Die IR-Spektren von NH4UO2AsO4·3H2O und NH4UO2PO4·3H2O

The infrared spectra of the title compounds, as well as that of the structurally related mineral meta-autunite, [Ca(UO₂)₂(PO₄)₂·n H₂O], are reported and discussed using the available crystallographic data. The results can be considered as representative for the full group of the so-called torbernite-minerals.     

New strategy for the determination of gliadins in maize- or rice-based foods matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: fractionation of gliadins from maize or rice prolamins by acidic treatment

A procedure for determining small quantities of gliadins by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) in gluten-free foods containing relatively large amounts of prolamin proteins from maize or rice is described. We report for the first time that gliadins, the ethanol-soluble wheat prolamin fraction, can be quantitatively solubilized in 1.0 M acetic acid, while the corresponding ethanol-soluble maize or rice prolamin fraction remains insoluble in acetic acid. We describe a methodology for the detection of gliadins in maize and rice foods based on a two-step procedure of extraction (60% aqueous ethanol followed by 1 M acetic acid). Subsequent MALDI-TOFMS analysis of the resulting acidic extract from these gluten-free foods clearly confirms the presence of a typical mass pattern corresponding to gliadin components, ranging from 30 to 45 kDa. Depending on the percentages of maize or rice flours employed in the elaboration of these foods, the combined procedure enables levels of gliadins from 100 to 400 ppm to be detected. The efficiency of this combined procedure corroborates enzyme-linked immunosorbent assay data for a large number of maize/rice gluten-free foods by means of direct visualization of the characteristic gliadin mass pattern in maize or rice foods.     

Synthesis of 1,2-di-(4-pyridyl)ethylenediamine and related compounds

Hydrolysis of N,N'-diacyl-1,2-di(4-pyridyl)ethylenediamines 1 in aqueous sulfuric acid gave the corresponding imidazolines 3. 1,2-Di-(4-pyridyl)ethylenediamine 2 was prepared in 61 % yield by treating N,N'-di-t-butyl-oxycarbonyl-1,2-di(4-pyridyl)ethylenediamine 4 with trifluoroacetic acid or in 94% yield by the hydrolysis under basic conditions of N,N'-diphthaloylglycyl-1,2-di(4-pyridy)ethylenediamine 13.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Dual Nucleophilic Substitution Reactions of O,O‐Diethyl 2,4‐dinitrophenyl Phosphate and Thionophosphate Triesters

The reactions of the title compounds with phenoxides, secondary alicyclic (SA) amines, and pyridines, in 44 wt% ethanol–water, at 25°C and an ionic strength of 0.2 M, were subjected to kinetic and product studies. From analytical techniques (HPLC and NMR), two pathways were detected (nucleophilic attack at the phosphoryl center and at the C‐1 aromatic carbon) for the reactions of all the nucleophiles with the phosphate ( 2 ) and for the pyridinolysis of the thionophosphate ( 1 ). Only aromatic nucleophilic substitution was found for the reactions of 1 with phenoxides and SA amines. For the dual reactions, the nucleophilic rate constants (k_N) were separated in two terms: $k_{\rm N}^{\rm P}$ and $k_{\rm N}^{{\rm Ar}}$, which are the rate constants for the corresponding electrophilic centers. The absence of a break in the Brønsted‐type plots for the attack at P is consistent with concerted mechanisms. The Brønsted slopes, β_Ar 0.32–0.71, for the attack at the aromatic C‐1, are in agreement with stepwise mechanisms where formation of a Meisenheimer complex is the rate‐determining step. © 2013 Wiley Periodicals, Inc. Int J Chem Kinet 45: 202–211, 2013     

The Effect of Auxiliary Nitrogenated Linkers on the Design of New Cadmium-Based Coordination Polymers as Sensors for the Detection of Explosive Materials

Three new cadmium-based coordination polymers, denoted [Cd(hfipbb)(4,4’-bipy)] ( CdPF-1 ), [Cd(hfipbb)(2,2’-bipy)] ( CdPF-2 ), and [Cd(hfipbb)(1,10-phen)] ( CdPF-3 ), have been hydrothermally synthesized by using the well-known V-shaped organic linker 4,4’-(hexafluoroisopropylidene)bis(benzoic acid) (H₂hfipbb), together with different nitrogenated auxiliary linkers. Considering the d¹⁰ configuration of the transition metal selected, the luminescent properties for these CdPF-n materials were explored, finding that materials CdPF-2 and CdPF-3 act as excellent sensors in the detection of explosive nitro aromatic compounds. The photoluminescence properties of CdPF-2 and CdPF-3 revealed that significant and sensitive fluorescence quenching was observed toward NP (nitrophenol) for CdPF-2 and PA (picric acid) for CdPF-3 in MeOH suspensions.     

Automatic generation of linear programming problems for computer aided instruction

The paper presents a method for generating random linear programming problems with a previously selected type of solution. The user can choose a problem whose solution is unbounded, bounded for minima, maxima or both, unique or multiple, with given structure, at wish. Initially, the feasible solution of the LPP is generated as the sum of a linear space, a cone, and a polytope, depending on the desired properties of the solution. With the aim of obtaining a simple set of constraints, the generators of these three structures are selected as random vectors with integer simple components, the range of which can be given. Next, an objective function that satisfies the required conditions, i.e. leads to a solution of the desired type, is obtained. The generating algorithms have been implemented in Mathematica and some illustrative examples are given to clarify the generation process. With this tool, a LPP can be generated, according to the instructor requirements, where this is a human or an expert system. They can control student progress and generate a sequence of problems covering all possible cases, in steps of increasing difficulty. Combining this tool with another (also produced by the same authors) that solves the problems and explains the whole process, step by step, a computer aided module for learning LPP, which is completely autonomous, can be easily obtained.     

A meshless finite point method for three‐dimensional analysis of compressible flow problems involving moving boundaries and adaptivity

A finite point method for solving compressible flow problems involving moving boundaries and adaptivity is presented. The numerical methodology is based on an upwind‐biased discretization of the Euler equations, written in arbitrary Lagrangian–Eulerian form and integrated in time by means of a dual‐time steeping technique. In order to exploit the meshless potential of the method, a domain deformation approach based on the spring network analogy is implemented, and h‐adaptivity is also employed in the computations. Typical movable boundary problems in transonic flow regime are solved to assess the performance of the proposed technique. In addition, an application to a fluid–structure interaction problem involving static aeroelasticity illustrates the capability of the method to deal with practical engineering analyses. The computational cost and multi‐core performance of the proposed technique is also discussed through the examples provided. Copyright © 2013 John Wiley & Sons, Ltd.