Capillary zone electrophoresis for analysis of phytochelatins and other thiol peptides in complex biological samples derivatized with monobromobimane

A new method to improve the analysis of phytochelatins and their precursors (cysteine, gamma-Glu-Cys, and glutathione) derivatized with monobromobimane (mBrB) in complex biological samples by capillary zone electrophoresis is described. The effects of the background electrolyte pH, concentration, and different organic additives (acetonitrile, methanol, and trifluoroethanol) on the separation were studied to achieve optimum resolution and number of theoretical plates of the analyzed compounds in the electropherograms. Optimum separation of the thiol peptides was obtained with 150 mM phosphate buffer at pH 1.60. Separation efficiency was improved when 2.5% v/v methanol was added to the background electrolyte. The electrophoretic conditions were 13 kV and capillary dimensions with 30 cm length from the inlet to the detector (38 cm total length) and 50 microm inner diameter. The injection was by pressure at 50 mbar for 17 s. Under these conditions, the separation between desglycyl-peptides and phytochelatins was also achieved. We also describe the optimum conditions for the derivatization of biological samples with mBrB to increase electrophoretic sensitivity and number of theoretical plates. The improved method was shown to be simple, reproducible, selective, and accurate in measuring thiol peptides in complex biological samples, the detection limit being 2.5 microM glutathione at a wavelength of 390 nm.     

Biotransformation of (−)β-pinene by Aspergillus niger ATCC 9642

The main objective of this work was to investigate the biotransformations of (−)α-pinene, (−)β-pinene, and (+) limonene by Aspergillus niger ATCC 9642. The culture conditions involved—concentration of cosolvent (EtOH), substrate applied, and sequential addition of substrates—were investigated. Adaptation of the precultures with small amounts of substrate was also studied. The experiments were performed in conical flasks with liquid cultures. This strain of A. niger was able to convert only (−)β-pinene into α-terpineol. An optimum conversion of (−)β-pinene into α-terpineol of about 4% was obtained when the substrate was applied as a diluted solution in EtOH and sequential addition of substrate was used.     

Spectroscopic characterization of halogen- and cyano-substituted pyridinevinylenes synthesized without catalyst or solvent

An efficient Knoevenagel route using green chemistry conditions was applied for the synthesis of halogen- and cyano- substituted pyridinevinylene compounds. Absorption and fluorescence emission spectra of these conjugated compounds were recorded and compared in order to evaluate the effect of substituents on the electronic properties of pyridinevinylene compounds. The substituents studied were terminal Cl and F, two or three aromatic rings, as well as a cyano group attached to a C=C double bond. The compounds synthesized are: (E)-2-(4-fluorostyryl)pyridine, (E)-2-(4-chlorostyryl)pyridine, (E)-4-(4-chlorostyryl)pyridine, 2,3-diphenylacrylonitrile, 3-phenyl-2-(pyridin-2-yl)acrylonitrile, 3-phenyl-2-(pyridin-3-yl)acrylonitrile, 2-phenyl-3-(pyridin-2-yl)acrylonitrile, 3,3′-(1,4-phenylene)bis(2-phenylacrylonitrile), 3,3′-(1,4-phenylene)bis(2-(pyridin-2-yl)acrylonitrile), and 3,3′-(1,4-phenylene)bis(2-(pyridin-3-yl)acrylonitrile). The solvent-free method used in this work allows obtaining each compound by controlling the reaction temperature. The compounds were characterized by infrared spectroscopy and 1H-NMR spectroscopy.     

Hierarchical Functionalized Polymeric‐Ceramic Coatings on Mg‐Ca Alloys for Biodegradable Implant Applications

Magnesium‐based implants present several advantages for clinical applications, in particular due to their biocompatibility and degradability. However, degradation products can affect negatively the cell activity. In this work, a combined coating strategy to control the implant degradation and cell regulation processes is evaluated, including plasma electrolytic oxidation (PEO) that produces a 13 µm‐thick Ca, P, and Si containing ceramic coating with surface porosity, and breath figures (BF) approach that produces a porous polymeric poly(ε‐caprolactone) surface. The degradation of PCL‐PEO‐coated Mg hierarchical scaffold can be tailored to promote cell adhesion and proliferation into the porous structure. As a result, cell culture can colonize the inner PEO‐ceramic coating structure where higher amount of bioelements are present. The Mg/PEO/PCL/BF scaffolds exhibit equally good or better premyoblast cell adhesion and proliferation compared with Ti CP control. The biological behavior of this new hierarchical functionalized scaffold can improve the implantation success in bone and cardiovascular clinical applications.     

Impact of Molecular Size and Shape on the Supramolecular Co-Assembly of Chiral Tricarboxamides: A Comparative Study

A comparative investigation of the chiral amplification features of a series of three families of C₃-symmetric tricarboxamides, 1,3,5-triphenylbenzenetricarboxamides (TPBAs), benzenetricarboxamides (BTAs) and oligo(phenylene ethynylene) tricarboxamides (OPE-TAs), is here reported. As previously observed for BTAs and OPE-TAs, a similar dichroic response is obtained for TPBAs decorated with one, two or three chiral side chains bearing stereogenic centers, thus confirming the efficient transfer of point chirality to the supramolecular helical aggregates. Unlike BTAs and OPE-TAs, the chiral amplification ability of TPBAs in majority rules experiments shows a negligible dependence on the number of chiral centers per monomeric unit, and stands the largest among the series of tricarboxamides. Detailed experimental and theoretical studies demonstrate that the rotation angle between the TPBA units in the helical stack is intermediate to that observed for BTAs and OPE-TAs. This feature strongly conditions the steric interactions between vicinal molecules in the stack and the final chiral amplification outcome. Furthermore, theoretical calculations show that achiral side chains favor the interdigitation of the helical aggregates and thereby the formation of bundle superstructures.     

