Fluorescent nanocrystals grown in sol–gel thin films for generic stable and sensitive sensors

Through the sol–gel route, we have well-controlled the preparation of fluorescent organic nanocrystals grown in silicate thin films. This process is based on the confined nucleation and growth of dyes in the pores of wet gels. The resulting nanocomposite sol–gel thin films, coated onto low-cost substrates, exhibit coupled properties: transparency, stability, easy shaping of sol–gel thin films and high fluorescence intensity coming from organic nanocrystals. The sensitivity of the fluorescence intensity of nanocrystals to their environments can be exploited for the development of optical sensors. Indeed, Förster Resonance Energy Transfer can inhibit nanocrystal fluorescence when probe molecules are adsorbed or grafted on the nanocrystal surface after their diffusion through the pores of the sol–gel matrix. We investigated by time-resolved fluorescence spectroscopy the effect of nanocrystal size and probe concentration on the fluorescence quenching in presence of Methylene Blue used in this study as molecular probe. As strong fluorescence quenchings can be achieved, even for low probe concentrations, these hybrid organic–inorganic nanocoposites are promising for the development of sensor devices by increasing their fluorescence contrasts under specific chemical or biological environments.     

Deprotonative metalation of chloro- and bromopyridines using amido-based bimetallic species and regioselectivity-computed CH acidity relationships

A series of chloro- and bromopyridines have been deprotometalated by using a range of 2,2,6,6-tetramethylpiperidino-based mixed lithium-metal combinations. Whereas lithium-zinc and lithium-cadmium bases afforded different mono- and diiodides after subsequent interception with iodine, complete regioselectivities were observed with the corresponding lithium-copper combination, as demonstrated by subsequent trapping with benzoyl chlorides. The obtained selectivities have been discussed in light of the CH acidities of the substrates, determined both in the gas phase and as a solution in THF by using the DFT B3LYP method.     

Oxidation of Zn(Cys)4 zinc finger peptides by O2 and H2O2: products, mechanism and kinetics

The reactivity of a series of Zn(Cys)(4) zinc finger model peptides towards H(2)O(2) and O(2) has been investigated. The oxidation products were identified by HPLC and ESI-MS analysis. At pH<7.5, the zinc complexes and the free peptides are oxidised to bis-disulfide-containing peptides. Above pH 7.5, the oxidation of the zinc complexes by H(2)O(2) also yields sulfinate- and sulfonate-containing overoxidised peptides. At pH 7.0, monitoring of the reactions between the zinc complexes and H(2)O(2) by HPLC revealed the sequential formation of two disulfides. Several techniques for the determination of the rate constant for the first oxidation step corresponding to the attack of H(2)O(2) by the Zn(Cys)(4) site have been compared. This rate constant can be reliably determined by monitoring the oxidation by HPLC, fluorescence, circular dichroism or absorption spectroscopy in the presence of excess ethyleneglycol bis(2-aminoethyl ether)tetraacetic acid. In contrast, monitoring of the release of zinc with 4-(2-pyridylazo)resorcinol or of the thiol content with 5,5'-dithiobis(2-nitrobenzoate) did not yield reliable values of this rate constant for the case in which the formation of the second disulfide is slower than the formation of the first. The kinetic measurements clearly evidence a protective effect of zinc on the oxidation of the cysteines by both H(2)O(2) and O(2), which points to the fact that zinc binding diminishes the nucleophilicity of the thiolates. In addition, the reaction between the zinc finger and H(2)O(2) is too slow to consider zinc fingers as potential sensors for H(2)O(2) in cells.     

