Block copolymer micelles with dye loaded on their shells or cores

We prepared reversible micelles with dye loaded on the shells or cores by ion exchange. A poly(4-styrylmethyl triphenylphosphonium chloride)-block-polystyrene diblock copolymer prepared from poly(4-vinylbenzylchloride)-block-polystyrene and triphenylphosphine was reacted with methyl orange in a mixed solvent of benzene and acetonitrile to produce poly[4-styrylmethyl triphenylphosphonium 4-(4-dimethylamino)phenylazobenzenesulfonate]-block-polystyrene. The loading of the methyl orange on the micellar shells or cores was dependent on the composition of the mixed solvents. Dynamic light scattering demonstrated that the loading of the dye on the cores significantly expanded the micelles when compared to that on the shells. The loading of the dye on the cores shifted the UV wavelength of the methyl orange, whereas that on the shells produced no changes in the UV wavelength. Transmission electron microscopy confirmed the formation of the spherical micelles.     

Synthesis of polystyrene microspheres by dispersion polymerization in supercritical carbon dioxide using a poly(dimethylsiloxane)-based macroazoinitiator

The synthesis of polystyrene microspheres was achieved by the dispersion polymerization of styrene in supercritical carbon dioxide using azobisisobutylonitrile (AIBN) and a poly(dimethylsiloxane) (PDMS)-based macroazoinitiator, VPS-1001. VPS-1001 contained seven to nine molecules of the azo groups and the PDMS blocks with a molecular weight of 10,000 per molecule. The polymerization in the presence of both VPS-1001 and AIBN produced polystyrene microspheres with a diameter below 4 μm in over 85% yields, whereas the polymerization with VPS-1001 in the absence of AIBN provided a nonspecific polystyrene in only 20% yield. The particle size decreased as a result of increasing the concentration of VPS-1001. It was confirmed that the polystyrene particles were stabilized by the PDMS-block-polystyrene formed through the polymerization initiated by VPS-1001 because the polymerization using a PDMS homopolymer provided nonspecific polystyrene as a precipitate during the polymerization.     

Selective linear triene formation from different alkynes using Zr/Cu system

Selective synthesis of linear trienes from three different alkynes was achieved in one-pot procedure using the Zr/Cu system. Zirconacyclopentadiene prepared from two different alkynes such as an alkyl-substituted alkyne and an aryl-substituted alkyne reacted with NCS gave chlorodienylzirconocene. It reacted with the third alkyne with electron-withdrawing groups in the presence of CuCl to afford the corresponding linear triene.     

A Programmable Signaling Molecular Recognition Nanocavity Prepared by Molecular Imprinting and Post‐Imprinting Modifications

Inspired by biosystems, a process is proposed for preparing next‐generation artificial polymer receptors with molecular recognition abilities capable of programmable site‐directed modification following construction of nanocavities to provide multi‐functionality. The proposed strategy involves strictly regulated multi‐step chemical modifications: 1) fabrication of scaffolds by molecular imprinting for use as molecular recognition fields possessing reactive sites for further modifications at pre‐determined positions, and 2) conjugation of appropriate functional groups with the reactive sites by post‐imprinting modifications to develop programmed functionalizations designed prior to polymerization, allowing independent introduction of multiple functional groups. The proposed strategy holds promise as a reliable, affordable, and versatile approach, facilitating the emergence of polymer‐based artificial antibodies bearing desirable functions that are beyond those of natural antibodies.     

Comparison of the cytotoxic effect of polystyrene latex nanoparticles on planktonic cells and bacterial biofilms

The cytotoxic effect of positively charged polystyrene latex nanoparticles (PSL NPs) was compared between planktonic bacterial cells and bacterial biofilms using confocal laser scanning microscopy, atomic force microscopy, and a colony counting method. Pseudomonas fluorescens, which is commonly used in biofilm studies, was employed as the model bacteria. We found that the negatively charged bacterial surface of the planktonic cells was almost completely covered with positively charged PSL NPs, leading to cell death, as indicated by the NP concentration being greater than that required to achieve single layer coverage. In addition, the relationship between surface coverage and cell viability of P. fluorescens cells correlated well with the findings in other bacterial cells (Escherichia coli and Lactococcus lactis). However, most of the bacterial cells that formed the biofilm were viable despite the positively charged PSL NPs being highly toxic to planktonic bacterial cells. This indicated that bacterial cells embedded in the biofilm were protected by self-produced extracellular polymeric substances (EPS) that provide resistance to antibacterial agents. In conclusion, mature biofilms covered with EPS exhibit resistance to NP toxicity as well as antibacterial agents.     

