Caloric properties of dilute nonelectrolyte solutions: A success story

Selected aspects of the thermodynamics of very dilute solutions of gases in liquids, in particular aqueous solutions, are reviewed and connected with recent high-precision experimental techniques [vapor-liquid equilibrium measurements (VLE), calorimetry and densimetry]. Some of the problems encountered in data reduction and data correlation over large temperature ranges, including the critical region, are discussed. The focus is on caloric properties, such as partial molar enthalpy changes on solution, ΔH^∞₂, and partial molar heat capacity changes on solution, ΔC^∞_P,2: direct calorimetric methods are compared with indirect methods based on VLE studies as a function of temperature (van't Hoff approach).     

Zur Thermodynamik der Mischungen von n-Alkoholen mit Kohlenwasserstoffen

A method is presented which allows to describe the concentration dependence of the excessGibbs free energyG ^E as well as its variation with temperature in mixtures of n-alcohols with various hydrocarbons. The number of data required is reduced to one experimental point of the excessGibbs free energy for each system. The theoretical treatment is based on the work ofFlory ^{1, 2} and ofRenon andPrausnitz ³. The excess volume due to mixing and association is neglected, but differences in the size of the various species are taken into account. This procedure yields a thermodynamic correlation between the excessGibbs free energy and the enthalpy of mixingH ^E of alcohol-hydrocarbon solutions and results in a comprehensive formalism including nonassociated mixtures.     

Determination of excess volumes in 1,2-dichloroethane + benzene, + toluene, + p-xylene, + cyclohexane,and + methylcyclohexane with a vibrating-tube densimeter

Densities of mixtures of 1,2-dichloroethane + benzene, + toluene, + p-xylene, + cyclohexane, and + methylcyclohexane were measured at 298.15 K over the whole concentration range by means of a vibrating-tube densimeter. Molar excess volumes were calculated from the results and compared to values obtained by interpolation or extrapolation of literature data.     

Magnetization processes of CuMn below the freezing temperature Tf

A simple classical model [5] that is based on a blocking of magnetic clusters in a uniaxial anisotropy field explains characteristic properties of magnetization processes of Cu(5–15 at.%) Mn as transition states between the “zero point magnetization” M₀ = M(T → OK) and the thermal equilibrium magnetization M_∞ = M(t → ∞, T). Further it shows two facts the experimental confirmations of which we report in this paper: (a) a magnetization decrease with increasing temperature in high fields and (b) a superposition rule for the magnetization processes in small fields and at low temperatures.     

Intelligent driving in traffic systems with partial lane discipline

It is a most common notion in traffic theory that driving in lanes and keeping lane changes to a minimum leads to smooth and laminar traffic flow, and hence to increased traffic capacity. On the other hand, there exist persistent vehicular traffic systems that are characterised by habitual disregarding of lane markings, and partial or complete loss of laminar traffic flow. Here, we explore the stability of such systems through a microscopic traffic flow model, where the degree of lane-discipline is taken as a variable, represented by the fraction of drivers that disregard lane markings completely. The results show that lane-free traffic may win over completely ordered traffic at high densities, and that partially ordered traffic leads to the poorest overall flow, while not considering the crash probability. Partial order in a lane-free system is similar to partial disorder in a lane-disciplined system in that both lead to decreased traffic capacity. This could explain the reason why standard enforcement methods, which rely on continuous increase of order, often fail to incur order to lane-free traffic systems. The results also provide an insight into the cooperative phenomena in open systems with self-driven particles.     

Synthesis and characterization of nanostructured iron compounds prepared from the decomposition of iron pentacarbonyl dispersed into carbon materials with varying porosities

