Substoichiometric extraction of phosphorus

A study of the substoichiometric extraction of phosphorus is described. Phosphorus was extracted in the form of ternary compounds such as ammonium phosphomolybdate, 8-hydroxyquinolinium phosphomolybdate, tetraphenylarsonium phosphomolybdate and tri-n-octylamine phosphomolybdate. Consequently, phosphorus was extracted substoichiometrically by the addition of a substoichiometric amount of molybdenum for all four phosphomolybdate compounds. On the other hand, phosphorus could be separated substoichiometrically with a substoichiometric amount of tetraphenylarsonium chloride or tri-n-octylamine. Stoichiometric ratios of these ternary compounds obtained substoichiometrically were 1∶12∶3 for phosphorus, molybdenum and organic reagent. Applicability of these compounds to phosphorus determination was also discussed.     

Development of rectangular column structured titanium oxide photocatalysts anchored on silica sheets by a wet process

Commercially available powdered photocatalysts such as P-25 are known to show high photocatalytic performance. However, in practical use, their anchoring onto a substrate without any binders is still very difficult. The purpose of this study is to design and develop high-performance photocatalysts that can be anchored onto a substrate, and to this end we have prepared a titanium oxide photocatalyst using a wet process. The results of this study led to the successful development of rectangular column structured titanium oxide crystals which could be anchored onto silica sheets. The rectangular columnar crystal was 100- 500 nm wide and 1000- 5000 nm long. Moreover, investigations on the complete oxidation reaction of acetaldehyde into CO₂ and H₂O showed a high performance equivalent to that of the most efficient marketed powdered photocatalysts.     

Targeting cell surface receptors with ligand-conjugated nanocrystals

To explore the potential for use of ligand-conjugated nanocrystals to target cell surface receptors, ion channels, and transporters, we explored the ability of serotonin-labeled CdSe nanocrystals (SNACs) to interact with antidepressant-sensitive, human and Drosophila serotonin transporters (hSERT, dSERT) expressed in HeLa and HEK-293 cells. Unlike unconjugated nanocrystals, SNACs were found to dose-dependently inhibit transport of radiolabeled serotonin by hSERT and dSERT, with an estimated half-maximal activity (EC(50)) of 33 (dSERT) and 99 microM (hSERT). When serotonin was conjugated to the nanocrystal through a linker arm (LSNACs), the EC(50) for hSERT was determined to be 115 microM. Electrophysiology measurements indicated that LSNACs did not elicit currents from the serotonin-3 (5HT(3)) receptor but did produce currents when exposed to the transporter, which are similar to those elicited by antagonists. Moreover, fluorescent LSNACs were found to label SERT-transfected cells but did not label either nontransfected cells or transfected cells coincubated with the high-affinity SERT antagonist paroxetine. These findings support further consideration of ligand-conjugated nanocrystals as versatile probes of membrane proteins in living cells.     

Preferential solubilization of dodecanol from dodecanol-limonene binary oil mixture in sodium dihexyl sulfosuccinate microemulsions: effect on optimum salinity and oil solubilization capacity

Solubilization of dodecanol-limonene binary oil mixtures has been studied in saturated Winsor type I and III sodium dihexyl sulfosuccinate microemulsions. The systems showed different oil solubilization behavior below and above dodecanol volume fraction 0.2. Below 0.2 dodecanol volume fraction regular Winsor type microemulsions formed. The oil solubilization was characterized in this concentration range by the optimum salinity and the maximum characteristic length. Dodecanol showed Langmuirian-type surface excess adsorption at the vicinity of the surfactant layer. Variation of the optimum salinity and middle phase characteristic length with increasing dodecanol concentration could be linked to changes in the dodecanol surface excess. These relationships were used to develop new mathematical models for the optimum salinity and characteristic length as a function of oil phase composition. Both models yield excellent agreement with the data. Above dodecanol volume fraction 0.2 regular Winsor type III microemulsions are not formed. Therefore our new models are not applicable in this concentration range.     

Application of self-assembly for replacing chromate in corrosion protection of zinc

Due to the toxic and carcinogenic properties of hexavalent chromium ion, the corrosion protection with chromating technique needs replacement. Several environmentally friendly alternative metal pretreatments have already been proposed. One of these methods is the application of self-assembling molecules to form mono- or multilayers on the metal surfaces. These layers can prevent metal dissolution due to their dense and stable structure. The objective of our studies was to protect zinc surface against corrosion, with a thin phosphonate layer. Aqueous solutions of diphosphonic acid with different alkyl chain lengths were applied with different treatment times. The layer formation, stability, and corrosion protection of these films were monitored by electrochemical impedance spectroscopy and the effect of 1,5-diphosphono-pentane (DPP) on zinc was studied by polarization curves. The wetting properties were determined by static contact angle measurement. 1,5-Diphosphono-pentane forms a thin layer, with a pronounced protective ability in neutral aqueous solutions. The application of self-assembling molecules can be a promising method to replace the chromating technique on zinc surface.     

