Tubulin rings: curved filaments with limited flexibility and two modes of association

Tubulin rings have been previously identified as composed of linear polymers of tubulin subunits, equivalent to a protofilament in the microtubule wall but in a curved rather than a straight conformation. We have examined and measured a number of different ring structures obtained under different conditions. The preferred curvature is indicated by a single ring of 380 A outside diameter. Radially double rings consist of two coplanar rings of 460 A and 350 A outside diameter, held together by a pattern of eight identical contacts between the 40 A subunits in the inner and outer rings. In some circumstances a larger ring, 570 A diameter, can be added to the outside, or a smaller ring, 240 A diameter, may be added to the inside of the radially double ring, in both cases repeating the pattern of eight radial contacts. The distortion of the filament from its relaxed 380 A diameter curvature apparently can be made without disrupting the longitudinal bond between subunits in the filament, but must be stabilized by the energy of the radial contact. All of these rings (single and radially double and triple) are observed to associate axially to form pairs or in some cases larger stacks. The radially double rings or an axially associated pair of these (quadruple ring) may also associate to form crystals. These are thin plates, up to 100 micrometers in extent and several micrometers thick which have been of limited use so far in diffraction studies because of irregularities in the packing of adjacent rings.     

Near-infrared spectroscopy of stitchtite, iowaite, desautelsite and arsenate exchanged takovite and hydrotalcite

The hydrotalcite minerals stitchtite, iowaite and desautelsite together with the arsenate exchanged takovite and arsenate exchanged hydrotalcite have been studied using near-IR reflectance spectroscopy. Each mineral has its own characteristic NIR spectrum enabling recognition of the particular hydrotalcite. As such the technique has application in the field for the analysis and identification of hydrotalcites. Hydrotalcites have proven useful as an anion exchange material. Takovite and hydrotalcite were used to exchange carbonate anions by arsenate. Three Near-IR spectral regions are identified: (a) the high wavenumber region between 6400 and 7400 cm(-1) attributed to the first overtone of the fundamental hydroxyl stretching mode, (b) the 4800-5400 cm(-1) region attributed to water combination modes of the hydroxyl fundamentals of water, and (c) the 4000-4800 cm(-1) region attributed to the combination of the stretching and deformation modes of the MOH units of the hydrotalcites. NIR spectroscopy enables the separation of the hydroxyl bands of the water and M-OH units for the hydrotalcites. Compared with the NIR spectroscopy of the structural units of the hydrotalcites namely gibbsite and brucite, the bands are broad.     

9-BBN: An amino acid protecting group for functionalization of amino acid side chains in organic solvents

9-Borabicyclononane (9-BBN) has been utilized to protect functionalized amino acids for potential chemoselective side chain manipulation. The 9-BBN group imparts organic solubility to otherwise hydrophilic molecules and is tolerant of a wide range of reaction conditions. The high degree of solubility of these molecules in THF is particularly noteworthy. It is cleaved with either aqueous HCl or by exchange with ethylenediamine in methanol. [reaction: see text]     

Thermal decomposition of natural iowaite

The thermal decomposition of natural iowaite of formula Mg₆Fe₂(Cl,(CO₃)_0.5)(OH)₁₆·4H₂O was studied by using a combination of thermogravimetry and evolved gas mass spectrometry. Thermal decomposition occurs over a number of mass loss steps at 60°C attributed to dehydration, 266 and 308°C assigned to dehydroxylation of ferric ions, at 551°C attributed to decarbonation and dehydroxylation, and 644, 703 and 761°C attributed to further dehydroxylation. The mass spectrum of carbon dioxide exhibits a maximum at 523°C. The use of TG coupled to MS shows the complexity of the thermal decomposition of iowaite. This revised version was published online in July 2006 with corrections to the Cover Date.     

Closed tube sample introduction for gas chromatography-ion mobility spectrometry analysis of water contaminated with a chemical warfare agent surrogate compound

Ion mobility spectrometry (IMS) is a proven technology for detection of vapor phase chemical warfare agents. The technology is suitable for field portable instrumentation due to its small size, high sensitivity, speed of analysis, and low power consumption. However, it suffers from a limited dynamic range and potential difficulties in identifying compounds in complex matrices. The use of gas chromatography (GC) coupled to IMS can overcome the difficulty of chemical identification in mixtures by separating the sample into individual components before detection. Using this approach, IMS technology has previously been adapted to detect biological aerosols using an open tube pyrolyzer and a short GC column (Py-GC-IMS). The open sample introduction tube of a Py-GC-IMS instrument would be a convenient configuration to accept aerosol particulates, and while viewed as needed for aerosol trapping, is not optimal for liquid chemical analyses. To examine the usefulness of an existing Py-GC-IMS system for analysis of chemicals in water, an existing open-port sample interface was replaced with a septum-equipped closed tube injector to contain analyte vapors resulting from liquid injection. Tributylphosphate (TBP) was used as a surrogate chemical warfare agent, and aqueous injections into both closed and open tube assemblies were performed. Sample introduction into the closed tube inlet was also accomplished using solid phase microextraction (SPME) preconcentration. The limit of detection for TBP using an open tube, closed tube, and closed tube configuration with SPME sample introduction was 0.980, 0.196, and 0.0098 mg/L, respectively.     

A miniaturized high-voltage integrated power supply for portable microfluidic applications

In this work a portable microfluidic device with a reusable integrated high voltage power supply is presented, which allows for quick exchange of inexpensive disposable poly(dimethylsiloxane)(PDMS) microfluidic chips on a carrier only slightly larger than a microscope slide. The device is powered by an onboard MN21 cell battery (5 mm radius, 30 mm long) and is demonstrated through the rapid and controlled transport of a fluorescent dye through an expansion chamber geometry. Power consumption experiments demonstrate the device's ability to complete over 40 dispense-flushing cycles on a single battery.     

Infrared emission spectroscopy of liquid samples with multivariate calibration as a model for process analytical applications

Infrared emission spectroscopy and multivariate calibration are used to provide a method for the quantitative analysis of liquid samples. Differing forms of the data including second derivative and interferogram representation are used for prediction of sample composition, thickness and temperature. Comparisons are made with transmission measurements of the same samples. In some situations emission measurements may be the preferred method of analysis.     

Rapid determination of radium isotopes by alpha spectrometry

An efficient analytical method for the determination of low-levels of²²⁶Ra and²²⁴Ra by alpha spectrometry is described. A cation exchange column was used to separate the analyte from other constituents in the sample (1–50 mL). After preconcentration and separation, the radium was electrodeposited onto a stainless steel disc from a solution of ammonium oxalate and hydrochloric acid. The electrodeposition was accomplished by the addition of platinum in microgram amounts. Linear responses were greater than two orders of magnitude. Detection limits of the procedure, taken as three times the standard deviation of several reagent blank analyses, were (1.8±0.3)×10^–4 Bq and (2.9±0.3)×10^–4 Bq for²²⁶Ra and²²⁴Ra, respectively. Recoveries of²²⁶Ra and²²⁴Ra ranged from 90% to 100% when samples of drinking water, well water, and dissolved bones were analyzed. Precision was calculated to be less than 5% for the determination of²²⁶Ra. Matrix effects were studied for salts of barium, magnesium, iron, and calcium.