A Combined Theoretical and Experimental Approach to the Study of the Structural and Electronic Properties of Curcumin as a Function of the Solvent

Curcumin, a chemical compound present in the well-known Indian spice turmeric, has uses in many different fields ranging from medicinal chemistry to the dye industry. Its poor water solubility, though, makes Curcumin difficult to handle, making it less appealing for potential uses. The principal aim of this work is to perform a computational study of the structural and electronic properties of Curcumin {IUPAC name: 1,7-bis(4-hydroxy-3-methoxyphenyl)-1,6-heptadiene-3,5-dione} in several solvents, and a comparison with experimental data. Rotameric equilibria, vibrational and thermochemical analysis, and electronic absorption spectra (with ab initio and semi-empirical methodologies) have been studied, both in vacuum and in three selected solvents. Different computational techniques have been applied and the results compared. Combined approaches resulted in very satisfactory results. Interesting results have emerged, which suggest subsequent investigations about the nature of the excited states and potential derivatives of Curcumin that possibly have non-linear optical applications, as a π-core for innovative materials in laser engineering and photonics.     

Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance

Anode-supported solid oxide fuel cells (SOFCs) based on thin BaZr_0.8Y_0.2O_3 ? δ (BZY) electrolyte films were fabricated by pulsed laser deposition (PLD) on sintered NiO–BZY composite anodes. After in situ reduction of NiO to Ni, the anode substrates became porous, while retaining good adhesion with the electrolyte. A slurry-coated composite cathode made of La_0.6Sr_0.4Co_0.2Fe_0.8O_3 ? δ (LSCF) and BaCe_0.9Yb_0.1O_3 ? δ (BCYb), specifically developed for proton conducting electrolytes, was used to assemble fuel cell prototypes. Depositing by PLD 100 nm thick LSCF porous films onto the BZY thin films was essential to improve the cathode/electrolyte adhesion. A power density output of 110 mW/cm² at 600 °C, the largest reported value for an anode-supported fuel cell based on BZY at this temperature, was achieved. Electrochemical impedance spectroscopy (EIS) measurements were used to investigate the different contributions to the total polarization losses.     

Extension of the Coulomb–Hole–Hartree–Fock theory to molecules

The Coulomb–Hole–Hartree–Fock method introduced by E. Clementi in the early 1960s and reparametrized more recently by S. Chakraworty and E. Clementi to compute the correlated electronic energy in atomic systems, is here extended to compute molecules. The new parametrization is obtained empirically by fitting first and second atomic ionization potentials from He to Ca and a few diatomic molecules. The present formulation makes use of either one or more determinants in order to ensure proper dissociation products, following the early proposal of G.C. Lie and E. Clementi in the context of density functional computations for molecular systems. The new formulation is tested against the dissociation energies of a large number of molecules and it is found satisfactory. © 1995 John Wiley & Sons, Inc.     

Recent advances in propylene polymerization with MgCl2 supported catalysts

The role of Lewis bases in MgCl₂ supported catalysts for olefin polymerization is a subject of continuous interest and discussion in order to obtain more and more active and stereospecific catalysts and to explain their stereoregulating mechanism. Through molecular calculation and conformational analysis it was possible to identify chelating diethers that have the correct oxygen-oxygen distance necessary to tightly coordinate with the Mg ions of the support, even in the presence of other strong Lewis acids, and unable to give secondary reactions with TiCl₄, AlR₃, Ti-C and Ti-H bonds. The use of these donors has allowed the synthesis of catalytic systems that are both highly active and stereospecific even in the absence of external donors. Kinetic data of propylene polymerization with these catalyst systems are reported. The importance of the distance between the donor atoms in bifunctional Lewis bases has been proved also in the case of new classes of internal donors. Molecular modelling studies have enabled us to formulate models of active sites, located on some corners of MgCl₂ crystallites, whose chirality is induced by the presence of a donor molecule in their environment. These models could explain, at least in part, the exceptional increase of isotactic polymer productivity observed for stereospecific catalyst systems, containing only the internal donor, with respect to catalysts lacking the Lewis base and could account for the influence of the donor on the molecular properties of the obtained polymers.     

Palladium-catalyzed carbonylation of enol triflates. A novel method for one-carbon homologation of ketones to α,β-unsaturated carboxylic acid derivatives

Ketones can be homologated to α,gb-unsaturated esters or amides via their enol triflates by a palladium-catalyzed reaction with carbon monoxide and alcohols or amines.     

Stereoselective Double Functionalization of Iron-Carbonyl Complexes of 5,6,7,8-Tetramethylidenebicyclo[2.2.2]oct-2-ene. Crystal Structure and Absolute Configuration of (–)-trans-μ-[(2S,5R,7S)-C,5,6,C-η:C,7,8,C-η-(6,7,8-trimethylidene-5-((Z)-2-oxopropylidene)-2-bicyclo[2.2.2]octyl acetate)]-bis(tricarbonyliron)

