The heteropolytungstate core {BW13O46}11- derived as monomer, dimer, and trimer

A study of the borotungstate system has led to the characterization of new, original compounds based on the unconventional Keggin derivative [H(3)BW(13)O(46)](8-) ion (denoted as 1). [H(3)BW(14)O(48)](6-) (2) and the dimer [H(6)B(2)W(26)O(90)](12-) (3) crystallize as mixed cesium/ammonium salts and have been characterized by single-crystal X-ray diffraction analysis. Anion 2 reveals an unusual arrangement, consisting of an outer {W(3)O(9)} core grafted onto the monovacant [BW(11)O(39)](9-) Keggin moiety and exhibits an unprecedented distorted square-pyramidal arrangement for a cis-{WO(2)} core. Elemental analysis, supported by bond distance analysis, is consistent with the presence of three protons distributed over the terminal oxygens of the outer {W(3)O(7)} capping fragment. The [H(6)B(2)W(26)O(90)](12-) ion (3) is formally derived from the direct condensation of two [H(3)BW(13)O(46)](8-) subunits. The cisoid arrangement of the two [BW(11)O(39)](9-) subunits, coupled with the antiparallel arrangement of the two quasi-linear O=W...O=W-OH2 chains within the central {W(4)O(12)} connecting group, breaks any symmetry, thereby resulting in a chiral compound. Polarography and pH-metric titrations reveal the formation of the monomeric precursor [H(3)BW(13)O(46)](8-) (anion 1) under stoichiometric conditions. (183)W NMR analysis of 2 and 3 in solution gives complex spectra, consistent with the presence of equilibria between several species. In the frame of this study, we also report on a structural re-investigation of the [H(6)B(3)W(39)O(132)](15-) ion (4) based on reliable results obtained in the solid state by means of single-crystal X-ray diffraction analysis, and in solution by means of 1D and 2D COSY (183)W NMR. X-ray diffraction analysis revealed the presence of three attached aquo ligands on the central {W(6)O(15)} connecting core, generating three O=W...O=W-OH2 quasi-linear chains, which are responsible for the chirality of the trimeric assembly. This structural arrangement accounts for the 39-line (183)W solution spectrum. The 2D COSY spectrum permits reliable assignments of the six strongly shielded resonances (around -250 and -400 ppm) to the six central W atoms, as well as additional assignments. The origin of such strong shielding for these particular W atoms is discussed on the basis of previously published results. Infrared data for compounds 1, 3, and 4 are also presented.     

Investigating the in vitro metabolism of fipexide: characterization of reactive metabolites using liquid chromatography/mass spectrometry

The in vitro metabolism of the nootropic drug fipexide was studied using different liquid chromatography/mass spectrometry (LC/MS) techniques. This drug has been withdrawn from the market due to toxic effects. No previous reports have investigated the possible involvement of reactive metabolites in the toxicity of fipexide. The hydrolysis of this drug leads to the formation of two potentially toxic species, 3,4-methylenedioxybenzylpiperazine (MDBP) and 4-chlorophenoxyacetic acid (4-CPA). Here, we investigate the in vitro metabolism of fipexide in human, rat, mouse and dog, as well as of MDBP and 4-CPA in human and rat, while focusing on the formation of reactive metabolites. A combination of LC/MS analyses on a hybrid quadrupole-linear ion trap instrument and accurate mass data from QqTOF measurements was employed for the characterization of these metabolites. Microsomal metabolites of fipexide were MDBP, 4-CPA, fipexide N-oxide or hydroxyl, demethylenated fipexide and other minor ones, all of which were investigated by tandem mass spectrometry. Reactive metabolites were detected using several trapping procedures with small molecules such as glutathione, its ethyl ester derivative and N-acetylcysteine. The demethylenated metabolite, a catechol, formed its corresponding ortho-quinone, which readily reacts with these nucleophiles. MDBP was studied in a similar manner, due to its ability to form an analogous catechol. Because of its acidic nature, 4-CPA was assessed for possible acylglucuronide and acyl-CoA thioester metabolites, which could also be involved in bioactivation pathways. Several important metabolites were identified as potential mediators of toxicity via protein binding.     

