Facile Synthesis and Characterization of 5-[(3-Methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole and Its Potentiometric Sensor Application in a Polyvinyl Chloride Membrane for the Determination of Copper(II)

A novel Schiff base designated as 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole was synthesized and characterized. A polyvinyl chloride-membrane potentiometric copper(II)-selective sensor was prepared by using the synthesized 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole compound. The prepared polyvinyl chloride-membrane copper(II)-selective sensor exhibited very good selectivity and sensitive potentiometric response towards copper(II) ions compared to a wide variety of other cations. The sensor had a fast response time of <5?s, and showed a linear Nerstian behavior to copper(II) ions over a wide concentration range from 1.0?×?10^?5 to 1.0?×?10^?1 mol L^?1 with a slope of 29.2?±?0.7 and correlation coefficient of 0.9998. The prepared polyvinyl chloride-membrane copper(II)-selective sensor was used for 14 weeks without any significant change in its potentiometric response. The potentiometric response of the developed sensor was highly repeatable. Additionally, the developed sensor was used as an indicator electrode for the potentiometric titration of copper(II) ion with ethylenediaminetetraacetic acid. The sensor was also successfully applied to the direct determination of copper(II) ions in tap water, river water, and dam water samples.     

Kinetic of decomposition of some complexes under non-isothermal conditions

Kinetics of thermal decomposition of three structurally similar complexes Co₂Cu(C₂O₄)₃ (R-diam)₂, where R is ethyl, 1,2-propyl or 1,3-propyl, was studied under non-isothermal conditions and nitrogen dynamic atmosphere at heating rates of 5, 7, 10, 12 and 15 K min⁻¹. For data processing the Flynn-Wall-Ozawa and a modified non-parametric kinetic methods were used. By both methods the activation energy are in the range of 97–102 kJ mol⁻¹. The formal kinetic is r=kα(1−α)². Also a compensation effect between lnA and E was evidenced. The kinetic analysis lead to the conclusion of an identic decomposition mechanism by a single step process.     

High-performance liquid chromatographic separation of polyolefin antioxidants and light-stabilisers

Summary A scheme was devised for the identification of 22 common antioxidants and light-stabilisers in polyolefins. The separation of these stabilisers was performed by isocratic reversed phase high-performance liquid chromatography on a RP-18 column. Three different separation conditions have been used: the mobile phase composition was 100% acetonitrile (MeCN), 90/10 meCN/H₂O and 80/20 MeCN/H₂O. The UV₂₅₄/UV₂₈₀ ratio and the elution time of each stabiliser were determined for these three mobile phase compositions. The values of UV₂₅₄/UV₂₈₀ ratios may be used together with the retention time values for the identification of unknown stabilisers in polyolefin samples.     

Rhodium-benzimidazolidin-2-ylidene catalyzed addition of arylboronic acids to aldehydes

Six rhodium–carbene complexes (2a–f) have been prepared and the new compounds characterized by C, H, N analyses, ¹H-n.m.r. and ¹³C-n.m.r. Phenylboronic acid reacts with aldehydes in the presence of a catalytic amount of rhodium(I)–carbene complex, RhCl(COD)(1,3-dialkylbenzimidazolidin-2-ylidene), (2a–f), to give the corresponding aryl secondary alcohols in good yields.     

The burial of solvent-accessible surface area is a predictor of polypeptide folding and misfolding as a function of chain elongation

The hydrophobic effect is a major driving force in all chemical and biological events involving chain collapse in aqueous solution. Here, we show that the burial of nonpolar solvent-accessible surface area (NSASA) is a powerful criterion to predict the folding and misfolding behavior of small single-domain proteins as a function of chain elongation. This bears fundamental implications for co- and post-translational protein folding in the cell and for understanding the interplay between noncovalent interactions and formation of native-like structure and topology. Comparison between the fraction of NSASA in fully unfolded and folded elongating chains shows that efficient burial of nonpolar surface area is preferentially achieved only when the polypeptide chain is almost complete. This effect has no preferential vectorial character in that it is present upon elongation from both the N and C termini. For incomplete chains that do not have the ability to fold and bury nonpolar surface intramolecularly, the overall hydrophobic nature of the polypeptide chain (expressed as FBA, i.e., fractional buried surface area per residue) dictates the tendency toward misfolding and self-association. N-terminal chains characterized by FBA exceeding 0.73 are likely to misfold and aggregate, if unable to fold intramolecularly.     

Synthesis of chiral crown ethers and complexation with chiral protonated amine compounds: X-ray crystal and nuclear magnetic resonance studies of perchlorate salt of chiral benzo-monoaza-15-crown-5 and chiral monoaza-15-crown-5

The X-ray crystal structure of IX, perchlorate salt of R-(?-2-ethyl-N-benzyl-4,7,19,13-tetraoxa-8,9-benzo-1-azacyclopentadec-8-ene has been determined. In the molecule, the protonated nitrogen atom participates in two N-H?O hydrogen bonds. The unusually high proton affinity of aza crown ether leads to the formation of diastreomer instead of complex formation with chiral R-(+)-1-phenyl ethyl ammonium perchlorate and S-(?)-1-phenyl ethyl ammonium perchlorate. The complex ability of host ethers was evaluated in terms of structural modification.     