Substoichiometric determination of phosphorus

Phosphorus in orchard leaves (NBS SRM-1571) and spinach (SRM-1570) was determined by various substoichiometric analytical methods such as the direct method, GRASHCHENKO's method and the method of carrier amount variation. All samples were labelled with³²P radioisotope. The data obtained by the method of carrier amount variation were also treated by the method of least squares instead of De VOE's method. Phosphorus concentration in orchard leaves was 0.206±0.011% by the direct method, 0.219±0.011% by GRASHCHENKO's method, 0.211±0.011% by the method of carrier amount variation and 0.207±0.007% by the method of least squares, respectively. These values agree with the value reported by NBS (0.21±0.01%). Furthermore, these concentrations obtained by various substoichiometric methods were compared with those by radioactivation reported in a prevoius paper.     

The Pharmaceutical Use of Captisol®: Some Surprising Observations

The purpose of this paper is to share some recent observations on the pharmaceuticaluses and properties of Captisol^® or SBE_7M--CD in controlled porosity osmotic pump tablets (CP-OPT) and the underlying mechanism/sthat lead to apparent zero-order drug release pattern. It would have been simple toattribute the apparent zero-order release mechanism/s of poorly water-soluble drugsfrom CP-OPTs and pellets utilizing Captisol^®as both a solubilizing andosmotic agent, to purely osmotic and diffusional components. However, the mechanismmay be more related to a counterbalancing of physical properties as the concentration of Captisol^®changes within the matrix. Specifically, the initial concentration of Captisol^®within a core is 0.3–0.4M. When this drops to lower values an osmotic pressure drop occurs across the membrane. Therefore, drug release should not follow apparent zero-order kinetics if all the drug is solubilized. However, as the viscosity within the tablet also drops, the apparent diffusion coefficient of both Captisol^® and drug increases. Therefore, it appears that there is an initial resistance (hydraulic pressure) to fluid flow from the tablet through the rate-limiting microporous membrane. This resistance decreases so that even as osmotic pressure and concentration differences drop with time, counterbalancing faster release occurs. Osmotic driving force appears to be the most important initial driving force but a diffusional component becomes more significant with time.     

Fluorescence-dip infrared spectroscopy and predissociation dynamics of OH A 2Sigma+ (v = 4) radicals

Fluorescence-dip infrared spectroscopy, an UV-IR double-resonance technique, is employed to characterize the line positions, linewidths, and corresponding lifetimes of highly predissociative rovibrational levels of the excited A (2)Sigma(+) electronic state of the OH radical. Various lines of the 4 <--2 overtone transition in the excited A (2)Sigma(+) state are observed, from which the rotational, centrifugal distortion, and spin-rotation constants for the A (2)Sigma(+) (v = 4) state are determined, along with the vibrational frequency for the overtone transition. Homogeneous linewidths of 0.23-0.31 cm(-1) full width at half maximum are extracted from the line profiles, demonstrating that the N = 0 to 7 rotational levels of the OH A (2)Sigma(+) (v = 4) state undergo rapid predissociation with lifetimes of < or =23 ps. The experimental linewidths are in near quantitative agreement with first-principles theoretical predictions.     

Substoichiometric precipitation of silicon as barium fluorosilicate

Distillation and substoichimetric precipitation for silicon have been developed for the determination of trace amounts of silicon. It is based on substoichiometric precipitation as barium fluorosilicate and the distillation of silicon tetrafluoride. The separation has been applied for the determination of silicon in gallium arsenide and NBS steel as standard reference material.     

The synthesis of phenanthrodibenzothiophenes

The synthesis of phenanthro[1,2-c]dibenzothiophene (6) , phenanthro[4,3-c]dibenzothiophene (10) , phenanthro[2,1-a]dibenzothiophene (14) , phenanthro[3,4-a]dibenzothiophene (16) , phenanthro[1,2-a]dibenzothiophene (19) , phenanthro[2,1-b]dibenzothiophene (20) , 8-methylphenanthro[3,2-a]dibenzothiophene (24) , 7-methylphenanthro[1,2-a]dibenzothiophene (25) , phenanthro[3,4-a]dibenzothiophene (27) , phenanthro[4,3-a]-dibenzothiophene (28) , 6-methylphenanthro[2,3-a]dibenzothiophene (31) , and 5-methylphenanthro[4,3-a]dibenzothiophene (32) is described.