Development of novel composite sorbents for the removal of actinides from environmental and analytical solutions

A novel approach to preparing granular sorbents for the separation of actinides has been developed, where the extractant is directly immobilized in an inert matrix. This allows substantially higher extractant loadings in the sorbent than for conventional extraction chromatography resins. This approach utilizes polyacrylonitrile (PAN) as the inert matrix material. The well-known actinide extractant octyl (phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) has been loaded into sorbent granules at extractant loadings from 20 to 33 wt.% CMPO. The porosity of the PAN matrix allows the active material to have rapid and complete access to the solution containing the impurities, resulting in improved kinetics and higher sorption capacities. Sorbents containing CMPO were prepared using PAN as a binding matrix, and tested against commercially available actinide extraction chromatography resins. Direct comparative batch contact tests performed with TRU-Resin^Ò and CMPO-PAN using an INEEL tank waste simulant, resulting in distribution coefficient (K _d) values for Am approximately 2-90 times higher for CMPO-PAN than for TRU-Resin. Batch distribution coefficient (K _d) values for Pu were approximately 60-150 times higher for CMPO-PAN than for the TRU-Resin. Acid dependency curves were generated for Am and Pu with CMPO-PAN over a concentration range of 1 mM to 5M HNO₃.     

Short total synthesis of 8,10-di-O-methylbergenin

[reaction: see text] A short, high-yielding synthesis of the C-glucoside 8,10-di-O-methylbergenin is reported. Key elements of the synthesis are a stereoselective installation of a beta-C-aryl linkage, a palladium(0)-catalyzed aryl carbonylation, and a regioselective lactonization reaction. This pathway should allow access to a host of bergenin analogues.     

Repulsive Casimir forces

We discuss repulsive Casimir forces between dielectric materials with nontrivial magnetic susceptibility. It is shown that considerations based on the naive pairwise summation of van der Waals and Casimir-Polder forces may not only give an incorrect estimate of the magnitude of the total Casimir force but even the wrong sign of the force when materials with high dielectric and magnetic responses are involved. Indeed repulsive Casimir forces may be found in a large range of parameters, and we suggest that the effect may be realized in known materials. The phenomenon of repulsive Casimir forces may be of importance both for experimental study and for nanomachinery applications.     

Extremely low vertical-emittance beam in the accelerator test facility at KEK

Electron beams with the lowest, normalized transverse emittance recorded so far were produced and confirmed in single-bunch-mode operation of the Accelerator Test Facility at KEK. We established a tuning method of the damping ring which achieves a small vertical dispersion and small x-y orbit coupling. The vertical emittance was less than 1% of the horizontal emittance. At the zero-intensity limit, the vertical normalized emittance was less than 2.8 x 10(-8) rad m at beam energy 1.3 GeV. At high intensity, strong effects of intrabeam scattering were observed, which had been expected in view of the extremely high particle density due to the small transverse emittance.     

Final state interactions in deuteron breakup by protons at 585 and 800 MeV

Neutron-proton final state interactions (FSI) were observed in the deuteron breakup reaction ²H(p, 2p)n-via a kinematically complete experiment at incident proton energies of 585 and 800 MeV. Kinematic conditions were chosen which allowed the final state proton and neutron to have small relative energies; data were taken at four proton c.m. scattering angles at 800 MeV, ranging from 71° to 119° and at 94° and 106° at 585 MeV. The data are analyzed in terms of the Goldberger-Watson formalism for final state interactions, and the individual contributions of the ¹S₀ and ³S₁ np states are determined. The ${}^3\text{S}{}_1{}^1\text{S}{}_0$ ratio is large, as expected from some reaction models. The ratio of ³S₁ (almost elastic) to pd elastic cross sections is in good agreement with FSI analysis.     

The mechanistic origin of regiochemical changes in the nitrosative N-dealkylation of N,N-dialkyl aromatic amines

The regioselectivity of the nitrous acid mediated dealkylation of 4-substituted-N-ethyl-N-methylanilines is a function of the acidity of the reaction mixture. At high acidity deethylation predominates, whereas demethylation is the predominant reaction in nitrosamine formation at pH 2 and above. In some cases the regioselectivity of nitrosative dealkylation changes as the run proceeds. Through the use of the corresponding 4-nitroaniline as the primary substrate, CIDNP, kinetics, kinetic deuterium isotope effects and other transformations involving nitrosations with NO2 or NOBF4 in aprotic solvents, a new mechanism of tertiary amine nitrosation has been deduced and proposed to explain regioselective deethylation. The mechanism involves the oxidation of the substrate to the amine radical cation by NO+. This is followed by the abstraction of a hydrogen atom from the carbon adjacent to the amine nitrogen by NO2 to produce an iminium ion which reacts further to produce the corresponding aldehyde and the nitrosamine. Depending upon the acidity, this process competes with three other mechanistic pathways, two of which give the nitrosamine through the iminium ion, and one leads to the formation of C-nitro compounds. The competing pathways to nitrosamine formation involve NOH elimination from a nitrosammonium ion and deprotonation of the radical cation to give an alpha-amino radical which rapidly oxidized to the iminium ion. Predominant, but not highly regioselective demethylation occurs by these pathways. Nitro compound formation principally arises from the reaction of NO2 with the radical cation followed by deprotonation, but also occurs by para C-nitrosation followed by oxidation.