Enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox): synthesis, scope and copolymerization with styrene

The design of a synthetic route to a class of enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox) is presented. The condensation of a lithium silylphosphide and a ketone (the phospha-Peterson reaction) was used as the P=C bond-forming step. Attempted condensation of PhC(=O)Ox (Ox = CNOCH(iPr)CH(2)) and MesP(SiMe(3))Li gave the unusual heterocycle (MesP)(2)C(Ph)=CN-(S)-CH(iPr)CH(2)O (3). However, PhAk-Ox (S,E)-MesP=C(Ph)CMe(2)Ox (1?a) was successfully prepared by treating MesP(SiMe(3))Li with PhC(=O)CMe(2)Ox (52?%). To demonstrate the modularity and tunability of the phospha-Peterson synthesis several other phosphaalkene-oxazolines were prepared in an analogous manner to 1?a: TripP=C(Ph)CMe(2)Ox (1?b; Trip = 2,4,6-triisopropylphenyl), 2-iPrC(6)H(4)P=C(Ph)CMe(2)Ox (1?c), 2-tBuC(6)H(4)P=C(Ph)CMe(2)Ox (1?d), MesP=C(4-MeOC(6)H(4))CMe(2)Ox (1?e), MesP=C(Ph)C(CH(2))(4)Ox (1?f), and MesP=C(3,5-(CF(3))(2)C(6)H(3))C(CH(2))(4)Ox (1?g). To evaluate the PhAk-Ox compounds as prospective precursors to chiral phosphine polymers, monomer 1?a and styrene were subjected to radical-initiated copolymerization conditions to afford [{MesPC(Ph)(CMe(2)Ox)}(x){CH(2)CHPh}(y)](n) (9?a: x = 0.13n, y = 0.87n; GPC: M(w) = 7400?g mol(-1) , PDI = 1.15).     

“In situ” extraction of essential oils by use of Dean–Stark glassware and a Vigreux column inside a microwave oven: a procedure for teaching green analytical chemistry

One of the principal objectives of sustainable and green processing development remains the dissemination and teaching of green chemistry in colleges, high schools, and academic laboratories. This paper describes simple glassware that illustrates the phenomenon of extraction in a conventional microwave oven as energy source and a process for green analytical chemistry. Simple glassware comprising a Dean-Stark apparatus (for extraction of aromatic plant material and recovery of essential oils and distilled water) and a Vigreux column (as an air-cooled condenser inside the microwave oven) was designed as an in-situ extraction vessel inside a microwave oven. The efficiency of this experiment was validated for extraction of essential oils from 30 g fresh orange peel, a by-product in the production of orange juice. Every laboratory throughout the world can use this equipment. The microwave power is 100 W and the irradiation time 15 min. The method is performed at atmospheric pressure without added solvent or water and furnishes essential oils similar to those obtained by conventional hydro or steam distillation. By use of GC-MS, 22 compounds in orange peel were separated and identified; the main compounds were limonene (72.1%), β-pinene (8.4%), and γ-terpinene (6.9%). This procedure is appropriate for the teaching laboratory, does not require any special microwave equipment, and enables the students to learn the skills of extraction, and chromatographic and spectroscopic analysis. They are also exposed to a dramatic visual example of rapid, sustainable, and green extraction of an essential oil, and are introduced to successful sustainable and green analytical chemistry.     

Cancerous cell death from sensitizer free photoactivation of singlet oxygen

Singlet oxygen ((1)O(2)) is an electronic state of molecular oxygen which plays a major role in many chemical and biological photo-oxidation processes. It has a high chemical reactivity which is commonly harnessed for therapeutic issues. Indeed, (1)O(2) is believed to be the major cytotoxic agent in photodynamic therapy. In this treatment of cancer, (1)O(2) is created, among other reactive species, by an indirect transfer of energy from light to molecular oxygen via excitation of a photosensitizer (PS). This PS is believed to be necessary to obtain an efficient (1)O(2) production. In this paper, we demonstrate that production of (1)O(2) is achieved in living cells from PS-free 1270 nm laser excitation of molecular oxygen. The quantity of (1)O(2) produced in this way is sufficient to induce an oxidative stress leading to cell death. Other effects such as thermal stress are discriminated and we conclude that cell death is only due to (1)O(2) creation. This new simplified scheme of (1)O(2) activation can be seen as a breakthrough for phototherapies of malignant diseases and/or as a noninvasive possibility to generate reactive oxygen species in a tightly controlled manner.     

