A Bus Driver Scheduling Problem: a?new mathematical model and a GRASP approximate solution

This paper addresses the problem of determining the best scheduling for Bus Drivers, a $\mathcal{NP}$ -hard problem consisting of finding the minimum number of drivers to cover a set of Pieces-Of-Work (POWs) subject to a variety of rules and regulations that must be enforced such as spreadover and working time. This problem is known in literature as Crew Scheduling Problem and, in particular in public transportation, it is designated as Bus Driver Scheduling Problem. We propose a new mathematical formulation of a Bus Driver Scheduling Problem under special constraints imposed by Italian transportation rules. Unfortunately, this model can only be usefully applied to small or medium size problem instances. For large instances, a Greedy Randomized Adaptive Search Procedure (GRASP) is proposed. Results are reported for a set of real-word problems and comparison is made with an exact method. Moreover, we report a comparison of the computational results obtained with our GRASP procedure with the results obtained by Huisman et al. (Transp. Sci. 39(4):491?C502, 2005).     

Surface Functionalization of Face Masks with Cold Plasma and Its Effect in Anchoring Polyphenols Extracted from Agri-Food

To improve the capability of non-woven polypropylene-based fabric (NWF-PP) used for face mask production to retain active biomolecules such as polyphenols, the surface functionalization of NWF-PP–directly cut from face masks–was carried out by employing cold plasma with oxygen. The nature/structure of the functional groups, as well as the degree of functionalization, were evaluated by ATR-FTIR and XPS by varying the experimental conditions (generator power, treatment time, and oxygen flow). The effects of plasma activation on mechanical and morphological characteristics were evaluated by stress–strain measurements and SEM analysis. The ability of functionalized NWF-PP to firmly anchor polyphenols extracted from cloves was estimated by ATR-FTIR analysis, IR imaging, extractions in physiological solution, and OIT analysis (before and after extraction), as well as by SEM analysis. All the results obtained converge in showing that, although the plasma treatment causes changes–not only on the surface–with certain detriment to the mechanical performance of the NWF-PP, the incorporated functionalities are able to retain/anchor the active molecules extracted from the cloves, thus stabilizing the treated surfaces against thermo-oxidation even after prolonged extraction.     

Optimization of Lipid Extraction from Spirulina spp. by Ultrasound Application and Mechanical Stirring Using the Taguchi Method of Experimental Design

The present study uses the Taguchi method of experimental design to optimize lipid extraction from Spirulina spp. by ultrasound application and mechanical stirring. A Taguchi L₉ orthogonal array was used to optimize various parameters, such as methanol: chloroform (M:C) ratio, biomass: solvent ratio, and extraction time for lipid extraction. The results were analyzed using the signal-to-noise (S/N) ratio and analysis of variance (ANOVA). The biomass: solvent ratio significantly influenced lipid content (p < 0.05) with 92.1% and 92.3% contributions to the lipid and S/N ratio data, respectively. The extraction time presented a contribution value of 5.0%, while the M:C ratio presented the most negligible contribution of 0.4% for S/N data. The optimum extraction conditions were: M:C ratio of 1:1, biomass: solvent ratio of 1:60, and extraction time of 30 min. The predominant fatty acids were palmitic acid (44.5%), linoleic acid (14.9%), and gamma-linolenic acid (13.4%). The confirmation experiments indicated a lipid content of 8.7%, within a 95% confidence interval, proving the Taguchi method’s effectiveness in optimizing the process parameters for lipid extraction.     