This work describes the production and characterization of carbon-iron nanocomposites obtained from the decomposition of iron pentacarbonyl (Fe(CO)₅) mixed with different carbon materials: a high surface area activated carbon (AC), powdered graphite (G), milled graphite (MG), and carbon black (CB). The nanocomposites were prepared either under argon or in ambient atmosphere, with a fixed ratio of Fe(CO)₅ (4.0 mL) to carbon precursor (2.0 g). The images of scanning electron microscopy and the analysis of textural properties indicated the presence of nanostructured Fe compounds homogeneously dispersed into the different classes of pores of the carbon matrices. The elemental Fe content was always larger for samples prepared in ambient atmosphere, reaching values in the range of 20–32 wt%. On the other hand, samples prepared under argon showed reduced Fe content, with values in the range 5–10 wt% for samples prepared from precursors with low surface area (G, MG, and CB) and a much higher value (~19 wt%) for samples prepared from the precursor of high surface area (AC). Mössbauer spectroscopy and X-ray diffractometry showed that the nanoparticles were mostly composed of iron oxides in the case of the samples prepared in oxygen-rich ambient atmosphere and also for the AC-derived nanocomposite prepared under argon, which is consistent with the large oxygen content of this precursor. For the other precursors, with reduced or no oxygen content, metallic iron and iron carbides were found to be the dominant phases in samples prepared under oxygen-free atmosphere. The samples prepared in ambient atmosphere and the AC-derived sample prepared under argon exhibited superparamagnetic behavior at room temperature, as revealed by temperature-dependent magnetization curves and Mössbauer spectroscopy.     

Hydrophobic interaction chromatography of proteins IV. Kinetics of protein spreading

Adsorption of proteins on surfaces of hydrophobic interaction chromatography media is at least a two-stage process. Application of pure protein pulses (bovine serum albumin and beta-lactoglobulin) to hydrophobic interaction chromatography media yielded two chromatographic peaks at low salt concentrations. At these salt concentrations, the adsorption process is affected by a second reaction, which can be interpreted as protein spreading or partial unfolding of the protein. The kinetic constants of the spreading reaction were derived from pulse response experiments at different residence times and varying concentrations by applying a modified adsorption model considering conformational changes. The obtained parameters were used to calculate uptake and breakthrough curves for spreading proteins. Although these parameters were determined at low saturation of the column, predictions of overloaded situations could match the experimental runs satisfactorily. Our findings suggest that proteins which are sensitive to conformational changes should be loaded at high salt concentrations in order to accelerate the adsorption reaction and to obtain steeper breakthrough curves.     

Towards perfunctionalized dodecahedranes--en route to C20 fullerene

“One‐pot” substitution of the twenty hydrogen atoms in pentagonal dodecahedrane (C₂₀H₂₀) by OH, F, Cl, and Br atoms is explored. Electrophilic insertion of oxygen atoms with DMDO and TFMDO as oxidizing reagents ended, far off the desired C₂₀(OH)₂₀, in complex polyol mixtures (up to C₂₀H₁₀(OH)₁₀ decols, a trace of C₂₀H(OH)₁₉?). Perfluorination was successful in a NaF matrix but (nearly pure) C₂₀F₂₀ could be secured only in very low yield. “Brute‐force” photochlorination (heat, light, pressure, time) provided a mixture of hydrogen‐free, barely soluble C₂₀Cl₁₆ dienes in high yield and C₂₀Cl₂₀ as a trace component. Upon electron‐impact ionization of the C₂₀Cl₁₆ material sequential loss of the chlorine atoms was the major fragmentation pathway furnishing, however, only minor amounts of chlorine‐free C₂₀⁺ ions. “Brute‐force” photobrominations delivered an extremely complex mixture of polybromides with C₂₀HBr₁₃ trienes as the highest masses. The MS spectra exhibited exclusive loss of the Br substituents ending in rather intense singly, doubly, and triply charged C₂₀H_4–0^+(2+)(3+) ions. The insoluble ～C₂₀HBr₁₃ fraction (C₂₀Br₁₄ trienes as highest masses) obtained along a modified bromination protocol, ultimately allowed the neat mass selection of C₂₀^? ions. The C₂₀Cl₁₆ dienes and C₂₀H_0–3Br_14–12 tri‐/tetraenes, in spite of their very high olefinic pyramidalization, proved resistant to oxygen and dimerization (polymerization) but added CH₂N₂ smoothly. Dehalogenation of the respective cycloaddition products through electron‐impact ionization resulted in C_22–24H_4–8⁺⁽²⁺⁾ ions possibly constituting bis‐/tris‐/tetrakis‐methano‐C₂₀ fullerenes or partly hydrogenated C₂₂, C₂₃, and C₂₄ cages.