Organometallic Polymers. XXVII. Radical-Initiated Polymerization and Copolymerization of π-(2, 4-Hexadien-1-yl Acrylate) tricarbonyliron

The novel monomer, π-(2, 4-hexadiene- l-yl acrylate) tricarbonyliron (HATI), has been prepared by two routes. It was homopolymerized and copolymerized with acrylonitrile, vinyl acetate, styrene, and methyl acrylate in benzene solutions. In all cases azobisisobutyronitrile was the initiator. The relative reactivity ratios, where HATI is defined as M₁, were determined: r₁ = 0.34, r₂ = 0.74, M₂ = acrylonitrile; r₁ = 2.0, r₂ = 0.05, M₂ = 0.74, M₂ = acrylonitrile; r₁ = 2.0, r₂ = 0.05, M₂ = vinyl acetate; r₁ = 0.26, r₂ = 1.81, M₂ = styrene; and r₁ = 0.30, r₂ = 0.74, M₂ = methyl acrylate. The homo-and copolymers had high values of T_g. When polymerizations are carried out at high concentrations, a very high molecular weight tail is observed in HATI hompolymerizations and in HATI-methyl acrylate copolymerizations. The polymers were characterized by IR, gel permeation chromatography, viscosity, and differential scanning calorimetry studies. Finally, thermal decompositions carried out in air resulted in decomposition of the Fe(CO)₃ group, producing Fe₂O₃ as a fine powder. Thermal decomposition under nitrogen (in solution and on solids ground into KBr pellets) resulted in slow destruction of the Fe(CO)₃ groups but the resulting polymer mass was insoluble, and the question of what form the iron exists in (Fe metal, oxides, carbides, etc.) has not been answered.     

Polymerization of Methane and Olefin Mixtures over Fluosulfonic Acid and Antimony Pentafluoride

Mixtures of methane and olefins (ethylene, propylene, butenes, butadiene, and styrene) have been polymerized over HSO₃ F-SbF₃ to yield an oily oligomer with a molecular weight ranging from 100 to 700. The NMR spectra of each polymer showed a sharp peak at or near 1.25 &, suggesting the presence of block methylene in the polymer. The formation of block methylene is surprising considering the fact that the polymerization reaction is carbonium ion in nature. A primary cation has been invoked to explain the results. The formation of this primary cation must involve some extraordinary stabilization by some component in the acid.     

DIFFRACTION STUDIES OF SOME CONVENTIONAL AND NOVEL MICROPHONE BAFFLES

A directional microphone system for field recording of sounds in the air often involves a parabolic reflector to focus the sound waves on the microphone (transducer) element. Some deficiencies of such a system are noted with respect to reproduction of spectra. The reflector system, involving as it does a structure comparable to a wavelength in linear dimension, is not susceptible to traditional high- or low-frequency approximate methods of computation. Modern numerical techniques now permit precise calculation of the directional responses of small reflectors of various shapes. One result is a proposal for a very economical and effective system involving a plane reflector. Other baffle shapes are also investigated, which may be of interest in special applications.     

Transient analysis in a fracturing magnesium plate

Transient displacement and strain distributions in the vicinity of running-crack tips were determined experimentally in centrally notched magnesium plates. The moiré-fringe technique was used together with a Q-spoiled laser which was the light source for single-flash photography. The specimen was designed such that net-section yield occurred prior to fracture and, thus, the crack propagated through the yielded region. Displacement distributions in the vicinity of such running-crack tips were found to vary as\(\sqrt r \) for radial distances as close asr=0.08 in. Transient moiré-fringe patterns were then differentiated graphically to obtain longitudinal strain distributions in the vicinities of running-crack tips. These transient-displacement and transient-strain distributions were compared with equivalent static results. For this ductile material, both the transient and static results showed qualitative agreement with the displacement and strain distributions in an infinitely elastic plate in the region ahead of the crack tip. For the region above the crack tip, the transient and static results differed appreciably.     

Recent Developments in Solid-Propellant Binders

Abstract

The complex and important role of the propellant binder in solid-propellant rockets is described. The severe weight problems of space exploratrion cause high propellant performance to be of major concern in a highly competitive field. Binders contribute to performance, not only in terms of fuel value, but by being compatible with energetic components and by providing good mechanical properties. Both sterilization required for planetary landings and compatibility problems of new energetic oxidizers generate new requirements too stringent for existing binders; only binders composed essentially of saturated aliphatic hydrocarbon are predicted to be suitable. Several saturated-binder developments are in progress. The achievements of one of these programs, based on free-radical synthesis, are evaluated against the goals of the new binder.     

Compact High-Order Finite Differences for Interface Problems in One Dimension

This paper is concerned with the construction and analysis ofcompact finite difference approximations to the model linearsource problem –(pu')' + qu = f where the functions p,q, and f can have jump discontinuities at a finite number ofpoints. Explicit formulae that give O(h²) O(h³) and O(h⁴) accuracyare derived, and a procedure for computing three-point schemesof any prescribed order of accuracy is presented. A rigoroustruncation and discretization error analysis is offered. Numericalresults are also given.     

Crack-opening displacements and normal strains in centrally notched plates

Experimentally determined crack-opening displacements of stationary and running cracks and of inclined stationary cracks in centrally notched plates are reported in this paper. The moiré-fringe technique was used for the determination of displacement fields in test specimens of magnesium, 7075-T6 and 7178-T6 aluminum alloys. Experimentally determined crack-opening displacements were compared with corresponding re ults based on theoretical models of Westergaard, Dugdale, Craggs and Craggs-Dugdale. In addition, normal-strain fields derived from the moiré-fringe data were compared with static or dynamic strain fields of these theoretical models. The results of this investigation indicate that while the Dugdale crack is a fair model of a stationary crack in ductile materials, the Craggs crack appears to be a better representation of a running crack in the ductile materials investigated.     

Controlling nanocrystal superlattice symmetry and shape-anisotropic interactions through variable ligand surface coverage

The assembly of colloidal nanocrystals (NCs) into superstructures with long-range translational and orientational order is sensitive to the molecular interactions between ligands bound to the NC surface. We illustrate how ligand coverage on colloidal PbS NCs can be exploited as a tunable parameter to direct the self-assembly of superlattices with predefined symmetry. We show that PbS NCs with dense ligand coverage assemble into face-centered cubic (fcc) superlattices whereas NCs with sparse ligand coverage assemble into body-centered cubic (bcc) superlattices which also exhibit orientational ordering of NCs in their lattice sites. Surface chemistry characterization combined with density functional theory calculations suggest that the loss of ligands occurs preferentially on {100} than on reconstructed {111} NC facets. The resulting anisotropic ligand distribution amplifies the role of NC shape in the assembly and leads to the formation of superlattices with translational and orientational order.     

Review of Chemometrics Applied to Spectroscopy: 1985-95, Part 3 — Multi-way Analysis

INTRODUCTION

In this third part of a review on chemometrics in spectroscopy we will describe a recent methodology that has attracted increasing interest in spectroscopy. namely multi-way analysis. The application of multi-way analysis in spectroscopy is still relatively new. hence many methodological improvements are being investigated currently. Part of thls review will also be used to describe the algorithmic improvements gained the last decade.