Thermal degradation of some cross-linked copolymers of vinyl acetate

Pyrolysis in combination with gas chromatography and thermogravimetry were used to study the thermal degradation of some cross-linked copolymers of vinyl acetate with divinylbenzene and ethylstyrene. The temperature was varied in the range 200° and 800°. The thermal decomposition products of the analyzed copolymers vary greatly, both with the temperature and with the composition of the samples. The experimental data obtained led to the assumption of a complex degradation mechanism, evidenced by the overlapping processes and the unexpected contents of certain evolved compounds as a function of composition.

---

Zusammenfassung Pyrolyse in Kombination mit Gaschromatographie und Thermogravimetrie wurde zu Untersuchung des thermischen Abbaus einiger vernetzter Kopolymere von Vinylacetat mit Divinylbenzol und Äthylstyrol herangezogen. Die Temperatur wurde im Bereich von 200–800° variiert. Die thermischen Zersetzungsprodukte sind sehr unterschiedlich, abhängig von der Temperatur und der Zusammensetzung der Probe. Aus den experimentellen Daten wird auf einen komplexen Zersetzungsmechanismus geschlossen, der durch die Überlappung der Prozesse und durch das auftreten bestimmter unerwarteter Verbindungen in Abhängigkeit von der Zusammensetzung bestätigt wird.

---

. 200–800°. , . , .

     

Spectrophotometric studies of anionic dye-cationic surfactant interactions in mixture of cationic and nonionic surfactants

The interaction between an anionic dye C.I. Reactive Orange 16 (RO16) and a cationic surfactant dodecylpyridinium chloride (DPC) in mixtures of DPC and nonionic surfactants poly(oxyethylene)ethers (C(m)POE(n); m = 12, 16 and 18, n = 4, 10 and 23) are investigated spectrophotometrically in a certain micellar concentration range. The spectrophotometric measurements of dye-surfactant systems are carried out as function of mole fraction of surfactant at four different temperatures. For this reason, a typical system was occurred at 1.0 x 10(-2) mol l(-1) for surfactants and at 1.0 x 10(-4) mol l(-1) for dye concentrations. The formation of DPC-RO16 complex in the C(m)POE(n) solutions of different mole fractions in its micellar concentration range have been determined and compared to those obtained in the binary mixtures. From the spectrophotometric measurements has been observed that the addition of nonionic surfactant in to the mixture of DPC-RO16, causes a significant increase of the value of absorbance. This increase explains that the stability of DPC-RO16 complex is reduced in the presence of nonionic surfactant micelles. It can be seen from results; in mixed surfactant solutions, there are DPC-C(m)POE(n) and RO16-C(m)POE(n) interactions in addition to DPC-RO16 interaction. Since the solubilizaton of the DPC-RO16 complex has been appeared in the C(m)POE(n) solution, our results support the conclusion that adding C(m)POE(n) influences the hydrophobic-hydrophilic balance of the studied complex. Furthermore effect of the alkyl chain length and the number of poly(oxyethylene) in nonionic surfactant on values of absorbance have been investigated.     

The solvent extraction of alkali metal picrates with 4,13-N,N'-dibenzyl-4,13-diaza-18-crown-6

Extraction of alkali metal picrates with N,N'-dibenzyl-18-crown-6 was carried out, with dichloromethane as water-immiscible solvent, as a function [ligand]/[metal cation]. The extractability of metal picrates (Li(+), Na(+), K(+), Rb(+), Cs(+)) was evaluated as a function of [L]/[M(+)]. The extractability of complex cation-picrate ion pairs decreases in this sequence: Li(+)>Rb(+)>Cs(+)>K(+)>Na(+). The overall extraction equilibrium constants (K(ex)) for complexes of N,N'-dibenzyl-18-crown-6 with alkali metal picrates between dichloromethane and water have been determined at 25 degrees C. The values of the extraction constants (logK(ex)) were determined to be 10.05, 6.83, 7.12, 7.83, 6.73 for Li(+), Na(+), K(+), Rb(+) and Cs(+) compounds, respectively. DB186 shows almost 2-fold extractability against Li(+) compared to the other metal picrates, whereas it shows no obvious extractability difference amongst the other metal cations when [L]/[M(+)] is 0.2-1. However, an increasing extractability is observed for Cs(+) when [L]/[M(+)] [1].     

Lattice-Boltzmann simulation of coalescence-driven island coarsening

A two-dimensional lattice-Boltzmann model (LBM) with fluid-fluid interactions was used to simulate first-order phase separation in a thin fluid film. The intermediate asymptotic time dependence of the mean island size, island number concentration, and polydispersity were determined and compared with the predictions of the distribution-kinetics model. The comparison revealed that the combined effects of growth, coalescence, and Ostwald ripening control the phase transition process in the LBM simulations. However, the overall process is dominated by coalescence, which is independent of island mass. As the phase transition advances, the mean island size increases, the number of islands decrease, and the polydispersity approaches unity, which conforms to the predictions of the distribution-kinetics model. The effects of the domain size on the intermediate asymptotic island size distribution, scaling form of the island size distribution, and the crossover to the long-term asymptotic behavior were elucidated.