Minicolumn field sampling--preconcentration of trace zinc from seawater and its laboratory detection by flow injection flame atomic absorption spectrometry.

A simple field sampling-preconcentration method for zinc determination in seawater is described. Seawater was collected in situ by pumping it through a minicolumn packed with a chelating resin (Chelite P) connected to a field flow preconcentration system (FFPS). These packed minicolumns retain the dissolved zinc, and once are loaded with the analyte, they are returned to the laboratory where they are sequentially inserted into a flow injection system for on-line zinc elution with diluted hydrochloric acid and flame atomic absorption spectrometric detection. A factorial design has been used to optimize the FFPS and the flow injection elution process. The proposed method has a linear calibration range from 0.07 to at least 9.4 microg L(-1) of zinc, with a detection limit of 0.02 microg L(-1) and a throughput of 26 samples h(-1). Validation was carried out against certified reference water samples. This procedure has been successfully applied to the determination of Zn in seawater samples from Galicia (Spain).     

Volumetric and refractive properties of binary mixtures containing 1,3-dioxolane and isomeric chlorobutanes

The relation between refractive index deviations and excess volumes for binary mixtures formed by a cyclic ether and a haloalkane has been tested using several methods: refractive index mixing rules and equations of state. Refractive index deviations, excess volumes and molar refractions have been calculated from experimental data of refractive indices and densities at two temperatures 298.15 and 313.15 K. Results obtained have been discussed in terms of intermolecular interactions. Refractive indices were compared with those predicted by several mixing rules. Excess volumes have also been correlated using several cubic equations of state and finally a relation between parameter b from equations of state and molar refraction has been provided.     

Electronic properties of polyoxometalates: a DFT study of alpha/beta-[XM(12)O(40)](n-) relative stability (M=W, Mo and X a main group element)

Keggin heteropolyanions [XM(12)O(40)](n-) have various isomeric structures, alpha and beta being the most common. Conventionally, the alpha structure appears to be the most stable, but calculations carried out at the DFT level for X = P(V), Si(IV), Al(III), As(V), Ge(IV), and Ga(III) and M = W(VI) and Mo(VI) show that this stability depends on several factors, particularly on the nature of the heteroatom (X) and the total charge of the cluster. In this paper, we apply the clathrate model to the Keggin molecule to carry out a fragment-interaction study to elucidate when and why the traditional relative stability of various isomers can be inverted. The fully oxidized anions that have inverted the traditional stability trend in this series are [AlW(12)O(40)](5-) and [GaW(12)O(40)](5-), both of which contain a third-group heteroatom and an overall charge of -5. beta-isomers are always more easily reduced than alpha-isomers. This experimental observation suggests that reduction favors the stability of beta-isomers and one of the most important results of this study is that the alpha/beta inversion is achieved in most cases after the second reduction. The alpha- and beta-isomers may have different properties because the energy of the LUMO, a symmetry-adapted d(xy)-metal orbital, is different.     

A study of thin surface layers by multilayer Mössbauer spectroscopy /MMS/

A stacking Mössbauer technique, MMS has been applied for studying thin surface layers. The surface layers formed on the⁵⁷Fe film in aqueous solutions of corrosion inhibitors, such as zinc phosphate and barium metaborate, and in distilled water was studied by this method. It has been found that the corrosion is much slower in the presence of zinc phosphate and barium metaborate. XPS analysis suggests the formation of a mixed iron zinc phosphate on the surface of the⁵⁷Fe film after corrosion in a zinc phosphate solution.     

Über die Reproduzierbarkeit der turbidimetrischen Bestimmung von Phosphorspuren mit Strychninmolybdostickstoff(V)säure

Microchimica Acta - Mit der turbidimetrischen Strychninnitrat-Methode für Phosphorspurenbestimmung nach der Version von Hegedüs und Dvorszky kann man nur dann ausgezeichnete...     

Radionuclide X-ray fluorescence determination of Cr, Fe, Cu, Zn and Pb in industrial wastewaters after preconcentration of determined elements

Radionuclide X-ray fluorescence analysis was used for the determination of Cr, Fe, Cu, Zn and Pb in industrial wastewaters (from surface treatment of metals and glasses) after precipitation of determined elements by 8-hydroxyquinoline.     

Thermal degradation of copolymers of styrene and methyl-vinyl-silane by pyrolysis gas chromatography

Pyrolysis gas chromatographic investigations have been carried out on copolymers of styrene with trimethyl-vinyl-silane and of styrene with dimethyl-phenyl-vinyl-silane, in order to study the mechansims of thermal degradation and the copolymer structures. We have identified the pyrolysis products and measured their relative amounts. The experiments show that the controlling factor in the mechanism of the degradation is the nature of the side-group attached to the carbon atom at which chain scission occurs. If this side-group is phenyl, the main degradation process is depropagation; if it is if it is trimethyl-silyl or dimethyl-phenyl-silyl, intramolecular hydrogen abstraction followed by β scission becomes more important than depropagation. From the point of view of degradation mechanism, the nature of the side-group attached to the carbon atom from which the hydrogen is abstracted is of minor importance.We estimated the average copolymer block length from the amounts of products containing both comonomers as well as from the amounts of trimer composed of the same monomer.