Heterodyne measurements of 12C18O, 13C16O,and 13C18 O laser frequencies; mass dependence of Dunham coefficients

Difference frequencies between rare isotope CO lasers and a ¹²C¹⁶O laser have been measured by optical heterodyne techniques. These data for ¹²C¹⁸O, ¹³C¹⁶O, and ¹³C¹⁸O have been used together with the 15 previously reported Dunham coefficients Y_kl for ¹²C¹⁶O to determine a set of mass independent parameters Δ_kl and U_kl defined by Y_kl = μ^-(k/2+l)[1+m_e(Δ^C_kl/M_C + Δ^O_kl/M_O)] U_kl. The 01, 1 0, and 20 correction terms were found to be statistically significant. Line frequencies calculated from the resulting 15 Dunham coefficients for the rare isotopes are accurate to a few MHz in the measured laser bands.     

Detection at Gbit/s rates with a TJS GaAlAs laser

Feasibility has been shown for using a GaAl-GaAlAs Transverse Junction Stripe (TJS) laser as a high performance optical detector. The impulse response of the device was measured to be 170 ps (FWHM), corresponding to a receiver capability of 5 Gbit/s (NRZ). The responsivity at the operating wavelength of the laser/detector (900 nm) and at a reverse bias voltage of 3 V was 0.1 A/W. As a comparison, measurements on a narrow-stripe DH laser showed an impulse response of 6 ns (FWHM) and a responsivity of 0.06 A/W. Using identical structures for both the laser and the detector offer a promising approach to monolithic integration.     

Integer quantum Hall effect on a six-valley hydrogen-passivated silicon (111) surface

We report magnetotransport studies of a two-dimensional electron system formed in an inversion layer at the interface between a hydrogen-passivated Si(111) surface and vacuum. Measurements in the integer quantum Hall regime demonstrate that the expected sixfold valley degeneracy for these surfaces is broken, resulting in an unequal occupation of the six valleys and anisotropy in the resistance. We hypothesize the misorientation of Si surface breaks the valley states into three unequally spaced pairs, but the observation of odd filling factors is difficult to reconcile with noninteracting electron theory.     

Characterization of self-assembled monolayers of oligo(phenyleneethynylene) derivatives of varying shapes on gold: effect of laterally extended pi-systems

Fully conjugated organic molecules, such as the oligo(phenyleneethynylene) (OPE) systems, are of growing interest within the field of molecular electronics, as is the self-assembly of well-defined molecular thin films with predefined functions. The structure and function of such films are intimately related and governed by the structures of their molecular constituents, through the intermolecular interactions and the interactions between the molecules and the substrate, onto which the film is assembled. Here we report on the synthesis of a series of three OPE derivatives, with the general structure phenylethynylene-aryl-ethynylenephenylene-headgroup, and the structural investigation of the self-assembled monolayers (SAMs) formed from them on Au(111) surfaces. The SAMs were characterized by infrared reflection-absorption spectroscopy, spectroscopic ellipsometry, high-resolution X-ray photoemission spectroscopy, and near-edge X-ray absorption fine structure spectroscopy. The effective thickness of the SAMs was observed to decrease as the pi-system of the aryl moiety of the OPE adsorbate was extended perpendicular to its molecular long axis. Changing the aryl moiety from benzene to naphthalene to anthracene resulted in lower molecular surface densities and larger molecular inclination. The average tilt angles for the benzene, naphthalene, and anthracene SAMs were found to be about 30 degrees , 40 degrees , and 42 degrees from the surface normal, respectively. For the largest adsorbate, the anthracene derivative, there is spectroscopic evidence suggesting the existence of nonequivalent binding sites. The differences observed between the SAMs are rationalized in terms of the shape of the adsorbates and the strength of the pi-pi interactions between them.     

Compressional, temporal, and compositional behavior of H2-O2 compound formed by high pressure x-ray irradiation

X-ray irradiation was found to convert H(2)O at pressures above 2 GPa into a novel molecular H(2)-O(2) compound. We used optical Raman spectroscopy to explore the behavior of x-ray irradiated H(2)O samples as a function of pressure, time, and composition. The compound was found to be stable over a period of two years, as long as high pressure conditions (>2 GPa) were maintained. The Raman shifts for the H(2) and O(2) vibrons behaved differently from pure H(2) and O(2) as pressure was increased on the compound up to 70 GPa, indicating that it remains a distinct, molecular compound. Based on spectra taken from different locations in a single sample, it appears that multiple forms of the H(2)-O(2) compound exist. The structure and composition of the starting material plays an important role in compound formation, as we found that hydrogen-filled ice clathrate C(2) (H(2))H(2)O did not undergo the same dissociation as observed in ice VII upon x-ray irradiation until pressure was increased to above 10 GPa.     

