Speciation of Arsenic Compounds in the Urine of Rats Orally Exposed to Dimethylarsinic Acid Ion Chromatography with ICP–MS as an Element-Selective Detector

A combined ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP—MS) system as an element-selective detector has been used for the determination of arsenic compounds. Seven arsenic compounds were separated by cation-exchange chromatography. Subsequently, the separated arsenic compounds were directly introduced into the ICP—MS and were detected at m/z =75. Detection limits for the seven arsenic compounds ranged from 0.8 to 3.8 μg As/l. The IC–ICP–MS system was applied to the determination of arsenic compounds in the urine of dimethylarsinic acid (DMAA)-exposed rats. DMAA was the most abundant arsenic compound detected. Arsenous acid, monomethylarsonic acid and trimethylarsine oxide were also detected.     

化学衍生辅助液相色谱-串联质谱测定枇杷膏中的齐墩果酸和熊果酸

建立了一种液相色谱-串联质谱(LC-MS/MS)同时测定齐墩果酸和熊果酸含量的分析方法,利用衍生化试剂N,N-二甲基乙二胺(DMED)和d4-N,N-二甲基乙二胺(d4-DMED)分别衍生样品和标准工作溶液中的目标分析物,并将标准工作液的衍生产物作为稳定同位素内标。该方法线性关系良好,相关系数均0.99;齐墩果酸和熊果酸的检出限(S/N=3)分别为0.92 ng/L和1.06 ng/L,加标回收率分别为98.7%~102.7%和97.2%~105.0%。该方法简单、快速、准确,可满足枇杷膏中齐墩果酸和熊果酸高灵敏度检测的需求。     

New fabrication approach to develop a high birefringence photo-crosslinked film based on a sulfur-containing liquid crystalline molecule with large temperature dependence of birefringence

ABSTRACT

We present a new fabrication approach to achieve a high birefringence film by means of photopolymerization based on an alkylthio-containing rod-like liquid crystalline molecule exhibiting large temperature dependence of birefringence. We designed a new reactive mesogen having alkylthio linkages (BPM–S). It was found that BPM–S had a larger increment of birefringence with decreasing temperature, relative to commercially available alkoxy analog LC242. This result could be thought to be due to enhanced intermolecular attractive interaction for an alkylthio mesogen implied by the proximity of laterally neighboring molecules and cybotactic nematic tendency based on wide-angle X-ray measurement. The uniaxially-aligned photo-polymerized film for BPM–S showed higher birefringence than that for LC 242.     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic carbonate structure

A styrene‐based monomer having a five‐membered cyclic carbonate structure, 4‐vinylbenzyl 2,5‐dioxoran‐3‐ylmethyl ether (VBCE), was prepared by lithium bromide‐catalyzed addition of carbon dioxide to 4‐vinylbenxyl glycidyl ether (VBGE). Radical polymerization of the obtained VBCE was carried out using 2,2′‐azobisisobutyronitrile as an initiator. PolyVBCE with number‐averaged molecular weight higher than 13,800 was obtained by a solution polymerization in N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, and methyl ethyl ketone. The glass transition temperature and 5 wt % decomposition temperature of the polyVBCE were determined to be 52 and 305 °C by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBCE repeating unit can be also obtained via chemical modification of polyVBGE, that is, a lithium‐bromide‐catalyzed addition of carbon dioxide to a polyVBGE prepared from a radical polymerization of VBGE. Further copolymerization of VBCE with styrene gave the corresponding copolymer in a high yield. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Supramolecular polymer gels from polystyrene bearing cyclic amidine Group and acrylic acid/n‐butyl acrylate copolymers

We have prepared supramolecular polymer gels by mixing solutions of a polystyrene bearing cyclic amidine pendant groups (Poly‐A) and copolymers of acrylic acid and n‐butyl acrylate (Poly‐C), followed by evaporation. FT‐IR analysis indicated that the gels were formed through three‐dimensional network of the amidinium‐carboxylate salt bridge. DSC study showed that the Poly‐A and the Poly‐C were miscible when the salt bridge content was high. On the other hand, the mixtures with small salt bridge content showed phase separation. Dynamic shear measurements showed that the gel prepared from Poly‐A and Poly‐C with acrylic acid unit content of 15% had G' higher than G″ over a temperature range of ?22 °C to 32 °C, in which the G' value reached almost 1 MPa. The gel had a crossover point of G' and G″ at 32 °C, very close to room temperature, which suggested facile processability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 765–770     

Metallic conductivity and ferromagnetic interaction of iron(III) d spins in the needle crystals of (ethylenedithiotetrathiafulvalenoquinone-1,3-dithiolemethide)(2).FeBr(4) salt

The 2:1 charge-transfer (CT) salts (1(2).FeBr(4) and 1(2).GaBr(4)) of ethylenedithiotetrathiafulvalenoquinone-1,3-dithiolemethide (1) with FeBr(4)(-) and GaBr(4)(-) counteranions were obtained as needle crystals, whose structures are almost the same as each other. The 1 molecules form a one dimensionally stacked column with alternation of their molecular axis direction, while the counteranions are aligned in parallel with the 1-stacked columns with the direction of their distorted-tetrahedral geometry maintained. The room-temperature electrical conductivities measured on the single crystals of 1(2).FeBr(4) and 1(2).GaBr(4) were 4.6 and 2.1 S cm(-1), respectively. From the temperature dependences of their electrical conductivities in both cases the electrical conducting properties were metallic between ca. 170 and 300 K, but below ca. 170 K converted to be semiconducting and continued till 5 K, although the activation energies are very small (4-10 meV). For 1(2).FeBr(4) very weak and antiferromagnetic interaction occurred between the d spins of FeBr(4)(-) ions in the temperature range of ca. 1-300 K. However, below ca. 15 K the ferromagnetic interaction was reversely preferential possibly by participation of the pi spin of 1.     

Illumination accelerates the decay of the O-intermediate of pharaonis phoborhodopsin (sensory rhodopsin II)

pharaonis phoborhodopsin (ppR, also called pharaonis sensory rhodopsin II [psRII]) is a member of the archaeal rhodopsin family and acts as a repellent phototaxis receptor of Natronobacterium pharaonis. Upon illumination, ppR is excited and undergoes a linear cyclic photoreaction, namely, a photocycle that constitutes photointermediates such as M- and O-intermediates (ppRM and ppRO, respectively). Under a constant background illumination (>600 nm) that irradiates ppRO, the decay rate of the flash-induced ppRO increased with an increase in the background light intensity, indicating the photoreactivity of ppRO. Azide did not influence the light-accelerated ppRO decay, but the time required for the cycle to be completed became shortened in an azide concentration-dependent manner because of acceleration of ppRM decay. Hence, the turnover rate of photocycling increased appreciably in the presence of both the background illumination and the azide. The observation reported previously (Schmies, G. et al. 2000, Biophys. J. 78:967-976) is discussed in connection with the present observations.     

Enhanced optical sensing of anions with amide-functionalized gold nanoparticles

A gold nanoparticle surface-modified with amide ligands shows enhanced optical sensing of anions: the detection limit is increased by about three orders of magnitude higher than that originally expected from the anion binding ability of neutral amide ligands.     

Controlled monomer insertion into polymer main chain: synthesis of sequence ordered polystyrene containing thiourethane and trithiocarbonate units by the RAFT process

A polymer having a trithiocarbonate moiety in the main chain was applied as a polymeric precursor to the synthesis of a sequence ordered polymer by insertion polymerization of styrene into the main chain by a RAFT mechanism.