Determination of benzotrifluoride derivative compounds in groundwater

Two simple analytical methods for the simultaneous determination and quantification of benzotrifluoride and eight chlorinated, amino and nitro benzotrifluoride derivatives in groundwater are proposed. Benzotrifluoride, 4-chlorobenzotrifluoride, 2,4-dichlorobenzotrifluoride and 3,4-dichlorobenzotrifluoride, were extracted by Purge-and-Trap on the basis of their volatile properties, while 3-aminobenzotrifluoride, 4-nitrobenzotrifluoride, 3-amino-4-chlorobenzotrifluoride, 3-nitro-4-chlorobenzotrifluoride and 4-chloro-3,5-dinitrobenzotrifluoride extractions were done with an automated SPE system. The analytical separations and detections were performed with two different GC systems, both equipped with single quadrupole mass spectrometer as detector. The LOD ranges for the two methods were 0.002–0.005 μg L⁻¹ and 0.01–0.07 μg L⁻¹, respectively. Both extraction methods were developed using spiked Milli-Q water and were then demonstrated with groundwater samples collected during autumn 2008. The areas of groundwater collection were polluted due to an episode of improper industrial soil disposal and consequent leakage of aliphatic and aromatic, fluorinated chemicals into the groundwater. This work eventually revealed the presence of several benzotrifluoride compounds most of them, like dichloro- and amino-derivatives, never been reported as environmental contaminants.     

First evaluation of the thermodynamic properties for spheres to elongated micelles transition of some propanediyl-alpha,omega-bis(dimethylalkylammonium bromide) surfactants in aqueous solution

The apparent and partial molar enthalpies, apparent molar volumes, and adiabatic compressibilities at 298 K of the aqueous solutions of the cationic gemini surfactants propanediyl-alpha,omega-bis(octyldimethylammonium bromide) (8-3-8) and propanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) (12-3-12) have been measured as a function of concentration. The trends of the partial molar enthalpies versus concentration are the first well documented thermodynamic evidence of sphere to rod transition in the micellar phase, involving a detectable quantity of heat, and allow the determination of the change in enthalpy associated with this transition. The changes in enthalpies upon micellization and for the sphere to elongated micelles transition, DeltaH(s)(-->)(r), have been obtained from the experimental data by using a pseudo-phase transition approach: -1.5 kJ mol(-1) for 8-3-8 and -3.9 kJ mol(-1) for 12-3-12. No evidence of the above transition is found in the trends of volumetric properties versus m. The apparent adiabatic molar compressibilities for the compounds under investigation are also reported here for the first time: a negative group contribution for the methylene group is evaluated, when the surfactants are present in solution as a single molecule, reflecting its solvation structure. In the micellar phase, the -CH(2)- group contribution becomes positive. A value of 1.17 x 10(-3) cm(3) bar(-1) mol(-1) for the change in adiabatic molar compressibility upon micellization is obtained. The lower values of the methylene group contributions to the volumetric properties for the monomers support the hypothesis of partial association of the chains before the cmc.     

On the applicability of the HSAB principle through the use of improved computational schemes for chemical hardness evaluation

Finite difference schemes, named Compact Finite Difference Schemes with Spectral-like Resolution, have been used for a less crude approximation of the analytical hardness definition as the second-order derivative of the energy with respect to the electron number. The improved computational schemes, at different levels of theory, have been used to calculate global hardness values of some probe bases, traditionally classified as hard and soft on the basis of their chemical behavior, and to investigate the quantitative applicability of the HSAB principle. Exchange acid-base reactions have been used to test the HSAB principle assuming the reaction energies as a measure of the stabilization of product adducts.     

A new,improved sensor for ascorbate determination at copper hexacyanoferrate modified carbon film electrodes

A new, improved sensor for the electrocatalytic determination of ascorbate has been developed that has both a low applied operating potential and a low detection limit. The sensor was constructed by depositing copper hexacyanoferrate film either electrochemically or chemically onto carbon film electrode, and it was then characterised by cyclic voltammetry and electrochemical impedance spectroscopy. Chemically deposited films were shown to be the best for ascorbate determination and were used as an amperometric sensor at +0.05 V versus SCE to determine ascorbate in wines and juice. The linear range extended to 5 mM with a limit of detection of 2.1 M, the sensor was stable for more than four months, and it could be used continuously for at least 20 days.