The Electronic Structure of Azuleno[1,2,3-cd]phenalene and Azuleno[5,6,7-cd]phenalene,a Comparison

The photoelectron (PE.) spectra of azuleno[l, 2, 3-cd]phenalene ( 1 ) and azuleno- [5,6,7-cd]phenalene( 2 ) have been recorded. The first five bands of both compounds could be assigned to transitions corresponding to removal of electrons from 4a₂, 6b₁, 5b₁, 3a₂ and 4b_l orbitals. This assignment is based mainly on a comparison between the observed ionization potentials and orbital energies calculated in a HMO and a PPP model. The UV./VIS. polarized absorption spectrum of 1 in the region 10000–45000 cm^?1 has been measured by means of the stretched film technique. The measurements were performed in polyethylene sheets at 77°K. Several bands could be assigned to π* ← π transitions calculated by a PPP-CI method. A comparison between the electronic structures of 1 and 2 is made by means of a simple HMO diagram.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Empfindliche Methode zur Bestimmung geringer Schwefelgehalte in Wolframoxiden und Wolframpulvern

Zusammenfassung Der Schwefel in Wolframoxiden und Wolframpulvern wird im Wasserstoffstrom bei 800°C in H₂S übergeführt, der in Cadmium-Zinkacetat-Lösung absorbiert und anschließend jodometrisch titriert wird. Die Anwesenheit von WO₃ ermöglicht eine quantitative Umwandlung von Sulfatschwefel in H₂S. Die Standardabweichung beträgt für ein Wolframoxid mit 310 ppm S±13 ppmS und für ein Wolfram-Metallpulver mit 45 ppm S±1 ppm S.

---

Sulfur is converted into hydrogen sulphide by hydrogenation at 800°C. This H₂S is absorbed in a cadmium-zinc acetate solution and titrated iodometrically. The presence of WO₃ makes possible a quantitative conversion of sulphate sulphur into H₂S. The standard deviation is ±13 ppm S for WO₃ containing 310 ppm S, and ±1 ppm S for metallic tungsten powder containing 45 ppm S.

---

---

Herrn Prof. Dr.E. Hayek zum 60. Geburtstag gewidmet.     

Synthesis of (-)-ilimaquinone via a radical decarboxylation and quinone addition reaction

[reaction: see text] A stereoselective synthesis of (-)-ilimaquinone (4) is presented. The synthetic strategy is based on a novel radical decarboxylation and quinone addition methodology that produces quinone 7 from reaction of thiohydroxamic acid derivative 8 with benzoquinone (9). Final functionalization of 7 to ilimaquinone (4) is achieved by exploring the electronic effects of the residual thiopyridyl group.     

Report on three aliphatic dimethylarsinoyl compounds as common minor constituents in marine samples. An investigation using high-performance liquid chromatography/inductively coupled plasma mass spectrometry and electrospray ionisation tandem mass spectrometry

Three water-soluble aliphatic arsenicals, dimethylarsinoyl acetate (DMAA), dimethylarsinoyl ethanol (DMAE), and dimethylarsinoyl propionate (DMAP), were identified in marine biological samples. Sample extracts in methanol/water (1 + 1) were analysed by cation-exchange high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICPMS). Eluate fractions from the HPLC/ICPMS analyses containing the compounds in question were collected and subjected to analysis by electrospray ionisation tandem mass spectrometry (ESI-MS/MS), which provided supportive evidence for the structures of the three compounds. The concentrations of the three arsenicals were determined in 37 marine organisms comprising algae, crustaceans, bivalves, fish and mammals by HPLC/ICPMS. The three arsenicals DMAA, DMAE and DMAP, which occurred at microg kg(-1) concentrations, were detected in 25, 23 and 17 of the 37 samples analysed, respectively. The limits of detection were 2-3 microg kg(-1) dry mass. The data illustrate that the three compounds are common minor constituents in marine samples. This is the first report on DMAE and DMAP as naturally occurring species in marine samples. The presence of DMAA and DMAE supports a proposed biosynthesis of arsenobetaine (AB) from dimethylarsinoylribosides. Alternative proposals, which explain the presence of the compounds in marine samples, are addressed briefly in the paper.     

