Synthesis and Metal Ion Recognition Properties of a Novel Chiral Calix[4](azoxa)crown-7

A novel chiral calix[4](azoxa)crown-7 (9) has been synthesized and its metal ion recognition properties investigated. The starting reagents, chiral diamine 5 and calix[4]arene diacid chloride derivative 8, were prepared according to literature methods. ¹H and ¹³C NMR data show that 9 exists in a cone conformation. In liquid–liquid extraction experiments, 9 exhibits selectivity for Li⁺ among the other alkali metals and a good extraction ability for transition metal cations, suggesting its potential use in different fields, such as a sensor for ions as well as for chiral molecules.     

Preconcentration of cobalt using Amberlyst 36 as a solid-phase extractor and its determination in various environmental samples by flame atomic absorption spectrometry

A new and simple column-solid-phase extraction method has been developed to separate and preconcentrate trace cobalt in water and soil prior to its determination by flame atomic absorption spectrometry (FAAS). Different factors such as pH of sample solution, sample volume, amount of resin, flow rate of aqueous solution, volume and concentration of eluent, and matrix effects for preconcentration were optimized. Under optimized experimentally established conditions, an analytical detection limit of 0.44?µg?L^?1, precision (RSD) of 1.9%, enrichment factor of 200, and capacity of resin of 82?mg?g^?1 were obtained. The method was applied for cobalt determination by FAAS in tap water, natural drinking water, soil, and roadside dust samples. The accuracy of the method is confirmed by analysing standard reference material (Montana Soil, SRM 2711).     

Optimization of Electrical Conductivity of SA-graphene Nanocomposites Using Response Surface Methodology

Synthesis and characterization of 4-{(E)-[(5-bromo-2-hydroxyphenyl)methylidene]amino}-N-carbamimidoylbenzene-1-sulfonamide(SA) and its composites with graphene(SA-GF) were performed. Compound SA and SA-GF were characterized by FTIR and ¹H NMR. The GF dispersion in the composites was analyzed by means of scanning electron microscopy(SEM) for morphology. Thermal properties of SA and nanocomposites were investigated using differential thermal analysis(DTA) and thermogravimetric analysis(TGA). The optimum electrical conductivity of the new sulfonamide-based Schiff base was determined to be 1.78×10^–5 S/cm at a frequency of 9923 Hz, an applied voltage of –19 V, a mass fraction of 9.38% for graphene loading using a central composite design in the response surface methodology. The significance of the selected parameters(frequency, voltage and GF amount) in the model was determined by the analysis of variance(ANOVA). The results showed that frequency and graphene loading represent important model terms and have considerable effects on the conductivity of SA.     

Electrochemical Biosensor Design with Multi-walled Carbon Nanotube to Display DNA-Schiff Base Interaction

This paper demonstrates a Schiff base i. e. 5-(diethylamino)-2-((2,6-diethylphenylimino)methyl)phenol (5-DDMP) that was sensed by DNA biosensor. dsDNA was immobilized onto GCE modified with functionalized multi-walled carbon nanotubes to prepare a biosensor. The efficiency of dsDNA biosensor was determined and binding of 5-DDMP with dsDNA was searched by UV-vis spectrophotometry and differential pulse voltammetry. Molecular docking simulations between 5-DDMP and dsDNA were explored and as a result, a hydrogen bond and a π-π contact were observed between 5-DDMP and deoxyguanosine base (dG22) of the strand B, deoxyadenosine base (dA5) of the strand A, respectively. These studies could be useful for new anticancer drug design and development.     

Ultrasound-assisted ozone bleaching of cotton

In this study, the effects of ultrasound on ozone treatment processes for bleaching cotton fabrics were investigated and compared with the conventional hydrogen peroxide bleaching process (60 °C over 90 min). Two ultrasonic + ozone treatments of cotton fabric samples were carried out: (1) ozone in an ultrasonic homogenizer (UH) and (2) ozone in an ultrasonic bath. Ozone dosages, temperature and time variations were determined with both ozone-ultrasonic bleaching processes. Whiteness, yellowness, weight, tensile strength properties, FTIR (ATR) spectra and visual appearance, via scanning electron microscopy of treated cotton fabrics as well as chemical oxygen demand (COD) of bleaching effluents, were investigated. It was concluded that the ozone + UH process, conducted for 30 min at 30 °C, produced closely equivalent values of cotton fabric whiteness and yellowness to the classic peroxide bleaching process, with slightly less weight loss, dramatically less COD in the process effluent (29 mg/l for ozone-UH vs. 4,316 mg/l for classical peroxide treatment), and without causing any adverse and/or detrimental effects on loss of fabric strength or elongation of the cotton fabrics. The ozone-UH process also leads to time and energy savings with much less environmental impact. Consequently, the combination of ozonation plus UH carried out at 30 °C over 30 min can be used successfully for cotton bleaching instead of the classic hydrogen peroxide bleaching process.     

Chemometric approach to the optimisation of LC-FL and GC-MS methods for the determination of nitrite and nitrate in some biological,food and environmental samples

Gas chromatography–mass spectrometry (GC-MS) method and a liquid chromatography–fluorescence (LC-FL) detection method using experimental design and optimisation approach were improved for the quantitative determination of nitrite and nitrate in biological, food and environmental samples. The obtained recoveries of nitrite and nitrate ions from samples based on both GC-MS and LC-FL results ranged from 98.5% to 98.9% for nitrite and 97.9% to 98.4% for nitrate. The precision of these methods, as indicated by the relative standard deviations (RSDs), was within the range from 2.4% to 3.6% for nitrite and 2.5% to 3.8% for nitrate, respectively. The limits of detection of nitrite and nitrate ions from samples based on GC-MS and LC-FL results ranged from 0.01 to 0.14 ng L^?1 for nitrite and 0.02 to 0.71 ng L^?1 for nitrate, respectively. The optimised isolation procedure by central composite design was successfully applied to real samples. The results revealed that the proposed procedure combined with GC-MS and LC-FL techniques is more sensitive, reliable and selective compared to the other methods available for the precise determination of trace levels of nitrite and nitrate in biological, food and environmental samples.     

Some Solutions for a Class of Singular Equations

In this paper we obtain all solutions which depend only on r for a class of partial differential equations of higher order with singular coefficients.     

A new efficient presentation for PSL(2,5) and the structure of the groups G(3,m,n)

G(3, m, n) is the group presented by . In this paper, we study the structure of G(3, m, n). We also give a new efficient presentation for the Projective Special Linear group PSL(2, 5) and in particular we prove that PSL(2, 5) is isomorphic to G(3, m, n) under certain conditions.     

5,6‐Di­phenyl­thieno­[2,3‐d][1,3]dithiole‐2‐thione

The title compound, C₁₇H₁₀S₄, has two independent mol­ecules in the asymmetric unit. In both mol­ecules, the fused heterocycle is almost planar and the phenyl groups make dihedral angles of 42.88 (9) and 52.79 (8)° with the fused heterocycle in one mol­ecule, and angles of 40.62 (9) and 52.28 (8)° in the other. The crystal packing is governed by short intermolecular S?S interactions, the shortest contact being 3.333 (1) Å.     

Backtracking and exchange of information: Methods to enhance a beam search algorithm for assembly line scheduling

Beam search (BS) is used as a heuristic to solve various combinatorial optimization problems, ranging from scheduling to assembly line balancing. In this paper, we develop a backtracking and an exchange-of-information (EOI) procedure to enhance the traditional beam search method. The backtracking enables us to return to previous solution states in the search process with the expectation of obtaining better solutions. The EOI is used to transfer information accumulated in a beam to other beams to yield improved solutions.