F-18-FDG uptake is a reliable predictory of functional recovery of akinetic but viable infarct regions as defined by magnetic resonance imaging before and after revascularization

Identification of akinetic but viable myocardium is important for the selection of patients for coronary revascularization. In order to assess predictive values of end-diastolic wall thickness and dobutamine induced wall thickening obtained by magnetic resonance imaging (MRI) and [18F]Fluorodeoxyglucose uptake assessed by positron emission tomography (F-18-FDG-PET), these parameters were compared to recovery of left ventricular function after successful revascularization. Forty patients with chronic myocardial infarction and regional a- or dyskinesia by ventriculography underwent rest- and dobutamine-MRI studies (10 microg dobutamine/kg body weight/min) and F-18-FDG-PET. Viability of the infarct region was considered to be present if; 1) end-diastolic wall thickness was > or =5.5 mm; 2) dobutamine induced wall thickening > or =2 mm could be measured; and 3) normalized F-18-FDG-uptake was > or =50% in > or =50% of akinetic segments. Preserved end-diastolic wall thickness was found in 32/40 patients, functional improvement during dobutamine infusion in 26/40 patients and preserved F-18-FDG-uptake in 29/40 patients. After revascularization regional left ventricular function improved in 25/40 patients. Positive and negative predictive values and diagnostic accuracy were 78%, 100%, and 83% for preserved end-diastolic wall thickness, 92%, 93%, and 93% for dobutamine inducible contraction reserve and 86%, 100%, and 90% for preserved F-18-FDG-uptake. Quantitative assessment of dobutamine induced systolic wall thickening by MRI and F-18-FDG-uptake by PET are highly accurate techniques for the identification of viable myocardium and prediction of functional recovery after successful revascularization. Preserved end-diastolic wall thickness results in an overestimation of viable myocardium compared to functional improvement, but wall thickness <5.5 mm excludes recovery of regional function.     

Pulsed laser deposition of atomically flat La1-xSrxMnO3 thin films using a novel target geometry

A new ablation target geometry is presented that was used to produce thin films of La_1-xSr_xMnO₃ grown heteroepitaxially on SrTiO₃ by pulsed reactive crossed-beam laser ablation. The films were grown in order to perform angle-resolved photoelectron spectroscopy, which demands that the surface be atomically flat. In situ and ex situ analysis shows that this condition was met, even after depositing to a thickness of over 100 nm. PACS 61.10.-i; 61.18.Bn; 68.47.Gh; 71.27.+a; 81.15.Fg     

Unusual current‐voltage characteristics of single crystalline and bicrystalline La0.7Ca0.3MnO3 films

The current‐voltage characteristics of single crystalline and bicrystalline La_0.7Ca_0.3MnO₃ films were measured and analyzed. Several epitaxial films, as well as 45° [001]‐tilt grain boundaries, display current‐voltage characteristics which are asymmetric with respect to polarity reversal of the bias current. One epitaxial film has a polarity dependent resistance of ～340kΩ and of ～670kΩ in forward and in reverse direction, respectively.     

Three-dimensional subwavelength imaging by a photonic-crystal flat lens using negative refraction at microwave frequencies

We experimentally demonstrate subwavelength resolution imaging at microwave frequencies by a three-dimensional (3D) photonic-crystal flat lens using full 3D negative refraction. The photonic crystal was fabricated in a layer-by-layer process. A subwavelength pinhole source and a dipole detector were employed for the measurement. By point-by-point scanning, we obtained the image of the pinhole source shown in both amplitude and phase, which demonstrated the imaging mechanism and subwavelength feature size in all three dimensions. An image of two pinhole sources with subwavelength spacing showed two resolved spots, which further verified subwavelength resolution.     

Crime and punishment: Does it pay to punish?

