Spectrum of Mixed Bi-uniform Hypergraphs

A mixed hypergraph is a triple \(H=(V,{\mathcal {C}},{\mathcal {D}})\), where V is a set of vertices, \({\mathcal {C}}\) and \({\mathcal {D}}\) are sets of hyperedges. A vertex-coloring of H is proper if C-edges are not totally multicolored and D-edges are not monochromatic. The feasible set S(H) of H is the set of all integers, s, such that H has a proper coloring with s colors. Bujtás and Tuza (Graphs Combin 24:1–12, 2008) gave a characterization of feasible sets for mixed hypergraphs with all C- and D-edges of the same size \(r, r\ge 3\). In this note, we give a short proof of a complete characterization of all possible feasible sets for mixed hypergraphs with all C-edges of size \(\ell \) and all D-edges of size m, where \(\ell , m \ge 2\). Moreover, we show that for every sequence \((r(s))_{s=\ell }^n, n \ge \ell \), of natural numbers there exists such a hypergraph with exactly r(s) proper colorings using s colors, \(s = \ell ,\ldots ,n\), and no proper coloring with more than n colors. Choosing \(\ell = m=r\) this answers a question of Bujtás and Tuza, and generalizes their result with a shorter proof.     

An interlaboratory comparison on whole water samples

The European Water Framework Directive 2000/60/EC requires monitoring of organic priority pollutants in so-called whole water samples, i.e. in aqueous non-filtered samples that contain natural colloidal and suspended particulate matter. Colloids and suspended particles in the liquid phase constitute a challenge for sample homogeneity and stability. Within the joint research project ENV08 “Traceable measurements for monitoring critical pollutants under the European Water Framework Directive 2000/60/EC”, whole water test materials were developed by spiking defined amounts of aqueous slurries of ultra-finely milled contaminated soil or sediment and aqueous solutions of humic acid into a natural mineral water matrix. This paper presents the results of an European-wide interlaboratory comparison (ILC) using this type of test materials. Target analytes were tributyltin, polybrominated diphenyl ethers and polycyclic aromatic hydrocarbons in the ng/L concentration range. Results of the ILC indicate that the produced materials are sufficiently homogeneous and stable to serve as samples for, e.g. proficiency testing or method validation. To our knowledge, this is the first time that ready-to-use water materials with a defined amount of suspended particulate and colloidal matter have been applied as test samples in an interlaboratory exercise. These samples meet the requirements of the European Water Framework Directive. Previous proficiency testing schemes mainly employed filtered water samples fortified with a spike of the target analyte in a water-miscible organic solvent.     

Structural and thermodiffractometric analysis of coordination polymers. Part II: zinc and cadmium derivatives of the Bim ligand [Bim = bis(1-imidazolyl)methane

New polynuclear coordination species containing the ditopic bis(1-imidazolyl)methane (Bim) ligand have been prepared as microcrystalline powders and structurally characterized by ab initio X-ray powder diffraction methods. [Zn(CH3COO)2(Bim)]n contains 1D chains with tetrahedral metal atoms bridged by Bim ligands; [CdBr2(Bim)]n shows a dense packing with hexacoordinated Cd(II) ions and mu-Br and mu-Bim bridges; at variance, the isomorphous [ZnCl2(Bim)]n and [ZnBr2(Bim)]n species contain cyclic dimers based on tetrahedral Zn(II) ions. Thermodiffractometric analysis allowed estimation of the linear thermal expansion coefficients and strain tensors derived there from. Bim-rich phases, with 2:1 ligand-to-metal ratio, were also isolated: ZnBr2(Bim)2(H2O)3 and [Cd(CH3COO)2(Bim)2]n containing cis and trans MN4O2 chromophores, respectively, show 1D polymers built upon M2Bim2 cycles, hinged on the metal ions. In all species the conformation of the Bim ligands is Cs (or nearly so), while in the few sparse reports of similar coordination polymers the alternative C2 one was preferentially observed.     

Hovenia dulcis Thumberg: Phytochemistry,Pharmacology, Toxicology and Regulatory Framework for Its Use in the European Union

Hovenia dulcis Thunberg is an herbal plant, belonging to the Rhamnaceae family, widespread in west Asia, USA, Australia and New Zealand, but still almost unknown in Western countries. H. dulcis has been described to possess several pharmacological properties, such as antidiabetic, anticancer, antioxidant, anti-inflammatory and hepatoprotective, especially in the hangover treatment, validating its use as an herbal remedy in the Chinese Traditional Medicine. These biological properties are related to a variety of secondary metabolites synthesized by the different plant parts. Root, bark and leaves are rich of dammarane-type triterpene saponins; dihydrokaempferol, quercetin, 3,3′,5′,5,7-pentahydroflavone and dihydromyricetin are flavonoids isolated from the seeds; fruits contain mainly dihydroflavonols, such as dihydromyricetin (or ampelopsin) and hovenodulinol, and flavonols such as myricetin and gallocatechin; alkaloids were found in root, barks (frangulanin) and seeds (perlolyrin), and organic acids (vanillic and ferulic) in hot water extract from seeds. Finally, peduncles have plenty of polysaccharides which justify the use as a food supplement. The aim of this work is to review the whole scientific production, with special focus on the last decade, in order to update phytochemistry, biological activities, nutritional properties, toxicological aspect and regulatory classification of H. dulcis extracts for its use in the European Union.     

