Co-eluent effect in partition chromatography. Rhamnose-xylose separation with strong and weak cation-exchangers in aqueous ethanol

The effect of ethanol in aqueous eluent on the chromatographic separation was studied at 298 K. Two sugars, L-rhamnose and D-xylose, were separated by using strong and weak cation-exchangers as a stationary phase. The ionic form of the resins was Na+ or Ca2+. The separations were carried out with sugar feed concentrations up to 35 wt% and with both low (about 1%) and high (about 10%) feed volume to bed volume ratios. The separation of the sugars was improved by adding ethanol into the eluent. The separation was also significantly enhanced when the weak cation-exchangers with the greatest affinity for water were used instead of strong cation-exchangers as a separation medium for the sugars having different hydrophilicities. The experimental data were successfully explained with a rate-based column model, which accounted for the volume changes of the stationary phase. A thermodynamic sorption model was utilized in column calculations.     

Intercalation of a pendant-arm tetraazamacrocycle into molybdenum disulfide

A novel macrocycle-MoS2 nanocomposite has been synthesized and characterized using the exfoliation/restacking properties of LiMoS2, providing the first of a new family of intercalation compounds.     

Advantages of boron filters in instrumental epithermal neutron activation analysis of biological materials

Boron carbide (B₄C) and boron nitride (BN) irradiation filters have been constructed and used for epithermal neutron activation analysis of biological materials. The major advantage offered by these filters in this application is the substantial reduction of interfering matrix activities. Consequently some trace elements of interest can be determined instrumentally with minimum delay. The filters are particulary beneficial if utilized in short reactor irradiations for rapid analysis of biological materials.     

Comparison of polydimethyl siloxane stationary phases with 5% and 50% phenyl substitution for the separation of organophosphorus and organonitrogen pesticides under optimized gas chromatographic conditions

The CGC analysis of 25 organophosphorus and organonitrogen pesticides was optimized on two different stationary phases, namely a 5% diphenyl dimethyl silicone (SE-54 type) and a 50% diphenyl dimethyl silicone (OV-17 type) by selecting the best temperature program conditions, using computer simulation.     

Rapid identification and quantitation of compounds with forensic interest using fast liquid chromatography-ion trap mass spectrometry and library searching

A fast liquid chromatography-electrospray tandem mass spectrometric (LC-ESI-MS-MS) method by using a monolithic column, gradient elution and ion trap mass spectrometer was developed for 14 forensically interesting and chemically different compounds. All compounds were eluted within 2.5 min and the total analysis time was 5 min including stabilisation time required for the next injection. All the compounds, basics, neutrals and acids were efficiently ionised by positive ion ESI. A laboratory library including MS-MS spectra and retention times was developed and tested. Results with 476 standard samples and 50 authentic samples showed that the compounds studied can be unambiguously identified with the library. A quantitative method was developed for the compounds using external calibration. The evaluation process showed good linearity of the method and reasonable repeatability. Limits of detection ranged from 10.0 to 50.0 ng/ml.     

Evaluation of measurement uncertainty for analytical procedures using a linear calibration function

In the EURACHEM/CITAC draft ”Quantifying uncertainty in analytical measurement” estimations of measurement uncertainty in analytical results for linear calibration are given. In this work these estimations are compared, i.e. the uncertainty deduced from repeated observations of the sample vs. the uncertainty deduced from the standard residual deviation of the regression. As a result of this study it is shown that an uncertainty estimation based on repeated observations can give more realistic values if the condition of variance homogeneity is not correctly fulfilled in the calibration range. The complete calculation of measurement uncertainty including assessment of trueness is represented by an example concerning the determination of zinc in sediment samples using ICP-atomic emission spectrometry. Received: 9 February 2002 Accepted: 17 April 2002     

The fluoride ion-selective electrode in flow injection analysis: Part 1. General Methodology

A simple flow-injection system for determination of traces of fluoride by means of the fluoride-selective electrode is presented. A comparison of several flow-cell arrangements confirmed the advantages of a well-jet design. Systematic investigations of the parameters affecting response times (i.e., polishing procedure, flow rate, carrier composition) established the optimal experimental conditions for measurements down to 1 μg l^?1 fluoride. Calibration plots in the lower μg l^?1 range were neither Nernstein nor linear, but good precision (0.5–5%) was obtained even when the potential differences for concentration steps of one decade were as small as 3 mV.     

Component reconstruction in the primary space of spectra and concentrations. Alternating regression and related direct methods

A set of methods that extract the spectral components in a chromatographic run is considered. The methods do not need libraries of previously known spectra or retention times. The methods have been developed for two-dimensional spectra but they can also be used for chromatographic analyses with a single-channel detector. The methods are direct; they do not use principal components as the starting point. Alternating regression (AR) remains in the primary space of spectra and concentrations during the calculations. Random numbers are used as the starting spectra. Regression is used to solve first for the concentrations, then for the spectra. The method uses two kinds of constraints: all spectra and concentrations are forced to be positive; and all concentration profiles are forced to a unimodal shape with a single local maximum. It is assumed that all observations are a linear sum of components. Compact alternating regression (CAR) is a new variant of the basic AR. The idea is to replace multiplication of a large matrix by two multiplications of smaller matrices. This typically speeds up the iterations by a factor of ten. AR and CAR have been successfully used with combined techniques such as gas chromatography—mass spectrometry and liquid chromatography with UV—visible detection. The reliability of the solution is checked by repeatedly injecting noise and performing the analysis several times. This produces estimates of confidence intervals. AR and CAR have recently been extended to handle single-dimensional signals. Examples are single-channel detectors such as the flame ionization detector in gas or liquid chromatography with a fixed-wavelength UV detector. A batch of samples is used as the observation matrix. As a result, one obtains both the concentrations and the elution shapes of individual chromatographic peaks.     

Validation steps for traceability of linear calibrated chemical measurements

Based on the new draft of the EURACHEM/CITAC Guide Traceability in Chemical Measurement, this publication describes how traceability can be achieved for chemical measurements using a linear calibration function. Traceability can be accomplished without larger expenditure, if the measurement is calibrated on the basis of appropriate reference standards and the linear regression employed is selected and validated statistically in a suitable form. The determination of nickel in aqua regia eluates of sediment samples, employed for an ICP-OES measurement, is used as a practical illustration of this approach.