Simultaneous determination of phosphonate, phosphate, and diphosphate by capillary electrophoresis using in-capillary complexation with Mo(VI)

This study describes the simultaneous determination of phosphonate, phosphate, and diphosphate by CE with direct UV detection, based on in-capillary complexation with Mo(VI). When a mixture of phosphonate, phosphate, and diphosphate was injected into a capillary containing 3.0 mM Mo(VI), 0.05 M malonate buffer (pH 3.0) and 45% v/v CH3CN, three well-defined peaks, due to the migration of the corresponding polyoxomolybdate anions, were separated. The respective calibration graphs were linear in the concentration range of 2 x 10(-6)-2 x 10(-4) M for phosphonate, 1 x 10(-6)-5 x 10(-5) M for phosphate, and 1 x 10(-6)-2 x 10(-4) M for diphosphate; the correlation coefficients were better than 0.9990. The present CE method is successfully applied to the simultaneous determination of phosphonate, phosphate, and diphosphate in tap water.     

Identification of the origin of chondroitin sulfate in "health foods"

Twelve "health foods" products containing chondroitin sulfate (CS) were purchased from the Japanese market and the origin of the CS was investigated by conducting disaccharide compositional analysis after enzymatic depolymerization and by 1H-NMR spectroscopy. Nine of the 12 products had labels indicating that the origin of the CS was shark cartilage. However, two of them were found to contain mammalian CS. Next, we compared the ratio of the sulfate group to the galactosamine residue after the acid hydrolysis of CS. The results suggest that all of the CS from sharks had a ratio of more than 1.0, while the CS from mammals had a ratio of less than 1.0. Since this comparative analysis does not require expensive purified enzyme, it would be an economical way to identify the origin of CS in "health foods." Being able to determine the origin of the ingredients in natural products is very important for ensuring their quality, safety, and efficacy. Therefore, we think that regulatory requirements for accurately indicating the origin of "health foods" and effective enforcement of these requirements are needed.     

Synthesis of branched oligonucleotides with three different sequences using an oxidatively removable tritylthio group

We synthesized a three-way branched oligodeoxynucleotide (ODN) 30-mer using a new branch unit with acid-labile DMTr and oxidatively cleavable TrS groups as orthogonal protecting groups. The branched ODN was successfully synthesized using 5-[3,5-bis(trifluoromethyl)phenyl]-1H-tetrazole and (2R,8aS)-(+)-(camphorylsulfonyl)oxaziridine as the activator of phosphoramidite units and the oxidizing reagent, respectively. We also found that the TrS group was orthogonal to the Lev, TBDMS, and Fmoc groups. These results indicate the possibility of the synthesis of more complex four- and five-way branched ODNs by the combined use of DMTr, TrS, Lev, TBDMS, and Fmoc groups.     

Study of temperature-responsibility on the surfaces of a thermo-responsive polymer modified stationary phase

We investigated a thermo-sensitive polymer, poly(N-isopropylacrylamide) (PNIPAAm), which is the basis of an HPLC stationary phase. We prepared a PNIPAAm terminally-modified surface. In this study, we investigated the effect of PNIPAAm on the surface of a stationary phase on separation based on changes of the retention time with the temperature step gradient. As the temperature changed the surface property of the stationary phase switched from hydrophilic to hydrophobic. The retention on the polymer-modified stationary phase remarkably changed upon changing the temperature. Using a column packed with PNIPAAm-modified silica, the separation of steroids was carried out by changing the temperature. With increasing temperature, an increased interaction between solutes and PNIPAAm-grafted surfaces of the stationary phases was observed. A temperature-dependent resolution of steroids was achieved using only water as a mobile phase. The PNIPAAm-modified surface of the stationary phase exhibited temperature-controlled hydrophilic-hydrophobic changes. The drastic and reversible surface hydrophilic-hydrophobic property alteration for PNIPAAm terminally-grafted surfaces should be due to rapid changes in the polymer hydration state around the polymer's transition temperature. A solvent gradient elution-like effect could be achieved with a single mobile phase by programmed temperature changes during chromatographic runs. This system should be highly useful to control the function and property of the stationary phase for HPLC only by changing the temperature with an aqueous solvent.