Manual and automated enrichment procedures for biological samples using lipophilic gels

Aspects of the use of lipophilic gels in manual sample preparation procedures are reviewed. Neutral gels with a controlled hydrophobicity are used for sorbent extraction of non-polar and medium polarity compounds from biological fluids. Acidic amphiphilic compounds can be extracted as ion-pairs with decyltrimethylammonium ions. Solvent or detergent extracts of tissues or faeces can be mixed with hydrophobic gels for transfer of analytes from a solvent to a gel phase, permitting subsequent sample preparation in gel bed systems. Hydrophobic gels, alkyl-bonded silica and polystyrene matrices can be used in series for extraction of compounds with a wide range of polarities. Group fractionations are performed on neutral and ion-exchanging lipophilic gels to yield fractions of neutral, basic and acidic metabolites within selected polarity ranges. Selective isolation of phenolic acids on a strong anion exchanger, of ethynylic steroids on a strong cation exchanger in silver form and of oximes of ketonic steroids on a strong cation exchanger in hydrogen form is possible. A computerized system for automatic sample preparation is also described. It consists of an extraction bed, a cation-exchange column and an anion-exchange column. The pumps and switching valves are arranged so that the columns can operate in series or parallel for isolation of neutral, basic and acidic metabolites of amphiphilic compounds and for regeneration of the column beds. Fractions can be collected, or the effluent from the column beds can be diluted with water to permit sorption on a solid phase. The applicability of the automated method to the analysis of bile acids and metabolites of mono(2-ethylhexyl) phthalate is demonstrated.     

Molybdenum-95 NMR spectra of some molybdenum carbony and related compounds

Molybdenum-95 NMR spectra have been measured for a selection of molybdenum carbonyl compounds and Mo(Σ-C₅H₅)(η-C₅H₅)(NO)(S₂CNMe₂). A chemical shift range of more than 1500 ppm is found. The chemical shifts and linewidths are discussed.     

Preparation of cyclopentadienes and diazocyclopentadienesvia cyclopentenolones and cyclopentenones

The structure and stereochemistry of the cyclopentenolones obtained by condensation of dialkyl ketones with benzil have been studied by NMR spectroscopy. These enolones were converted into cyclopentenones and cyclopentadienes. Alkyl-substituted cyclopentadienes required phenyllithium to effect their conversion by toluenesulphonyl azide into diazo-cyclopentadienes; otherwise piperidine sufficed as base catalyst.2,3,4-Triphenyldiazocyclopentadiene was simply procured by reaction of the condensation product of benzil and phenylacetone with toluenesulphonylhydrazone followed by alkali. Cyclohexyl- and methoxy-triphenylcyclopentadienes were prepared by photolytic decomposition of diazotriphenylcyclopentadiene in cyclohexane or methanol respectively.     

Synthesis and spatial structure of the geometrical isomers of 4-substituted 1-tert-butyl-3-methyl-piperidin-4-ols and 4-acyloxy-1-tert-butyl-3-methylpiperidines

In order to study the interrelationship between the structure, reactivity, and spectroscopic characteristics of the stereoisomeric piperidines, starting from 1-tert-butyl-3-methylpiperidin-4-one the synthesis has been performed of the geometric isomers of some 4-substituted 1-tert-butyl-3-methylpiperidin-4-ols and 4-acyloxy-1-tert-butyl-3-methylpiperidines. The spatial structures of the compounds obtained have been determined by IR and PMR spectroscopy.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1056–1061, August, 1973.     

Radiochemical studies of free-radical vinyl polymerizations. VI. Polymerization of methyl methacrylate in the presence of organotin PVC stabilizers

¹⁴C-Azoisobutyronitrile was used to initiate polymerizations of methyl methacrylate in the presence of the organotin compounds: tetrabutyltin, dibutyltin diacetate, dibutyltin dilaurate, dibutyltin di(ethyl mercaptide), dibutyltin di(dodecyl mercaptide), and dibutyltin dichloride. Only dibutyltin dichloride affected rates of polymerization significantly, and this was ascribed to an increase in the velocity constant k_p for the propogation reaction. No evidence was obtained for radical displacement reactions of the polymer radicals with bonds between tin and carbon, oxygen, sulfur, or chlorine. Transfer activity exhibited by the mercaptides was ascribed to traces of thiol impurity, possibly formed during storage. The relevance of these results to the mechanism of stabilization of poly(vinyl chloride) is briefly discussed.     