The Friedel-Crafts monoacylation of trans-η-[(1RS,2RS,4SR,5SR,6RS,7SR,8SR)-C,5,6,C-η:C,7,8,C-η-(5,6,7,8-tetramethylidene-2-bicyclo[2.2.2]octyl acetate)]-bis(tricarbonyliron) ((±)- 5 ) is highly stereoselective and yields trans-η-[(1RS,2RS,4RS,5SR,6RS,7RS,8SR)-C,6-η,oxo-σ:C,7,8,C-η-(6,7,8-trimethylidene-5-((Z)-2-oxopropylidene)-2-bicyclo[2.2.2]octyl acetate)]-bis(tricarbonyliron) ((±)- 8 ) which equilibrates with the trans-η-[(1RS,2RS,4RS,5SR,6RS,7RS,8SR)-C,5,6,C-η:C,7,8,C-η-(6,7,8-trimethylidene-5-((Z)-2-oxopropylidene)-2-bicyclo[2.2.2]octyl acetate)]-bis(tricarbonyliron) ((±)- 9 ) on heating. Optically pure (–)- 9 has been prepared from the corresponding optically pure alcohol (+)- 4 . The structure and absolute configuration of (–)- 9 was established by single-crystal X-ray diffraction.     

Structural flexibility and role of vicinal 2-thienyl rings in 2,3-dicyano-5,6-di(2-thienyl)-1,4-pyrazine, [(CN)2Th2Pyz], its palladium(II) complex [(CN)2Th2Pyz(PdCl2)2], and the related pentametallic pyrazinoporphyrazines [(PdCl2)4Th8TPyzPzM] (M = Mg(II)(H2O), Zn(II))

The solid state and solution structure of 2,3-dicyano-5,6-di(2-thienyl)-1,4-pyrazine, [(CN)(2)Th(2)Pyz], and its Pd(II) derivative, [(CN)(2)Th(2)Pyz(PdCl(2))(2)]·H(2)O, formed by reaction of [(CN)(2)Th(2)Pyz] with [(C(6)H(5)CN)(2)PdCl(2)] were characterized by X-ray, UV-visible, (1)H and (13)C NMR, and extended X-ray absorption fine structure (EXAFS) spectral measurements. The X-ray crystal structure of [(CN)(2)Th(2)Pyz] shows the presence of one thienyl ring positioned orthogonal to the rest of the molecule, with the two vicinal thienyl rings lying orthogonal to each other in a rare arrangement. NMR studies of [(CN)(2)Th(2)Pyz] in the solid state and in solutions of dimethylformamide or dimethyl sulfoxide confirm a nonequivalence of the thienyl rings in the solid state and also in solution. EXAFS results indicate that two distinct Pd(II) coordination sites are formed at the di(2-thienyl)pyrazino moiety of [(CN)(2)Th(2)Pyz(PdCl(2))(2)]·H(2)O, with identical Pd-N(pyz) (2.03(3) ?) and Pd-Cl (2.36(3) ?) bond lengths but with different Pd-S1 (2.25(4) ?) and Pd-S2 (3.21(5) ?) bond distances in an overall asymmetric molecular framework. Density functional theory (DFT) and time-dependent DFT (TDDFT) theoretical studies also provide information about the structure and spectral behavior of the precursor and its metalated Pd(II) derivative. (1)H/(13)C NMR and UV-visible spectral measurements were also carried out on two heteropentametallic porphyrazine macrocycles which were prepared by a reaction of PdCl(2) with [Th(8)TPyzPzM] where Th(8)TPyzPz = tetrakis-2,3-[5,6-di-(2-thienyl)-pyrazino]porphyrazinato dianion and M = Mg(II)(H(2)O) or Zn(II). Spectroscopic data on the newly synthesized [(PdCl(2))(4)Th(8)TPyzPzM] compounds suggest that the binding of PdCl(2) involves coordination sites of the type S(2(th))PdCl(2) with the two thienyl rings of each di(2-thienyl)pyrazino fragment bound to Pd(II) in an equivalent manner ("th-th" coordination). This is similar to what was found for the corresponding octapyridinated analogues ("py-py" coordination).     

Pyridinium/urea-based anion receptor: methine formation in the presence of basic anions

The influence of the positively charged N-methylpyridinium substituent on the anion binding tendencies of urea-based receptors has been investigated by comparing molecules 1 and 2. These receptors have been studied in acetonitrile, by performing UV-vis. and (1)H NMR titrations with several anions. UV-vis. titrations have also been performed in DMSO, MeOH and CHCl(3)/CH(3)CN mixture (1/1, v/v). In the case of 1, the presence of both H-donor and H-acceptor groups (urea and pyridine, respectively) favours aggregation and the formation of dimers in the solid state. In solution, this tendency to aggregate reduces affinity for anions with respect to the similar urea-based receptor 3. The methylation of the pyridyl group of 1 leads to the pyridinium-containing receptor 2. The pyridinium positive charge enhances the acidity of urea and increases anion affinity, as evidenced by the comparison of the binding constants. Both receptors (1-2) form stable adducts with all investigated anions. However, in the case of 2, the formation of 1?:?1 adducts with basic anions, such as acetate and fluoride, is followed by a proton transfer process. Quite interestingly, deprotonation does not involve the urea group, thus preserving the 1?:?1 adduct, as demonstrated by the (1)H NMR measurements. In particular, the proton transfer process takes place at the methylene group linking the pyridinium fragment to the receptor's skeleton. (1)H NMR studies indicate the formation of a stable neutral methine species, characterised by the loss of aromaticity by the pyridyl ring. These results open new perspectives in the field of anion recognition, as receptor 2 may by applied to the monitoring of both bound anion (through the urea unit) and excess anion in solution (through the development of the yellow methine species).