitude of the voltage oscillations at a specific charge density was observed (i.e., the transition charge density (Q ^T)). We verified that this transition charge is a monotonic function of both the current density and temperature applied during the anodisation, which indicated that Q ^T is an intrinsic response of this system. The oxide morphology and microstructure were characterised using SEM and X-ray diffraction experiments (XRD) techniques. X-ray diffraction analysis revealed that the change in voltage oscillation was correlated with oxide microstructure changes during the breakdown process.     

Studies of proteasome inhibition and apoptosis induction in triple‐negative breast cancer cells by novel amino acid–polypyridine–copper complex

An innovative ternary copper(II) complex, [Cu(Cl‐PIP)(Tyr)Cl]_n, has been synthesized and characterized using infrared spectroscopy, elemental analysis and single‐crystal X‐ray diffraction analysis. X‐ray crystallography indicates that the Cu atom is five‐coordinated in a square‐pyramidal configuration. The unit forms a one‐dimensional chain along the crystallographic c‐axis. The complex was screened for cytotoxicity against a panel of eight human cancer cell lines, namely MDA‐MB‐231, CAL‐51, K562, HeLa, SGC‐7901, A549, MCF‐7 and SMMC‐7721. The best anticancer activity was obtained with triple‐negative breast cancer CAL‐51 and MDA‐MB‐231 cell lines, with IC₅₀ values in the range 0.035–0.10 μM, and this was better than using carboplatin. The complex inhibits proteasomal chymotrypsin‐like activity, and docking studies reveal its interaction with 20S proteasome. In addition, the complex causes accumulation of ubiquitinated proteins, induces apoptosis and inhibits cell proliferation, indicating its great potential as a novel therapy for triple‐negative breast cancer.     

Isotactic poly(propylene‐co‐1‐pentene‐co‐1‐hexene) terpolymers: Synthesis,molecular characterization,and evidence of the trigonal polymorph

Terpolymers based on propylene with 1‐pentene and 1‐hexene as comonomeric units are satisfactorily synthesized using a metallocene catalyst. Thus, several terpolymers are prepared with distinct overall compositions in comonomers as well as three different 1‐pentene/1‐hexene ratios at a given composition to evaluate the influence on polymerization activity, intrinsic viscosity, and microstructural details. The new trigonal δ polymorph is observed in those quenched terpolymers with a global content in comonomers of about 14 mol %, independently of the ratio between both comonomers. However, preliminary results indicate a profound influence of that ratio on the crystallization rate. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3251–3259     

Multicomponent one-pot synthesis of (dihydro-1H-benzo[d]imidazole) phosphonate

Abstract

We present a multicomponent reaction strategy to synthesize a (dihydro-1H-benzo[d]imidazole)phosphonate family of compounds, using benzimidazoles, diethyl chlorophosphate and aliphatic amines as starting reactants. Giving its simplicity, our procedure involves reaction times of only few hours and avoid the usage of any catalyst agent. All the newly synthesized compounds were characterized by Nuclear Magnetic Resonance spectroscopy (¹H, ¹³C and ³¹P) and mass spectrometry by the DART method.     

Endo-cavity Complexes between Calix[6]arene Dianions and Aliphatic Ammonium Cations: Structure of a Hexylammonium Complex by X-ray Crystallography

The interactions of calix[6]arene and p-tert-butylcalix[6]arene with aliphatic amines in acetonitrile solution were studied by spectrophotometric titrations in the UV region and ¹H NMR spectrometry. Calix[6]arenes can undergo two deprotonations by aliphatic amines and the extent of the second proton transfer is mainly governed by the size of the α-substituent of the amine. ¹H NMR spectra show that the macrocycle adopts a 1,2,3-alternate conformation and that the α-hydrogens of the ammonium ions are shielded by the π-clouds of the aromatic rings. The X-ray crystal structure of the dihexylammonium complex of the p-tert-butylcalix[6]arene dianion, reported here, confirms the 1,2,3-alternate conformation and shows one of the two ammonium moieties encapsulated in the inner cavity of the macrocycle.     

Chlorine‐Enhanced Surface Mobility of Au(100)

Motivated by experimental studies of two‐dimensional Ostwald ripening on Au(100) electrodes in chlorine‐containing electrolytes, we have studied diffusion processes using density functional theory. We find that chlorine has a propensity to temporary form AuCl complexes, which diffuse significantly faster than gold adatoms. With and without chlorine, the lowest activation energy is found for the exchange mechanism. Chlorine furthermore reduces the activation energy for the detachment from kink sites. Kinetic Monte Carlo simulations were performed on the basis of extensive density functional theory calculations. The island‐decay rate obtained from these Monte Carlo simulations, as well as the decay rate obtained from the theoretical activation energies and frequency factors when inserted into analytical solutions for Ostwald ripening, are in agreement with experimental island‐decay rates in chlorine‐containing electrolytes.     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.