Die Kristallstruktur von U2Cr3Si,U4Mn5Si3 und U2Co3Si

Zusammenfassung In den Dreistoffen: Uran–T (Ti,V,Cr,Mn,Co,Nb,W)–{Si,Al} werden Legierungen auf dem Schnitt U(T,Si)₂ bzw. U(T,Al)₂ aus den Komponenten hergestellt und röntgenographisch identifiziert^*. Es bestehen die ternären Verbindungen U₂Cr₃Si, U₄Mn₅Si₃ und U₂Co₃Si, die sich als mit MgZn₂ isotyp erweisen.     

Syntheses of seven-membered rings: ruthenium-catalyzed intramolecular [5+2] cycloadditions

The Ru-catalyzed intramolecular [5+2] cycloaddition of cyclopropylenynes is investigated with respect to the regio- and diastereoselectivity as well as the functional group compatibility of the reaction. Evidence for the mechanism as occurring through a ruthenacyclopentene intermediate is elucidated from 1) the study of the diastereoselectivity of the cycloaddition; 2) the effect of variation of substituents on the regioselectivity of cyclopropyl bond cleavage in 1,2-trans- and 1,2-cis-disubstituted cyclopropanes and 3) examples that clearly do not involve ruthenacyclohexene as intermediates as products still incorporate the cyclopropyl moiety. The scope and limitations of the Ru-catalyzed cycloaddition are discussed and compared with the Rh-catalyzed reaction. The potential power of this methodology towards natural product total synthesis is demonstrated by the formation of several polycyclic systems with the chosen reaction conditions and readily available cyclopropylenyne substrates.     

Interfacial and intrafacial linkage isomerizations of rhenium complexes with aromatic molecules

The mechanisms for the interconversion of facial diastereomers of a variety of TpRe(CO)(L)(eta(2)-L(Ar)) complexes [L = (t)BuNC, pyridine (py), PMe(3), or 1-methylimidazole (MeIm); L(Ar) = benzene, anisole, naphthalene, 1-methylpyrrole, furan, or thiophene; Tp = hydridotris(pyrazolyl)borate] have been investigated by (1)H NMR spin saturation experiments. In addition, the rates and free energies of activation for these processes were calculated from spin saturation experiments and T(1) measurements. The operative mechanisms for interconversion of the pi diastereomers were found to be nondissociative, undergoing either an interfacial or intrafacial linkage isomerization. A comparison of the kinetic parameters for isomerization of related eta(2)-olefin complexes of the [TpRe(CO)(PMe(3))] and [CpRe(NO)(PPh(3))](+) fragments is also presented.     

Chlorine derivatives of octaorganylsilasesquioxanes

The chlorination of saturated and unsaturated octaorganylsilasesquioxanes proceeds through two pathways, leading to the formation of volatile and nonvolatile products, whose ratio depends on the reaction conditions. The volatile products of the chlorination of R-T₈ (R=C₂H₅ and CH=CH₂) are compounds with the general formula Cl_nR_8–n[SiO_1.5]₈, (n=1–7), obtained independently of the nature of the organic substituent and chlorinating agent. The nonvolatile chlorination products are silasesquioxanes, containing chlorine and chloroalkyl substituents on the atoms of the silicon-oxgyen core. Analysis of the vibrational spectral data indicated that the most significant changes in the molecular vibrational system are made by the halogenation of the silicon-oxygen core Si₈O₁₂.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 446–450, February, 1990.     

Neutron activation for precise nuclear data

Techniques for extracting neutron flux parameters pertaining to the irradiation positions and nuclear data pertaining to the isotopes concemed from measured reaction rates have been developed. An adjustment procedure based on the generalized least squares method with incorporates the, evaluated literature nuclear data, estimates of flux parameters and the experimentally measured reaction rates using high resolution -ray spectrometry is applied. More precise values of the nuclear data, i.e., thermal neutron cross sections, resonance integrals and -ray emission probabilities are thus generated. The irradiation of a multi-element standard (MES) containing 24 elements is carried out in six diffieret positions in two diverse types of reactor in the UK and Russia. It is shown that the improvement in nuclear data is revelaed in moire than 90% of the cases.