Separation of cytokinin isomers with a partial filling-micellar electrokinetic chromatography-mass spectrometry approach

A new method based on partial filling-MEKC (PF-MEKC) directly coupled to ESI-MS was developed for the simultaneous separation and determination of 13 structurally similar cytokinins, including various geometric and positional isomers of cytokinins. On the basis of the resolution of the neighboring isomer peaks, different parameters (i.e., pH and concentration of buffer, surfactant concentrations, length of the injected micellar plug, organic modifier, and applied separation voltage) were optimized to achieve a satisfactory PF-MEKC separation. Under optimum conditions, the separation of 13 cytokinin standards was accomplished within 25 min. MS/MS with multiple reaction monitoring detection was carried out to obtain sufficient selectivity. PF-MEKC-MS/MS allowed for the direct identification and confirmation of the cytokinins present in banana (Musa spp.) pulp sample after extraction and purification. Finally, trans-zeatin riboside (ZR) and trans-zeatin (Z) were unambiguously identified in banana pulp. It is anticipated that the current PF-MEKC-MS method can be applied to analyze cytokinins in a wide range of biological samples.     

Dibenzyltin(IV) complexes of the 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-olates: Synthesis and an investigation of structures by X-ray diffraction, solution and solid-state tin NMR, Sn Mössbauer and electrospray ionization MS

A series of cis-bis{5-[(E)-2-(aryl)-1-diazenyl]quinolinolato}dibenzyltin(IV) complexes have been synthesized by reacting sodium salts of 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol (LH) and dibenzyltin dichloride. These complexes have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS in solution and by IR and ^119mSn Mössbauer, ¹¹⁷Sn CP-MAS NMR spectroscopy in solid state. In addition, the structures of three of the dibenzyltin(IV) complexes, viz., Bz₂Sn(L²)₂ (2), Bz₂Sn(L³)₂ (3), and Bz₂Sn(L⁵)₂ (5) (L = 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol: aryl = 4′-methylphenyl- (L²H), 4′-methoxylphenyl- (L³H) and 4′-bromophenyl- (L⁵H)) were determined by single-crystal X-ray diffraction. In general, the complexes were found to adopt a distorted cis-octahedral arrangement around the tin atom in both solution and solid state.     

One-dimensional diffusion of colloids in polymer solutions

For colloid-polymer systems confined in one-dimensional channels, the diffusion of the colloidal particles is obtained by tracking individual particles using enhanced video microscopy and digital image analysis. For short times, the diffusion is normal, of the Fickian type, with mean-squared displacement varying linearly with time. For long times, however, the mean-squared displacement is found to increase more slowly with time, being proportional to the square root of time, in agreement with the theoretical prediction for diffusion of hard rods in one dimension in which mutual crossing of the particles cannot take place. The crossover from short-time to long-time diffusion is observed and is found to depend on the colloid and polymer concentrations. Unexpectedly, for small polymer-to-colloid size ratios, it is the polymer rather than the colloid concentration which has a leading effect on the colloid diffusion.     

Validation of green‐solvent extraction combined with chromatographic chemical fingerprint to evaluate quality of Stevia rebaudiana Bertoni

An approach that combined green‐solvent methods of extraction with chromatographic chemical fingerprint and pattern recognition tools such as principal component analysis (PCA) was used to evaluate the quality of medicinal plants. Pressurized hot water extraction (PHWE) and microwave‐assisted extraction (MAE) were used and their extraction efficiencies to extract two bioactive compounds, namely stevioside (SV) and rebaudioside A (RA), from Stevia rebaudiana Bertoni (SB) under different cultivation conditions were compared. The proposed methods showed that SV and RA could be extracted from SB using pure water under optimized conditions. The extraction efficiency of the methods was observed to be higher or comparable to heating under reflux with water. The method precision (RSD, n = 6) was found to vary from 1.91 to 2.86% for the two different methods on different days. Compared to PHWE, MAE has higher extraction efficiency with shorter extraction time. MAE was also found to extract more chemical constituents and provide distinctive chemical fingerprints for quality control purposes. Thus, a combination of MAE with chromatographic chemical fingerprints and PCA provided a simple and rapid approach for the comparison and classification of medicinal plants from different growth conditions. Hence, the current work highlighted the importance of extraction method in chemical fingerprinting for the classification of medicinal plants from different cultivation conditions with the aid of pattern recognition tools used.