The chemistry of 2'' ,3''-seconucleosides II. Reactions and biological properties of 2'',3''-secopyrimidine ribonucleosides

Reaction of 2',3'-secouridine with acetone gave the 3',5'-$\text{O}$-isopropylidene derivative (1) which upon treatment with mesylchloride gave the 2'-$\text{O}$-mesyl compound (2). Replacement of the mesyl group of 2 with halide could be effected by reaction with a metal halide in DMF. The 3',5'-$\text{O}$-isopropylidene group was removed simultaneously to give a 2'-halogeno-2'-deoxy-2',3'-secouridine. 2',3'-Dichloro-2',3'-dideoxy-2',3'-secouridine upon treatment with base gave 6($\text{R}$)-chloromethyl-2($\text{R}$)-(uracil-1-yl)-1,4-dioxane in addition to O²,2'-anhydro-3'-chloro-3'-deoxy-2',3'-secouridine, as previously reported. 2',3'-Dichloro-2',3'-dideoxy-5'-0-trityl-2',3'-secouridine was converted to 2',3'-dichloro-2',3'-dideoxy-2',3'-secocytidine (16) $\text{via}$ a triazole derivative. Compound 16 was unstable and appeared to form O²,2'-anhydro-3'-chloro-3'-deoxy-2,3'-secocytidine upon standing at room temperature. 5-Vinyl- and 5-($\text{E}$) (2-bromovinyl) uridine dialdehydes have been made, as well as a number of other 5-substituted 2',3'-secouridine derivatives. None of the compounds obtained showed significant activity against a number of virus strains or tumor cell lines, except for 5-($\text{E}$)(2-bromovinyl) uridine dialdehyde, which was inhibitory to the growth of human lymphoblast (Raji, Namalva) cells at a concentration of 28 μ/ml.     

Liquid chromatographic determination of the enantiomers of ibuprofen in plasma using a chiral AGP column

A reversed-phase high-performance liquid chromatographic method has been developed for the determination of the R- and S-enantiomers of ibuprofen. The enantiomers and the internal standard 4-pentylphenylacetic acid are extracted from plasma, separated and quantified on a Chiral-AGP column using ultraviolet detection. The simplicity, sensitivity and precision of the method makes it convenient for use in pharmacokinetic studies.     

Consolidation behavior in sedimentation of TiO(2) suspensions in the presence of electrolytes

The consolidation of TiO(2) suspensions (anatase and rutile) due to gravity sedimentation in the presence of electrolytes has been investigated as a function of pH. Sodium and barium nitrate were used as flocculating electrolytes. The particle interaction was related to the zeta potential and the thickness of the electrical double layer, kappa(-1), by utilizing the repulsive barrier in the classical DLVO theory. The stability of the suspensions was represented as the average final solids content of the sediment cake, phi(fin). The batch sedimentation process was followed by scanning the sample cell with X-rays, from which the solids content and the particle size were calculated. Generally, dense sediments, with phi(fin) up to volume fractions of 0.5, were found for stable suspensions. Flocculated suspensions produced sediments with low phi(fin). The phi(fin) was observed to increase linearly with increasing repulsive barrier. However, at pH values only slightly higher than the isoelectric point (pH(iep)) the phi(fin) remained low until it returned to linearity at a pH much higher than pH(iep). This was attributed to the stronger affinity of sodium than of nitrate for the particle surface, which may be explained by the higher negative hydration energy of sodium. The stronger affinity of sodium was also shown as unsymmetrical distribution of phi(fin) around pH(iep), with stronger flocculation at pH>pH(iep). The interpretation of phi(fin) as a function of the repulsive barrier (or kappa(-1)) also made it possible to distinguish between the adsorption mechanisms of ions from solution. Addition of electrolyte at a fixed low and high pH (surface positively and negatively charged, respectively) clearly showed the specificity in adsorption and consequent flocculation of the barium ion from the indifferent nitrate. Sodium was, however, again observed to flocculate the TiO(2) suspensions slightly more strongly than nitrate.     

Bimodal proton transfer in acid-base reactions in water

We investigate one of the fundamental reactions in solutions, the neutralization of an acid by a base. We use a photoacid, 8-hydroxy-1,3,6-trisulfonate-pyrene (HPTS; pyranine), which upon photoexcitation reacts with acetate under transfer of a deuteron (solvent: deuterated water). We analyze in detail the resulting bimodal reaction dynamics between the photoacid and the base, the first report on which was recently published. We have ascribed the bimodal proton-transfer dynamics to contributions from preformed hydrogen bonding complexes and from initially uncomplexed acid and base. We report on the observation of an additional (6 ps)(-1) contribution to the reaction rate constant. As before, we analyze the slower part of the reaction within the framework of the diffusion model and the fastest part by a static, sub-150 fs reaction rate. Adding the second static term considerably improves the overall modeling of the experimental results. It also allows to connect experimentally the diffusion controlled bimolecular reaction models as defined by Eigen-Weller and by Collins-Kimball. Our findings are in agreement with a three-stage mechanism for liquid phase intermolecular proton transfer: mutual diffusion of acid and base to form a "loose" encounter complex, followed by reorganization of the solvent shells and by "tightening" of the acid-base encounter complex. These rearrangements last a few picoseconds and enable a prompt proton transfer along the reaction coordinate, which occurs faster than our time resolution of 150 fs. Alternative models for the explanation of the slower "on-contact" reaction time of the loose encounter complex in terms of proton transmission through a von Grotthuss mechanism are also discussed.