Water behavior in mesoporous materials as studied by NMR relaxometry

Water in mesoporous materials possessing a two-dimensional hexagonal structure has been studied by the variation of its NMR longitudinal relaxation time T(1) as a function of the static magnetic field value, or equivalently of the NMR measurement frequency. This technique, dubbed relaxometry, has been applied from 5 kHz (measurement frequency) up to 400 MHz with various instruments including a variable-field spectrometer operating between 8 and 90 MHz. Moreover, the range 0-5 kHz could be investigated by transverse relaxation, T(2) denoting the corresponding relaxation time, and relaxation in the rotating frame, T(1ρ) denoting the corresponding relaxation time. Measurements of proton relaxation rates (inverse of relaxation times) have been performed with H(2)O and HOD (residual protons of heavy water) at water volumes of 80%, 60%, and 40% relative to the porous volume. Comparison between H(2)O and HOD shows clearly that, above 1 MHz where both sets of data are superposed, relaxation is purely intermolecular and due to paramagnetic relaxation (dipolar interactions of water protons with unpaired electrons of paramagnetic entities). Below 1 MHz, it is possible to subtract the intermolecular contribution (given by HOD data) from H(2)O data so that one is left with intramolecular relaxation which is solely due to water reorientational motions. The analysis of these low-frequency data (in terms of Lorentzian functions) reveals two types of water within the pores: one interacting strongly with the surface and the other corresponding to a second layer. High-frequency data, which arise from paramagnetic relaxation, exhibit again two types of water. Due to their correlation times, one type is assigned to relatively free water within the pores while the other type corresponds to bulk (interparticular) water. Their proportions, given as a function of the volume fraction, are consistent with the above assignments.     

A simple copper-catalyzed synthesis of tertiary acyclic amides

The N-arylation of aromatic and aliphatic secondary acyclic amides, known to be poor nucleophiles, has been accomplished using a simple and cheap copper catalytic system. The corresponding tertiary acyclic amides, which can be found in numerous biologically active compounds, have been obtained in good to excellent yields.     

On the mechanism of the copper-mediated C-S bond formation in the intramolecular disproportionation of imine disulfides

The mechanism of the copper-mediated disproportionation of aromatic imine disulfides to benzothiazoles in the gas phase is investigated by experimental and theoretical methods. Application of infrared multiphoton dissociation and hydrogen/deuterium exchange experiments combined with density functional theory (DFT) calculations of the relevant molecular structures and the associated infrared spectra allows the identification of the observed ionic intermediates. The theoretical investigation of the possible reaction pathways supported by collision-induced dissociation experiments provides a consistent mechanistic picture of the reaction catalyzed by a single copper(I) ion. Activation of the substrate proceeds via homolytic sulfur-sulfur bond cleavage, yielding metal complexes in the formal +3 oxidation state; carbon-sulfur coupling and hydrogen-atom transfer complete the transformation to the products. Exploratory studies demonstrate that in the gas phase, the disproportionation of the imine disulfide can also be mediated by other metal ions via different either homo- or heterolytic mechanisms without involving high-valent intermediates.     

First efficient uncharged reactivators for the dephosphylation of poisoned human acetylcholinesterase

Nerve agents are highly toxic organophosphorus compounds with strong inhibition potency against acetylcholinesterase (AChE). Herein, we describe two first extremely promising uncharged reactivators for poisoned human AChE with a superior or similar in vitro ability to reactivate the enzyme as compared to that of HI-6, obidoxime, TMB-4 and HL?-7.     

Contribution from a hole-conducting dye to the photocurrent in solid-state dye-sensitized solar cells

The hole transporting medium in solid-state dye-sensitized solar cells can be utilized to harvest sunlight. Herein we demonstrate that a triphenylamine-based dye, used as hole-transporting medium, contributes to the photocurrent in a squaraine-sensitized solid-state dye-sensitized solar cell. Steady-state photoluminescence measurements have been used to distinguish between electron transfer and energy transfer processes leading to energy conversion upon light absorption in the hole-transporting dye.     

2D silver nanocrystal ordering modulated by various substrates and revealed using oxygen plasma treatment

Here, 5 nm Ag nanocrystals are deposited, using the same procedure, on various substrates differing by their rms roughness, wetting properties and nanoparticle-substrate interactions leading, consequently, to different nanocrystal orderings. Theoretical calculations are carried out to understand how these parameters influence the size of the nanocrystal organizations on the substrate surface. When these nanocrystal arrays are subjected to an oxygen plasma treatment, the nanocrystals perfectly assembled in hexagonal networks remain intact, while the nanocrystals that are not well-packed coalesce to form larger particles independently on the used substrate. This phenomenon is observed on the entire substrate surface. This procedure gives an innovative way of using oxygen plasma generated by the reactive ion etching technique, as a new method to reveal defects in 2D Ag nanocrystal self-assemblies.     

A Hall effect without well-defined quasiparticles

Using a simple model of long-range impurity scattering, we illustrate how different transport and Hall relaxation rates may arise when the electron quasiparticle picture breaks down. We show how a broad and incoherent spectral function requires the use of a quantum version of the Boltzmann equation. This leads to unusual transport properties, in particular, a Hall relaxation rate which is independent of the quasiparticle scattering rate.