Forensic Biochemical Markers to Evaluate the Agonal Period: A Literature Review

Currently, forensic research is multidisciplinary with new methods and parameters useful to define the cause and time of death as well as survival/agony times. The identification of biochemical markers able to estimate agonal period has been studied by many forensic researchers. It is known that the estimation of agonal time in different types of death is not always easy, hence our interest in literature’s data. The studies analyzed in this review confirm the important role of thanatobiochemistry for the estimation of survival times. Regardless of the death cause, the survival/agony time between the primary event and death influences markers concentrations in biological samples (e.g., blood, urine, cerebrospinal fluid). Different biomarkers can be used for qualitative evaluations in deaths with short and long agony (e.g., C-reactive protein, ferritin, GFAP, etc.). Instead, the quantitative interpretation showed limits due to the lack of reference cut-offs. Thanatobiochemistry is a useful tool to confirm what emerged from autopsies findings (macroscopic and histological analysis), but further studies are desirable to confirm the evidence emerging from our review of the literature.     

Asymmetrical flow field-flow fractionation coupled to multiangle laser light scattering detector: optimization of crossflow rate, carrier characteristics, and injected mass in alginate separation

The coupling of the flow field-flow fractionation (FlFFF) to differential refractive index (DRI) and multiangle laser light scattering (LS) detectors is a powerful tool for characterizing charged polysaccharides such as alginate. However, the correct interpretation of the experimental results and extrapolation of meaningful molecular parameters by using an analytical tool with such a level of complexity requires improvement of the knowledge of the alginate behavior in the channel and careful optimization of the operating conditions. Therefore, the influence of the critical operating parameters, such as crossflow rate, carrier composition and concentration, and sample load, on the alginate retention was carefully evaluated. Combined information obtained simultaneously by DRI and LS detectors over the wide range of the crossflow rate, carrier liquid concentration, and injected amount, allowed to set the appropriate combination of optimal parameters. It was found that the crossflow rate of 0.25 mL/min, carrier solution containing 5x10(-2 )mol/L ammonium or sodium chloride, and 50-100 microg of injected sample mass were necessary to achieve complete separation and determination of the meaningful molecular characteristics. The values of the weight-average hydrodynamic radius (R(Hw)), radius of gyration (R(G)), and molar mass (M), obtained under the optimal conditions were in good agreement to those found for alginates in the literature.     

Distance Measurement on an Endogenous Membrane Transporter in E. coli Cells and Native Membranes Using EPR Spectroscopy

Membrane proteins may be influenced by the environment, and they may be unstable in detergents or fail to crystallize. As a result, approaches to characterize structures in a native environment are highly desirable. Here, we report a novel general strategy for precise distance measurements on outer membrane proteins in whole Escherichia coli cells and isolated outer membranes. The cobalamin transporter BtuB was overexpressed and spin‐labeled in whole cells and outer membranes and interspin distances were measured to a spin‐labeled cobalamin using pulse EPR spectroscopy. A comparative analysis of the data reveals a similar interspin distance between whole cells, outer membranes, and synthetic vesicles. This approach provides an elegant way to study conformational changes or protein–protein/ligand interactions at surface‐exposed sites of membrane protein complexes in whole cells and native membranes, and provides a method to validate outer membrane protein structures in their native environment.     

Probing the Design Rationale of a High-Performing Faujasitic Zeotype Engineered to have Hierarchical Porosity and Moderated Acidity

Porosity and acidity are influential properties in the rational design of solid-acid catalysts. Probing the physicochemical characteristics of an acidic zeotype framework at the molecular level can provide valuable insights in understanding intrinsic reaction pathways, for affording structure–activity relationships. Herein, we employ a variety of probe-based techniques (including positron annihilation lifetime spectroscopy (PALS), FTIR and solid-state NMR spectroscopy) to demonstrate how a hierarchical design strategy for a faujasitic (FAU) zeotype (synthesized for the first time, via a soft-templating approach, with high phase-purity) can be used to simultaneously modify the porosity and modulate the acidity for an industrially significant catalytic process (Beckmann rearrangement). Detailed characterization of hierarchically porous (HP) SAPO-37 reveals enhanced mass-transport characteristics and moderated acidity, which leads to superior catalytic performance and increased resistance to deactivation by coking, compared to its microporous counterpart, further vindicating the interplay between porosity and moderated acidity.     

Hybrid organic-inorganic catalytic mesoporous materials with proton sponges as building blocks

Non-ordered organic-inorganic mesoporous hybrid materials with basic sites have been synthesized following a fluoride-catalysed sol-gel process at neutral pH and low temperatures that avoids the use of structural directing agents (SDAs). Proton sponges have been used as the organic builder of the hybrids, while the inorganic part corresponds to silica tetrahedra. The proton sponges are diamines that exhibit very high basicity and, after functionalization, have been introduced as part of the walls of the mesoporous silica by one-pot synthesis. Several hybrids with different organic loadings have been synthesized and characterized by gas adsorption, thermogravimetric and elemental analysis, solid state MAS-NMR and FTIR spectroscopy. These hybrids show high activity as base catalysts and can be recycled.