Finding MOFs for highly selective CO2/N2 adsorption using materials screening based on efficient assignment of atomic point charges

Electrostatic interactions are a critical factor in the adsorption of quadrupolar species such as CO(2) and N(2) in metal-organic frameworks (MOFs) and other nanoporous materials. We show how a version of the semiempirical charge equilibration method suitable for periodic materials can be used to efficiently assign charges and allow molecular simulations for a large number of MOFs. This approach is illustrated by simulating CO(2) and N(2) adsorption in ~500 MOFs; this is the largest set of structures for which this information has been reported to date. For materials predicted by our calculations to have promising adsorption selectivities, we performed more detailed calculations in which accurate quantum chemistry methods were used to assign atomic point charges, and molecular simulations were used to assess molecular diffusivities and binary adsorption isotherms. Our results identify two MOFs, experimentally known to be stable upon solvent removal, that are predicted to show no diffusion limitations for adsorbed molecules and extremely high CO(2)/N(2) adsorption selectivities for CO(2) adsorption from dry air and from gas mixtures typical of dry flue gas.     

Nature and structure of aluminum surface sites grafted on silica from a combination of high-field aluminum-27 solid-state NMR spectroscopy and first-principles calculations

The determination of the nature and structure of surface sites after chemical modification of large surface area oxides such as silica is a key point for many applications and challenging from a spectroscopic point of view. This has been, for instance, a long-standing problem for silica reacted with alkylaluminum compounds, a system typically studied as a model for a supported methylaluminoxane and aluminum cocatalyst. While (27)Al solid-state NMR spectroscopy would be a method of choice, it has been difficult to apply this technique because of large quadrupolar broadenings. Here, from a combined use of the highest stable field NMR instruments (17.6, 20.0, and 23.5 T) and ultrafast magic angle spinning (>60 kHz), high-quality spectra were obtained, allowing isotropic chemical shifts, quadrupolar couplings, and asymmetric parameters to be extracted. Combined with first-principles calculations, these NMR signatures were then assigned to actual structures of surface aluminum sites. For silica (here SBA-15) reacted with triethylaluminum, the surface sites are in fact mainly dinuclear Al species, grafted on the silica surface via either two terminal or two bridging siloxy ligands. Tetrahedral sites, resulting from the incorporation of Al inside the silica matrix, are also seen as minor species. No evidence for putative tri-coordinated Al atoms has been found.     

Characterization of phospholipid bilayer formation on a thin film of porous SiO2 by reflective interferometric Fourier transform spectroscopy (RIFTS)

Classical methods for characterizing supported artificial phospholipid bilayers include imaging techniques such as atomic force microscopy and fluorescence microscopy. The use in the past decade of surface-sensitive methods such as surface plasmon resonance and ellipsometry, and acoustic sensors such as the quartz crystal microbalance, coupled to the imaging methods, have expanded our understanding of the formation mechanisms of phospholipid bilayers. In the present work, reflective interferometric Fourier transform spectrocopy (RIFTS) is employed to monitor the formation of a planar phospholipid bilayer on an oxidized mesoporous Si (pSiO(2)) thin film. The pSiO(2) substrates are prepared as thin films (3 μm thick) with pore dimensions of a few nanometers in diameter by the electrochemical etching of crystalline silicon, and they are passivated with a thin thermal oxide layer. A thin film of mica is used as a control. Interferometric optical measurements are used to quantify the behavior of the phospholipids at the internal (pores) and external surfaces of the substrates. The optical measurements indicate that vesicles initially adsorb to the pSiO(2) surface as a monolayer, followed by vesicle fusion and conversion to a surface-adsorbed lipid bilayer. The timescale of the process is consistent with prior measurements of vesicle fusion onto mica surfaces. Reflectance spectra calculated using a simple double-layer Fabry-Perot interference model verify the experimental results. The method provides a simple, real-time, nondestructive approach to characterizing the growth and evolution of lipid vesicle layers on the surface of an optical thin film.     