Crime is the result of a rational distinctive balance between the benefits and costs of an illegal act. This idea was proposed by Becker more than forty years ago (Becker (1968) [1]). In this paper, we simulate a simple artificial society, in which agents earn fixed wages and can augment (or lose) wealth as a result of a successful (or not) act of crime. The probability of apprehension depends on the gravity of the crime, and the punishment takes the form of imprisonment and fines. We study the costs of the law enforcement system required for keeping crime within acceptable limits, and compare it with the harm produced by crime. A sharp phase transition is observed as a function of the probability of punishment, and this transition exhibits a clear hysteresis effect, suggesting that the cost of reversing a deteriorated situation might be much higher than that of maintaining a relatively low level of delinquency. Besides, we analyze economic consequences that arise from crimes under different scenarios of criminal activity and probabilities of apprehension.     

Turbulence transition and the edge of chaos in pipe flow

The linear stability of pipe flow implies that only perturbations of sufficient strength will trigger the transition to turbulence. In order to determine this threshold in perturbation amplitude we study the edge of chaos which separates perturbations that decay towards the laminar profile and perturbations that trigger turbulence. Using the lifetime as an indicator and methods developed in Skufca et al., Phys. Rev. Lett. 96, 174101 (2006), we show that superimposed on an overall 1/Re scaling predicted and studied previously there are small, nonmonotonic variations reflecting folds in the edge of chaos. By tracing the motion in the edge we find that it is formed by the stable manifold of a unique flow field that is dominated by a pair of downstream vortices, asymmetrically placed towards the wall. The flow field that generates the edge of chaos shows intrinsic chaotic dynamics.     

Locally conformal method for acoustic finite-difference time-domain modeling of rigid surfaces

The finite-difference time-domain method is a simple but powerful numerical method for simulating full-wave acoustic propagation and scattering. However, the method can demand a large amount of computational resources. Traditionally, continuously curved boundaries are represented in a stair-step fashion and thus accurately modeling scattering from a boundary will require a finer discretization than would otherwise be necessary for modeling propagation in a homogeneous medium. However, a fine discretization might not be practical due to limited computational resources. A locally conformal technique is presented here for modeling acoustic scattering from continuously curved rigid boundaries. This technique is low cost, simple to implement, and gives better results for the same grid discretization than the traditional stair-step representation. These improvements can be traded for a coarser discretization which reduces the computational burden. The improved accuracy of this technique is demonstrated for a spherical scatterer.     

Multiple conversion and optical limiting in a subharmonic-pumped parametric oscillator

We demonstrate that multiple coexisting frequency-conversion processes can occur in an externally resonant second-harmonic generator under suitable conditions. Besides the generation of signal and idler waves by subharmonic-pumped parametric oscillation, sum-frequency mixing among the resonant subharmonic (1064-nm), signal, and idler waves was observed, leading to additional emission wavelengths around the harmonic wavelength (532 nm). The output waves both exhibit high frequency stability, with as long as 4 h of mode-hop-free parametric oscillation, and are continuously tunable over 2 GHz. Near degeneracy the parametric oscillator operates as an optical limiter for the harmonic wave.     

Theory of Multiple NMR Spin Echoes of HD Impurities in Solid Para-H2

The theory of the formation of NMR multiple echoes for isotopic impurities (HD) in solid para-H₂has been developed for the case of weak quantum tunneling of the impurities. The results show that even for low tunneling rates (100–1000 Hz), NMR multiple echoes can be observed for experimentally accessible nuclear spin polarizations and can be used to provide an independent test for the existence of tunneling in the solid hydrogens.     

Time-resolved electron transport studies on InGaAs/GaAs-QWIPs

Due to the short internal response time, quantum-well infrared photodetectors (QWIPs) are interesting for high-speed applications such as heterodyne spectroscopy or laser pulse monitoring. We studied the photocurrent transients of InGaAs/GaAs-QWIPs after irradiation with infrared laser pulses of 250 fs duration. The excitation wavelength of about 9 μm matches the peak wavelength of the QWIP structure. The photocurrent transient consists of two different dynamical components, representing the fast photoionization in the quantum-wells and the slow injection current that compensates the remaining space charge. The investigations of the different components as a function of temperature and bias voltage were performed on a nanosecond time-scale. The experimental separation of the two photocurrent contributions allows us to determine the photoconductive gain. The Fourier transform of the photocurrent transient was compared with other experimental methods including heterodyne detection and microwave rectification. The quantitative agreement between these different measurement techniques is excellent.