调谐半导体激光吸收光谱自平衡检测方法研究

可调谐半导体激光吸收光谱技术(TDLAS)是利用半导体激光器的波长调谐特性,扫描待测气体特征吸收线,从而获得待测气体的浓度信息。基于可调谐半导体激光吸收光谱的自平衡检测方法能够有效地消除激光器光强波动等共模噪声和其他同性干扰的影响。实验表明自平衡检测方法可以获得较理想的结果,检测限低于体积比1.2×10-6,与直接吸收光谱法相比降低了一个数量级。自平衡检测电路简单,自带的电子增益补偿机制能够自动进行平衡探测,该方法不用加信号调制和锁相放大器,直接探测待测气体的吸收光谱,从而降低成本,减小系统装置体积,易于集成为便携式痕量气体检测仪。     

双δ掺杂In0.65Ga0.35As/In0.52Al0.48As赝型高迁移率晶体管材料子带电子特性研究

研究了基于InP基的In0.65Ga0.35As/In0.52Al0.48As赝型高迁移率晶体管材料中纵向磁电阻的Shubnikov-deHaas(SdH)振荡效应和霍耳效应,通过对纵向磁电阻SdH振荡的快速傅里叶变换分析,获得了各子带电子的浓度,并因此求得了各子带能级相对于费米能级的位置.联立求解Schrdinger方程和Poisson方程,自洽计算了样品的导带形状、载流子浓度分布以及各子带能级和费米能级位置.理论计算和实验结果很好符合.实验和理论计算均表明,势垒层的掺杂电子几乎全部转移到了量子阱中,转移率在95%以上.     

微型投影机光学引擎的研究

设计了一种针对个人用户使用的微型投影机光学引擎,系统为单片式数字光线处理器结构,采用红绿蓝三色大功率高亮度发光二极管作为光源,使用X棱镜作为合色元件,从而实现38.1～50.8 cm的彩色投影显示.对设计结果进行理论分析后可知,设计结果满足投影显示对颜色的要求,光学引擎的理论效率为16.1%.同时利用Light Tools仿真软件对系统进行建模分析,300万条光线追迹仿真的结果表明,光学引擎的效率为14.6%,与理论分析结果基本符合,屏幕上光通量为22.8 lm,其美国国家标准协会规定的九点照度均匀性达到91.55%和-93.36%,满足设计要求.     

浙江小黄山与河南贾湖遗址出土新石器时代前期陶器化学组成的WDXRF分析研究

利用能量色散X射线荧光光谱法(energy disperse X-ray fluorescence,EDXRF)对浙江嵊州小黄山与河南舞阳贾湖两处新石器时代前期遗址出土陶器的主量元素化学组成进行了分析测定.结果显示,这两处遗址出土陶器的化学组成地域特征明显,与贾湖遗址相比,小黄山遗址陶器具有我国南方陶瓷器普遍存在的“高...     

Assembly,characterization, and photocatalytic activities of TiO<Subscript>2</Subscript> nanotubes/CdS quantum dots nanocomposites

The semiconductor quantum dots (QDs) can be very efficient to tune the response of photocatalyst of TiO₂ to visible light. In this study, CdS QDs formed in situ with about 8 nm have been successfully deposited onto the surfaces of TiO₂ nanotubes (TNTs) to form TNTs/CdS QDs nanocomposites by use of a simple bifunctional organic linker, thiolactic acid. The diffuse reflectance spectroscopy (DRS) spectra of as prepared samples showed that the absorption edge of the TNTs/CdS composite is extended to visible range, with absorption edge at 530 nm. The photocatalytic activity and stability of TNTs/CdS were also evaluated for the photodegradation of rhodamine B. The results showed that when TNTs/CdS QDs was used, photocatalytic degradation of RhB under visible light irradiation reached 91.6%, higher than 45.4 and 30.5% for P25 and TNTs, respectively. This study indicated that the TNTs/CdS QDs nanocomposites were superior catalysts for photodegradation under visible light irradiation compared with TNTs and P25 samples, which may find wide application as a powerful photocatalyst in environmental field.     

X射线CCD标定及模拟

 在北京同步辐射光源4B7B实验站上,采用透射光栅配X射线电荷耦合元件(CCD)的方法对单色光进行了检验,在优化高次谐波抑制方法后,开展了X射线CCD的灵敏度标定实验研究;在标定数据处理过程中,提出了等效曝光时间的概念,修正了快门开合造成的曝光时间误差。标定实验获得了100~1 500 eV能区CCD的灵敏度,补充了300~600 eV能区CCD灵敏度标定数据,验证了简化模型的正确性。     

Electronic transport properties of carbon chains between Au and Ag electrodes: A first-principles study

We report first-principles calculations of the current-voltage characteristic and the conductance of carbon-based molecular wires with different length capped with sulfur ends between two metallic electrodes made of different metals. The optimized molecular structure of carbon chain in the junction is presented on the structure of polyyne. The conductance of the polyyne wires shows oscillatory behavior depending on the number of carbon atoms (triple bonds). Current rectification is found and rectification direction presents inversion with the odd and even number of carbon atoms.     

Electrochemical characterization of LiCoO2 as rechargeable electrode in aqueous LiNO3 electrolyte

The development of lithium ion aqueous batteries is getting renewed interest due to their safety and low cost. We have demonstrated that the layer-structure LiCoO₂ phase, the most commonly used electrode material in organic systems, can be successful delithiated and lithiated again in a water-based electrolyte at currents up to 2.70 A/g. The capacity is about 100 mAh/g at 0.135 A/g and can be tuned by cycling the electrode in different potential ranges. In fact, increasing the high cut-off voltage leads to higher specific capacity (up to 135 mAh/g) but the Coulomb efficiency is reduced (from 99.9% to 98.5%). The very good electrode kinetic is probably due to the high conductivity of the electrolyte solution (0.17 Scm^− 1 at 25 °C) but this behavior is affected by the electrode load.     

Intracavity frequency doubling of an active Q-switched Nd:YAG laser with 2.25 W output power at 473 nm

An active Q-switched diode-end-pumped Nd:YAG laser is reported with 2.9 W output power on the ⁴F_3/2 → ⁴I_9/2 transitions at a pump power of 24 W. With intracavity frequency doubling using a 20-mm-long LBO, a maximum blue output power of 2.25 W is achieved at a repetition rate of 23 kHz. The conversion efficiency from the corresponding Q-switched fundamental output to blue output is 96%. The peak power of the Q-switched blue pulse is up to 610 W with 160 ns pulse width. The fluctuation of the blue output power is less than 4.0% at the maximum output power.     

应力导致InAs/In0.15Ga0.85As量子点结构中 In0.15Ga0.85As阱层的合金分解效应研究

利用固源分子束外延技术,在In0.15Ga0.85As/GaAs量子阱生长了两个InAs/In0.15Ga0.85As量子点(DWELL)样品.通过改变其中一个InAs DWELL样品中的In0.15Ga0.85As阱层的厚度和生长温度,获得了量子点尺寸增大而且尺寸分布更均匀的结果.结合光致发光光谱(PL)和压电调制光谱(PzR)实验结果,发现该样品量子点的光学性质也同时得到了极大的优化.基于有效质量近似的数值计算结果表明:量子点后生长过程中应力导致In0.15Ga0.85As阱层合金分解机理是导致量子点尺寸和光学性质得到优化的主要原因.