Preparation of enantiomerically pure (R)-2-butyryloxymethylglycidol by lipase-catalyzed asymmetric hydrolysis

Optically active epoxy alcohol, (R)-2-butyryloxymethylglycidol3 which is the precursor of a tert-alcohol chiral building block was obtained in high enantiomeric purity, 98.7% e.e., by lipase-catalyzed asymmetric hydrolysis using a phosphate buffer and organic co-solvent system in 95% of chemical yield.     

金属羰基化合物（CpFe（CO）2）2与金属氧化物表面作用的傅里叶变…

用漫反射红外光谱和光声红外光谱研究了金属羰基化合物（ＣｐＦｅ（ＣＯ）２）２Ｃｐ＝η＾５－Ｃ５Ｈ５与酸性，中性和碱性Ａｌ２Ｏ３及ＴｉＯ２的相互作用，结果表明，在Ａｌ２Ｏ３表面生成的洗生物种类及浓度与Ａｌ２Ｏ３的酸碱度明显相关，在酸性Ａｌ２Ｏ３表面，主要存在衍生物（ＣｐＦｅ（ＣＯ）２Ｆｅ－Ｈ－Ｆｅ（ＣＯ２Ｃｐ）＾＋及少量的ＣｐＦｅ（ＣＯ）２（－Ｏ－）；在中性Ａｌ２Ｏ３表面存在的ＣｐＦｅ（ＣＯ）２（－Ｏ     

α－萘甲酰呋喃甲酰甲烷的合成及谱学性质的研究

本文用Ｃｌａｉｓｅｎ缩合反应合成了未见文献报道的一种新的β－二酮，α－萘甲酰呋喃甲酰甲烷（α－ＮＦＭ），考察了该化合物的红外光谱、质谱及核磁共振氢谱。确定其存在着互变异构。     

Analysis of the Coaxial Ridge-Loaded Helical Groove Waveguide

The coaxial ridge-loaded helical groove waveguide is proposed in this paper. As an all-metal slow-wave circuit, it has advantages of good heat dissipation and great size, and thus is suitable for use of millimeter TWT. By means of field theory, the expressions of the dispersion equation and the coupling impedance of the coaxial ridge-loaded helical groove waveguide are obtained. The influence of various circuit dimensions on the dispersion relation and the coupling impedance is investigated by the results of numerical computation.     

Effects of electron-interface-phonon interactions on interactions between electrons in double-heterostructures

Effects of electron-interface-phonon interaction on the interaction between electrons in double heterostructures are considered. It is found that the interaction potential between electrons caused by each of four interface-phonon modes is different. For electrons moving at the two interfaces of double heterostructure, the interaction energies of the electrons produced by the interaction with antisymmetric modes are positive which indicate that the forces between electrons are repulsive. The interaction energies caused by interaction with symmetric modes are negative and the forces are attractive. The resultant of the forces are attractive and become larger when the width of potential barrier decreases for InAs/GaSb/InAs double heterostructure.     

高动态范围微通道板

导出微通道板动态范围的表达式,给出提高动态范围的几种可行途径,简要介绍一种高动态范围微通道板的主要特性。     

Independent cycles with limited size in a graph

Letk and s be two positive integers with s≥3. LetG be a graph of ordern ≥sk. Writen =qk + r, 0 ≤r ≤k - 1. Suppose thatG has minimum degree at least (s - l)k. Then G containsk independent cyclesC ₁,C ₂,...,C _k such thats ≤l(C _i ) ≤q for 1 ≤i ≤r arnds ≤l(C _i ) ≤q + 1 fork -r <i ≤k, where l(C_i) denotes the length ofC _i .     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

A nodal coupling of finite and boundary elements

This article presents and analyzes a simple method for the exterior Laplace equation through the coupling of finite and boundary element methods. The main novelty is the use of a smooth parametric artificial boundary where boundary elements fit without effort together with a straight approximate triangulation in the bounded area, with the coupling done only in nodes. A numerically integrated version of the algorithm is also analyzed. Finally, an isoparametric variant with higher order is proposed. © 2003 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 19: 555–570, 2003