Influence of wall heat loss on the emission characteristics of premixed ammonia-air swirling flames interacting with the combustor wall

The influence of wall heat loss on the emission characteristics of ammonia-air swirling flames has been investigated employing Planar Laser-Induced Fluorescence imaging of OH radicals and Fourier Transform Infrared spectrometry of the exhaust gases in combustors with insulated and uninsulated walls over a range of equivalence ratios, ?, and pressures up to 0.5 MPa. Strong influence of wall heat loss on the flames led to quenching of the flame front near the combustor wall at 0.1 MPa, resulting in large unburned NH₃ emissions, and inhibited the stabilization of flames in the outer recirculating zone (ORZ). A decrease in heat loss effects with an increase in pressure promoted extension of the fuel-rich stabilization limit owing to increased recirculation of H₂ from NH₃ decomposition in the ORZ. The influence of wall heat loss resulted in emission trends that contradict already reported trends in literature. NO emissions were found to be substantially low while unburned NH₃ and N₂O emissions were high at fuel-lean conditions during single-stage combustion, with values such as 55 ppmv of NO, 580 ppmv of N₂O and 4457 ppmv of NH₃ at ? = 0.8. In addition, the response of the flame to wall heat loss as pressure increased was more important than the effects of pressure on fuel-NO emission, thereby leading to an increase in NO emission with pressure. It was found that a reduction in wall heat loss or a sufficiently long fluid residence time in the primary combustion zone is necessary for efficient control of NH₃ and N₂O emissions in two-stage rich-lean ammonia combustors, the latter being more effective for N₂O in addition to NO control. This study demonstrates that the influence of wall heat loss should not be ignored in emissions measurements in NH₃-air combustion, and also advances the understanding of previous studies on ammonia micro gas turbines.     

Synthesis of alkyl α‐aminomethyl‐phenylphosphinates and N,N‐bis(alkoxyphenylphosphinylmethyl)amines by the microwave‐assisted Kabachnik–Fields reaction

As a novel extension, the Kabachnik–Fields reaction was applied to the synthesis of alkyl α‐aminomethyl‐phenylphosphinates, and the double phospha‐Mannich reaction was utilized in the preparation of bis(alkoxyphenylphosphinylmethyl)amines. A total of 27 new aminophosphinate derivatives were synthesized by the microwave‐assisted solvent‐free condensation of alkyl phenyl‐H‐phosphinates, paraformaldehyde, and primary or secondary amines. The starting P‐species were also prepared under microwave conditions. The formation of the N‐methylated aminomethyl‐phenylphosphinate by‐products was also investigated.     

Thermal cured epoxy resins using certain calixarenes and their esterified derivatives as curing agents

The acetyl esterified calixarene (CA) derivatives were prepared from calix[4]resorcinarene (CRA), and p‐tert‐butylcalixarene (BCA[n], n = 4, 6, 8), respectively. Using these CA derivatives as curing agents, the thermal curing reactions of two multifunctional epoxy resins (jER 828, 186 g/equiv., and ESCN, 193.7 g/equiv.) were investigated. The temperatures of glass transition (T_g) and decomposition (T) were measured by DSC and TGA, respectively. Based on the yields, T_gs, and T_ds of the thermal cured jER 828 epoxy resin with CRA‐E100, the curing conditions were optimized to be tetrabutylphosphonium bromide (TBPB) as catalyst in NMP at 160 °C for 15 h. Under this curing condition, the cured materials of jER 828 or ESCN using various CA derivatives as curing agents were prepared. Except for BCA4 derivatives, the yields of thermal curing reaction were higher than 90%. T_gs and Ts of the resultant cured materials were in the range of 113–248 °C and 363–404 °C, respectively. These results mean that the cured epoxy resins with excellent T_gs were successfully formed by using CA derivatives as curing agents. It was also found that the T_gs of cured epoxy resins were strongly affected by the degree of esterification of CA derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1931–1942, 2010     

Speciation of the Vanadium(III) Complexes with 1,10-Phenanthroline, 2,2′-Bipyridine,and 8-Hydroxyquinoline

The complex species formed between vanadium(III) and 1,10-phenanthroline (phen), 2,2′-bipyridine (bipy), and 8-hydroxyquinoline (8hq) were studied in aqueous solution by means of electromotive forces measurements, emf(H), at 25 °C with 3.0 mol⋅dm⁻³ KCl as the ionic medium. The potentiometric data were analyzed using the least-squares computational program LETAGROP, taking into account the hydrolytic vanadium(III) species formed in solution. Analysis of the vanadium(III)–phen system data shows the formation of [VHL]⁴⁺, [V(OH)L]²⁺, [V₂OL₂]⁴⁺ and [V₂OL₄]⁴⁺ complexes. In the vanadium(III)–bipy system the [VHL]⁴⁺, [V(OH)L]²⁺, [V₂OL₂]⁴⁺ and [V₂OL₄]⁴⁺ complexes were observed, and in the vanadium(III)–8hq system the complexes [V(OH)L]⁺, [V(OH)₂L], [VL₂]⁺ and [VL₃] were detected.     

Prins-type macrocyclizations as an efficient ring-closing strategy in natural product synthesis

Prins-type macrocyclizations have recently emerged as a successful strategy in the synthesis of polyketide-derived natural products. This reaction provides a concise and selective means to form tetrahydropyran-containing macrocyclic rings of varying size. A high degree of functionality within the macrocycle is tolerated and the yields for these transformations are typically good to excellent. Since the initial report of a Prins macrocyclization reaction in 1979, examples of this approach did not re-emerge until 2008. However, the use of this method in natural product synthesis has rapidly gained momentum in the synthetic community, with multiple examples of this macrocyclization tactic reported in the recent literature.     

Multienzymatic preparation of 3-[(1R)-1-hydroxyethyl]benzoic acid and (2S)-hydroxy(phenyl)ethanoic acid

The use of two oxidoreductases (an aldoketo reductase from Escherichia coli JM109 and an alcohol dehydrogenase from Lactobacillus brevis) has demonstrated that it is possible to prepare enatiomerically pure diols in a one-pot operation. The reactions were applied to the synthesis of (1R)-1-[3-(hydroxymethyl)phenyl]ethanol and (1S)-1-phenylethane-1,2-diol, using a two-step procedure. The yield is nearly quantitative and the enantiomeric purity is greater than 95%. A third step has been introduced by adding a cell biocatalyst showing dihydrodiol dehydrogenase activity from Pseudomonas fluorescens N3. This allows for the preparation of 3-[(1R)-1-hydroxyethyl]benzoic acid and (2S)-hydroxy(phenyl)ethanoic acid.     

Maximal Inequalities of the Itô Integral with Respect to Poisson Random Measures or Lévy Processes on Banach Spaces

We are interested in maximal inequalities satisfied by a stochastic integral driven by a Poisson random measure in a general Banach space.