Tuning the polarization along linear polyaromatic strands for rationally inducing mesomorphism in lanthanide nitrate complexes

The opposite orientation of the ester spacers in the rodlike ligands L 4C12 (benzimidazole-OOC-phenyl) and L 5C12 (benzimidazole-COO-phenyl) drastically changes the electronic structure of the aromatic systems, without affecting their meridional tricoordination to trivalent lanthanides, Ln(III), and their thermotropic liquid crystalline (i.e., mesomorphic) behaviors. However, the rich mesomorphism exhibited by the complexes [Ln(L 4C12)(NO3)3] (Ln=La-Lu) vanishes in [Ln(L 5C12)(NO3)3], despite superimposable molecular structures and comparable photophysical properties. Density functional theory (DFT) and time-dependant DFT calculations performed in the gas phase show that the inversion of the ester spacers has considerable effects on the electronic structure and polarization of the aromatic groups along the strands, which control residual intermolecular interactions responsible for the formation of thermotropic liquid-crystalline phases. As a rule of thumb, an alternation of electron-poor and electron-rich aromatic rings favors intermolecular interactions between the rigid cores and consequently mesomorphism, a situation encountered for L 4C12, L 5C12, [Ln(L 4C12)(NO3)3], but not for [Ln(L 5C12)(NO3)3]. The intercalation of an additional electron-rich diphenol ring on going from [Ln(L 5C12)(NO3)3] to [Ln(L 6C12)(NO3)3] restores mesomorphism despite an unfavorable orientation of the ester spacers, in agreement with our simple predictive model.     

Selective disaccharide binding by a macrotetracyclic receptor

A new carbohydrate receptor possesses a C3-symmetric polar cavity capable of encapsulating disaccharides; binding to beta-maltosyl is preferred, complementing previous systems which have favoured "all-equatorial" substrates.     

Alkyne creation in aliphatic polymers: influence of side groups

In this article, we focus on the influence of side groups on terminal alkyne creation, in aliphatic polymers submitted to swift heavy ions, under vacuum. Terminal alkyne creation was compared in polyethylene and in substituted polymers. We selected two classes of side groups: alkyl groups, which differed in their length (polypropylene and polybutene) and allyl groups, which were linear (EPDMh) or cyclic (EPDMn). Irradiated samples were analyzed using Fourier transform IR spectroscopy, in the transmission mode, at room temperature. Alkynes are created when the electronic stopping power, (dE/dx)e, exceeds a threshold value. This threshold value was moderately influenced by the presence of an alkyl side chain but was clearly reduced in the presence of C=C bonds on the side chain. Nevertheless, in all-saturated polymers, below the (dE/dx)e threshold, terminal alkyne formation is observed after a latent dose, rather independently of the side-chain length and directly related to the formation of radiation-induced double bonds prior to alkyne formation. Under S ion irradiation, the radiation chemical yield G0 value obtained in EPDMh was 4 times the value of G0 in PE. This effect is understandable only if important energy transfers, from the backbone to C=C double bonds, are considered.     

A general strategy for ligation of organic and biological molecules to Dawson and Keggin polyoxotungstates

The copper-catalyzed azide/alkyne cycloaddition (click chemistry) is used for the first time in polyoxometalate chemistry to graft any kind of organics (lipophilic, water-soluble, biologically relevant) to polyoxotungstates to generate hybrids. The method is not limited by solvent matching between the polyoxometallic platforms and the organic substrates.     