Ruthenium-vinylhelicenes: remote metal-based enhancement and redox switching of the chiroptical properties of a helicene core

Introducing metal-vinyl ruthenium moieties onto [6]helicene results in a significant enhancement of the chiroptical properties due to strong metal-ligand electronic interactions. The electro-active Ru centers allow the achievement of the first purely helicene-based redox-triggered chiroptical switches. A combination of electrochemical, spectroscopic, and theoretical techniques reveals that the helicene moiety is a noninnocent ligand bearing a significant spin density.     

Shape-dependent electrocatalysis: formic acid electrooxidation on cubic Pd nanoparticles

The electrocatalytic properties of palladium nanocubes towards the electrochemical oxidation of formic acid were studied in H(2)SO(4) and HClO(4) solutions and compared with those of spherical Pd nanoparticles. The spherical and cubic Pd nanoparticles were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The intrinsic electrocatalytic properties of both nanoparticles were shown to be strongly dependent on the amount of metal deposited on the gold substrate. Thus, to properly compare the activity of both systems (spheres and nanocubes), the amount of sample has to be optimized to avoid problems due to a lower diffusion flux of reactants in the internal parts of the catalyst layer resulting in a lower apparent activity. Under the optimized conditions, the activity of the spheres and nanocubes was very similar between 0.1 and 0.35 V. From this potential value, the activity of the Pd nanocubes was remarkably higher. This enhanced electrocatalytic activity was attributed to the prevalence of Pd(100) facets in agreement with previous studies with Pd single crystal electrodes. The effect of HSO(4)(-)/SO(4)(2-) desorption-adsorption was also evaluated. The activity found in HClO(4) was significantly higher than that obtained in H(2)SO(4) in the whole potential range.     

Electrochemical Properties and ESR Characterization of Mixed Valence alpha-[XMo(3)(-)(x)()V(x)()W(9)O(40)](n)()(-) Heteropolyanions with X = P(V) and Si(IV), x = 1, 2, or 3

Electrochemical behavior of the alpha-[SiMo(3)(-)(x)()V(x)()W(9)O(40)]((4+)(x)()())(-) and alpha-[PMo(3)(-)(x)()V(x)()W(9)O(40)]((3+)(x)()())(-) anions with x = 1, 2, or 3 were studied. Electrochemical reduction of each compounds was consistent with its Mo/V ratio, reduction of vanadium and molybdenum atoms occurring in the +0.6 to -0.6 V potential range. The one-electron-reduced species were prepared by electrolysis and then characterized by ESR spectroscopy. The g and A values for V(4+)ions appeared to depend on the nature of the surrounding atoms (Mo(VI), W(VI), and V(V)). In solution at 330 K, the ESR spectrum of the protonated alpha-H[SiMoV(IV)VW(9)O(40)](6)(-) anion displayed 29 superhyperfine lines which were related to the partial localization of the electron on one vanadium nucleus. The ESR spectra at room temperature for the divanadium-substituted anions showed a strong anisotropy of the A tensor which would be related to the electron transfer along a preferential axis. An isolated V(4+) signal was not observed, even at 12 K, indicating that the electron is never firmly trapped on one single vanadium atom.     

Zanthoxylum Species: A Comprehensive Review of Traditional Uses,Phytochemistry, Pharmacological and Nutraceutical Applications

Zanthoxylum species (Syn. Fagara species) of the Rutaceae family are widely used in many countries as food and in trado-medicinal practice due to their wide geographical distribution and medicinal properties. Peer reviewed journal articles and ethnobotanical records that reported the traditional knowledge, phytoconstituents, biological activities and toxicological profiles of Z. species with a focus on metabolic and neuronal health were reviewed. It was observed that many of the plant species are used as food ingredients and in treating inflammation, pain, hypertension and brain diseases. Over 500 compounds have been isolated from Z. species, and the biological activities of both the plant extracts and their phytoconstituents, including their mechanisms of action, are discussed. The phytochemicals responsible for the biological activities of some of the species are yet to be identified. Similarly, biological activities of some isolated compounds remain unknown. Taken together, the Z. species extracts and compounds possess promising biological activities and should be further explored as potential sources of new nutraceuticals and drugs.