Size and diffusion effects on the oxidation of formic acid and ethanol on platinum nanoparticles

Formic acid and ethanol oxidations on spherical platinum nanoparticles dispersed on carbon with different loadings have been studied. The increasing loading of the catalyst leads to a lower diffusion flux of reactants in the internal parts of the catalyst layer, resulting in a lower apparent activity. In some cases, as in ethanol oxidation, it may also affect the diffusion of the products. As a practical consequence, the structure of the supporting layer and the catalyst loading should be optimized so that the maximum catalyst utilization is obtained. Finally, these diffusion effects may mask some important catalytic activity increase of the nanoparticles. In the case of formic acid, a significant increase in the activity is obtained for very small nanoparticles.     

Studies on Immobilization and Partial Characterization of Lipases from Wheat Seeds (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

The objective of this study was to provide some features on immobilization and partial characterization of lipases from wheat seeds. The optimum pH and temperature were found to be 5.5 and 32–37 °C, respectively. The stability of the concentrated enzymatic extract to high temperatures (25, 35, 45, and 55 °C) showed that the incubation of the extract at 55 °C led to its complete inactivation. The concentrated enzymatic extract kept 90% of its hydrolytic and esterification activities until 70 and 40 days of storage at 4 °C, respectively. The extract presented higher hydrolytic specificity to substrates of medium and long chains and higher esterification affinity to fatty acids of short and medium chains and alcohols with two and three carbon atoms. After the immobilization process using activated coal and sodium alginate as supports, an enhancement of about threefold in lipase activity was observed. The development of the present work permitted us to point out some characteristics of lipases from wheat seeds necessary for the proposition of new future industrial applications for this important biocatalyst.     

New strategy for the determination of gliadins in maize- or rice-based foods matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: fractionation of gliadins from maize or rice prolamins by acidic treatment

A procedure for determining small quantities of gliadins by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) in gluten-free foods containing relatively large amounts of prolamin proteins from maize or rice is described. We report for the first time that gliadins, the ethanol-soluble wheat prolamin fraction, can be quantitatively solubilized in 1.0 M acetic acid, while the corresponding ethanol-soluble maize or rice prolamin fraction remains insoluble in acetic acid. We describe a methodology for the detection of gliadins in maize and rice foods based on a two-step procedure of extraction (60% aqueous ethanol followed by 1 M acetic acid). Subsequent MALDI-TOFMS analysis of the resulting acidic extract from these gluten-free foods clearly confirms the presence of a typical mass pattern corresponding to gliadin components, ranging from 30 to 45 kDa. Depending on the percentages of maize or rice flours employed in the elaboration of these foods, the combined procedure enables levels of gliadins from 100 to 400 ppm to be detected. The efficiency of this combined procedure corroborates enzyme-linked immunosorbent assay data for a large number of maize/rice gluten-free foods by means of direct visualization of the characteristic gliadin mass pattern in maize or rice foods.     

The molecular structure of 2-methylbenzotriazole (2MeBzTr) in connection with the x-ray structure of 2MeBzTr.HBF4.H2O

The fluoroborate of 1H-2-methylbenzotriazolium monohydrate crystallizes in the Pbca space group [Z = 8, a = 16.734(3), b = 19.153(9), c = 6.937(1) Å], The hydrogen bond network between the three molecules, 2MeBzTr, HBF₄ and H₂O, corresponds to a situation intermediate between the fluoroborate of a protonated benzotriazole (BF4^?.2MeBzTrH⁺) and a neutral benzotriazole hydrogen-bonded to fluoroboric acid (HBF₄,2MeBzTr). The behaviour of the title compound in solution is also intermediate between these two extreme situations. Thus, the present compound is one of the rare examples of a proton solvated only by very weak hydrogen bond acceptors.     

Gold‐Catalyzed 1,2‐/1,2‐Bis‐acetoxy Migration of 1,4‐Bis‐propargyl Acetates: A Mechanistic Study

The late transition metal catalyzed rearrangement of propargyl acetates offers an interesting platform for the development of synthetically useful transformations. We have recently shown that gold complexes can catalyze a highly selective tandem 1,2‐/1,2‐bis‐acetoxy migration in 1,4‐bis‐propargyl acetates to form 2,3‐bis‐acetoxy‐1,3‐dienes. In this way, (1Z,3Z)‐ or (1Z,3E)‐ and (1E,3Z)‐1,3‐dienes could be obtained in a stereocontrolled manner depending on the electronic and steric features of the ancillary ligand bound to gold and the substituents at the propargylic positions. In this work, we report an experimental study on the scope of this transformation, plus a detailed theoretical examination of the reaction mechanism, which has revealed the key features responsible for the reaction stereoselectivity. Synthetic applications towards the one‐pot synthesis of quinoxaline heterocycles and tandem Diels–Alder processes have also been devised.