回收率依赖回收产品质量的再制造EOQ模型

研究回收率依赖回收产品质量情况下制造/再制造混合系统的EOQ模型.该模型假设顾客的需求可通过新产品的制造和回收产品的再制造两种方式满足,且这两种产品无质量差异;需求率是确定的、连续的;总成本包括制造和再制造的固定启动成本,可销售产品和回收品的库存成本,以及缺货成本.当假设缺货成本无限大时给出不允许缺货情况下的模型.给出算例验证模型的有效性.     

高效率激光二极管泵浦100 Hz 3.5 J Nd∶YAG MOPA激光器

研制了结构简单、高效率激光二极管泵浦Nd∶YAGM0PA激光器.振荡级输出单脉冲能量1.13 J,重复频率为100HZ.MOPA系统输出最大单脉冲能量2.35 J,光-光转换效率为39%.实验结果和理论计算符合较好.     

3,9-咔唑聚合物基态和激发态性质的理论研究

用密度泛函B3LYP方法对3,9-咔唑低聚物[(3,9-carbazole)n(n=1,2,3,4,6,8)]体系进行了全优化, 计算得到电离能、电子亲合势、空穴抽取能及电子抽取能等相关能量, 用ZINDO和TD-DFT方法计算得到吸收光谱; 分析了各种能量的变化及光谱规律. 用外推法由低聚物分子的各种性质与聚合度n相联系得到高聚物的性质, 将所得结果与2,7-咔唑(2,7-carbazole)及类似聚合物进行了比较分析. 结果表明, 3,9位聚合的咔唑整体共轭程度降低, 光谱蓝移, 其IP值和聚芴相近, 可以作为空穴接受材料应用于多层电子荧光器件的空穴传输层. 用CIS方法进行优化得到部分分子的S1激发态结构, 用ZINDO和TD-DFT方法得到对应的发射光谱.     

旋转滑动弧氩等离子体裂解甲烷制氢

采用切向气流和磁场协同驱动的旋转滑动弧氩等离子体,先通过光谱分析法计算了其电子温度和电子密度,了解其物理特性,将其应用于甲烷裂解制氢,研究了进气流量和CH_4/Ar比对反应效果的影响。结果表明,该滑动弧系统电子温度为1.0-2.0 e V,电子密度高达1015cm~(-3),是介于热与低温等离子体之间的一种等离子体形式,具有独特的物理特性,可以在达到较高反应效率的同时,保持较大的处理量;在CH_4裂解制氢实验中,CH_4转化率可达22.1%-70.2%,并随进气流量和CH_4/Ar比的增大均逐渐降低;H_2选择性为21.2%-61.2%,并随进气流量的增大先基本不变后有所增大,随CH_4/Ar比的增大逐渐降低;与应用于甲烷裂解的不同形式的低温等离子体对比(如微波、射频、介质阻挡放电等)可以发现,旋转滑动弧在获得较高甲烷转化率、较高H_2选择性和较低制氢能耗的同时,还可以保持较大的处理量,即进气流量可达6-20 L/min。     

Chain Conformation and Local Rigidity of Soluble Polyimides(Ⅱ): Isomerized Polyimides in THF

Two soluble isomerized polyimides(PIs)synthesized from 2,2′-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride(6FDA)with either 2,2′-dimethylbenzidine(2,2′-DMB)or 3,3′-DMB were investigated by means...     

Many-body approach to spin-dependent transport in quantum dot systems

By means of a diagram technique for Hubbard operators, we show the existence of a spin-dependent renormalization of the localized levels in an interacting region, e.g., quantum dot, modeled by the Anderson Hamiltonian with two conduction bands. It is shown that the renormalization of the levels with a given spin direction is due to kinematic interactions with the conduction subbands of the opposite spin. The consequence of this dressing of the localized levels is a drastically decreased tunneling current for ferromagnetically ordered leads compared to that of paramagnetically ordered leads. Furthermore, the studied system shows a spin-dependent resonant tunneling behavior for ferromagnetically ordered leads.     

Discharges in the JET tokamak where the safety factor profile is identified as the critical factor for triggering internal transport barriers

Joint European Torus discharges which demonstrate the critical role the safety factor profile, q, can play in the formation of internal transport barriers (ITB) are examined. In these discharges, the target parameters, including the E x B flows, were kept virtually the same, except for the q profile. In a discharge with a nonmonotonic q, an ITB was triggered whereas a discharge with monotone q made no such transition. Thus, there is strong evidence that the q profile was the critical factor for the triggering of an ITB. Possible interpretations of this finding are discussed.     

Effects of feedback from collimating, focusing, and spot-array generating outcoupler gratings in surface-emitting semiconductor lasers

We experimentally demonstrate that a grating outcoupler used for complex beam shaping (spot-array generation) can produce unintentional optical feedback that severely disturbs the integrated in-plane laser that illuminates the coupler. Simulations show that these outcouplers, in contrast to conventional collimating or focusing outcouplers, tend to produce high levels of feedback in spite of the detuning used to suppress feedback. Further, this feedback is focused to high intensity in the laser gain medium. This focused light acts as a seed for the nonlinear self-focusing that causes wave-front distortion and filamentation, which degrades the beam quality.     

On smoothing of pulp quality characteristics in a flow system

In this paper the mixing effect of a new flow system of large pulp reservoirs is investigated. The analogy of the reservoir and an information channel is pointed out. Especially, the transfer function of the channel is derived and the calculation of this function by high-speed computers is given.The cases where the quality of the stream changes discontinuously (chemical pulp) or continuously (mechanical pulp) are investigated separately. In the former case a quantity for the mixing effect is defined.