Modelling of the impedimetric responses of an aflatoxin B1 immunosensor prepared on an electrosynthetic polyaniline platform

Aflatoxins are a group of mycotoxins that have deleterious effects on humans and are produced during fungal infection of plants or plant products. An electrochemical immunosensor for the determination of aflatoxin B₁ (AFB₁) was developed with AFB₁antibody (AFB₁-Ab) immobilized on Pt electrodes modified with polyaniline (PANi) and polystyrene sulphonic acid (PSSA). Impedimetric analysis shows that the electron transfer resistances of the Pt/PANi–PSSA electrode, the Pt/PANi–PSSA/AFB₁-Ab immunosensor and Pt/PANi–PSSA/AFB₁-Ab incubated in bovine serum albumin (BSA) were 0.458, 720 and 1,066 kΩ, respectively. These results indicate that electrochemical impedance spectroscopy (EIS) is a suitable method for monitoring the change in electron transfer resistance associated with the immobilization of the antibody. Modelling of EIS data gave equivalent circuits which showed that the electron transfer resistance increased from 0.458 kΩ for the Pt/PANi–PSSA electrode to 1,066 kΩ for the Pt/PANi–PSSA/AFB₁-Ab immunosensor, indicating that immobilization of the antibody and incubation in BSA introduced an electron transfer barrier. The AFB₁ immunosensor had a detection limit of 0.1 mg/L and a sensitivity of 869.6 kΩ L/mg.     

Structured assemblies of ferromagnetic particles through covalent immobilization on functionalized polymer surfaces obtained by surface segregation

We report a strategy to immobilize magnetic particles on polymer surfaces in an organized manner. Surface segregation of binary polymer blends provided surfaces with the desired chemical functions (carboxylic functions). These functional groups were demonstrated to be accessible and were thus able to react with magnetic particles functionalized with amine functions. The presence of a magnetic field during the covalent attachment step in direct surface patterning produced particle chains oriented parallel to the field.     

Double plasma treatment-induced graft polymerization of carbohydrated monomers on poly(ethylene terephthalate) fibers

This study deals with the grafting of carbohydrate monomers on poly(ethylene terephthalate) fibers by double argon plasma treatment. Two monomers were used: allyl alpha-D-galactopyranoside and 2-methacryloxyethyl glucoside. The quantity of grafted carbohydrates was determined by phenol/sulfuric acid colorimetric titration. The graft density was observed to vary according to the monomer used. Allyl alpha-D-galactopyranoside yields to smaller graft densities compared to 2-methacryloxyethyl glucoside, suggesting transfer reactions occurring at the surface with allyl alpha-D-galactopyranoside. Fibers with the highest graft levels were obtained with the higher monomer concentration and the lower quantity of fiber treated in a plasma reactor. The grafting density can be modulated by the monomer concentration and mass of fiber exposed in the plasma reactor. For 0.5 mg of fibers, the graft densities for 23 and 68 mM allyl alpha-D-galactopyranoside are, respectively, 18 and 35 nmol/cm2. For 0.5 mg of fibers, the graft densities for 19 and 38 mM 2-methacryloxyethyl glucoside are, respectively, 150 and 250 nmol/cm2. Comparative study without the preactivation treatment shows the efficiency of the preactivation: for a mass of fiber of 0.5 mg and a 2-methacryloxyethyl glucoside concentration of 38 mM, the grafting density without plasma pretreatment is 38 nmol/cm2. Attenuated total reflectance Fourier transform infrared spectra confirmed the anchoring of the glycopolymer onto the poly(ethylene terephthalate) surfaces. Atomic force microscopy and scanning electronic microscopy pictures indicated their morphological changes.     

Structure of liquid films of an ordered foam confined in a narrow channel

A bamboo foam is the simplest case of an ordered foam confined in a narrow channel. It is made of a regular film distribution, arranged perpendicularly to the channel. Our work consists of studying the structural properties of several films taken in a drained foam. X-ray experiments highlighted the equality of the equilibrium thickness for each film within a foam. The same thickness was found as by measurements of disjoining pressure isotherms, proving as well that films of a bamboo foam behave like isolated ones. The refinement of X-ray data by a simple model of specular reflectivity showed a significant variation of the electronic distribution of the surfactant layer for a common black film forwarding from one equilibrium state to another. A discussion on the organization of the surfactant molecules to the gas/liquid interface and film is proposed.