Quantification of arecoline (areca nut alkaloid) in neonatal biological matrices by high-performance liquid chromatography/electrospray quadrupole mass spectrometry

A high-performance liquid chromatography (HPLC) method with mass spectrometric detection is described for determination of arecoline in newborn meconium, urine and cord serum, using pilocarpine as internal standard. The analytes were extracted from neonatal biological matrices with chloroform/isopropanol (95:5, v/v) at alkaline pH. Extracts were analyzed by HPLC coupled to an electrospray (ESI) interface and a quadrupole mass spectrometer. Chromatography was performed on a C(8) reversed-phase column using 10 mM ammonium acetate (pH 4.3)/acetonitrile (90:10, v/v) as mobile phase. The mass spectrometer was operated in selected ion monitoring mode. The method was validated over the concentration range 0.005-1.00 micro g/g meconium, 0.004-1.00 micro g/mL cord serum and 0.001-1.00 micro /mL urine. Mean recoveries ranged between 86.5 and 90.7% for arecoline in the different biological matrices, with precision always better than 10%. The quantification limits of arecoline were 0.005 micro g/g meconium, 0.004 micro g/mL cord serum, and 0.001 micro g/mL urine. The method was applied to the analysis of neonatal biological matrices to assess eventual fetal exposition to arecoline. Two newborns from Asian mothers who declared areca nut consumption presented arecoline in meconium with concentrations in the range 0.006-0.008 micro g/g; also the urine from one neonate tested positive for the drug.     

Ethylene glycol‐based ionic liquids via azide/alkyne click chemistry

A facile synthetic route for the preparation of dicationic ethylene glycol based‐ionic liquids (ILs) via the azide/alkyne “click” reaction is presented. The copper(I) catalyzed, microwave‐assisted azide/alkyne “click” reaction between diazido‐ethylene glycols and the corresponding alkyne containing IL‐head group enables a simple preparation of different sets of poly(ethylene glycol)‐based ILs. Beside tetra‐ and hexa(ethylene glycol)‐based ILs, also oligomeric (M_n = 400 g/mol) and polymeric ILs (M_n up to 1550 g/mol) could be prepared in good yield and with full conversion of the ionic head group. The prepared ILs were extensively characterized via NMR spectroscopy and ESI‐time‐of‐flight (TOF) mass spectroscopy, revealing the formation of multiply charged ions in the negative mode. Thermal stability proved to be exceptionally high (up to 300 °C) together with low glass‐transition temperatures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Flow injection-chemical vapor generation atomic fluorescence spectrometry hyphenated system for organic mercury determination: A step forward

Monomethylmercury and ethylmercury were determined on line using flow injection-chemical vapor generation atomic fluorescence spectrometry without neither requiring a pre-treatment with chemical oxidants, nor UV/MW additional post column interface, nor organic solvents, nor complexing agents, such as cysteine. Inorganic mercury, monomethylmercury and ethylmercury were detected by atomic fluorescence spectrometry in an Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg⁰, monomethylmercury hydride and ethylmercury hydride, respectively. The effect of mercury complexing agent such as cysteine, ethylendiaminotetracetic acid and HCl with respect to water and Ar/H₂ microflame was investigated.The behavior of inorganic mercury, monomethylmercury and ethylmercury and their cysteine-complexes was also studied by continuous flow-chemical vapor generation atomic fluorescence spectrometry in order to characterize the reduction reaction with tetrahydroborate. When complexed with cysteine, inorganic mercury, monomethylmercury and ethylmercury cannot be separately quantified varying tetrahydroborate concentration due to a lack of selectivity, and their speciation requires a pre-separation stage (e.g. a chromatographic separation). If not complexed with cysteine, monomethylmercury and ethylmercury cannot be separated, as well, but their sum can be quantified separately with respect to inorganic mercury choosing a suitable concentration of tetrahydroborate (e.g. 10^? 5 mol L^? 1), thus allowing the organic/inorganic mercury speciation.The detection limits of the flow injection-chemical vapor generation atomic fluorescence spectrometry method were about 45 nmol L^? 1 (as mercury) for all the species considered, a relative standard deviation ranging between 1.8 and 2.9% and a linear dynamic range between 0.1 and 5 μmol L^? 1 were obtained. Recoveries of monomethylmercury and ethylmercury with respect to inorganic mercury were never less than 91%. Flow injection-chemical vapor generation atomic fluorescence spectrometry method was validated by analyzing the TORT-1 certificate reference material, which contains only monomethylmercury, and obtaining 83 ± 5% of monomethylmercury recovered, respectively. This method was also applied to the determination of monomethylmercury in saliva samples.     

Ab initio characterization of the Mg-HF van der Waals complex

The equilibrium structure and the three-dimensional potential energy surface of the Mg-HF van der Waals complex in its ground electronic state have been determined from accurate ab initio calculations using the coupled-cluster method, CCSD(T), in conjunction with the basis sets of triple- through quintuple-zeta quality. The core-electron correlation, high-order valence-electron correlation, and scalar relativistic effects were investigated. The Mg-HF complex was confirmed to be linear at equilibrium, with a vibrationless dissociation energy (into Mg and HF) D(e) of 280 cm(-1). The vibration-rotation energy levels of two isotopologues, (24)Mg-HF and (24)Mg-DF, were predicted using the variational method. The predicted spectroscopic constants can be useful in a further analysis of high-resolution vibration-rotation spectra of the Mg-HF complex.     

Bis(tetraethylammonium) tetrabromocobaltate(II) and bis(tetrabutylammonium) tetrabromomanganate(II): structure and magnetic properties

The crystal structures of tetrabromocobaltate(II) and tetrabromomanganate(II) salts of general formula [(C₂H₅)₄N]₂[CoBr₄] (1) and [(C₄H₉)₄N]₂[MnBr₄] (2) were determined. The manganese and cobalt cations are four-coordinated by bromide anions and they adopt a slightly distorted tetrahedral coordination. In the structure of both compounds there are neither hydrogen bonds nor any unusual short-range intermolecular interactions. Magnetic measurements of the powdered samples gave negative values of the Weiss constants equal to −4.9 and −1.1 K for (1) and (2), respectively, which suggest antiferromagnetic interactions to be transferred within the crystal lattice.     

A HTS Assay for the Detection of Organophosphorus Nerve Agent Scavengers

A new pro‐fluorescent probe aimed at a HTS assay of scavengers is able to selectively and efficiently cleave the P? S bond of organophosphorus nerve agents and by this provides non‐toxic phosphonic acid has been designed and synthesised. The previously described pro‐fluorescent probes were based on a conventional activated P? Oaryl bond cleavage, whereas our approach uses a self‐immolative linker strategy that allows the detection of phosphonothioase activity with respect to a non‐activated P? Salkyl bond. Further, we have also developed and optimised a high‐throughput screening assay for the selection of decontaminants (chemical or biochemical scavengers) that could efficiently hydrolyse highly toxic V ‐type nerve agents. A preliminary screening, realised on a small α‐nucleophile library, allowed us to identify some preliminary “hits”, among which pyridinealdoximes, α‐oxo oximes, hydroxamic acids and, less active but more original, amidoximes were the most promising. Their selective phosphonothioase activity has been further confirmed by using PhX as the substrate, and thus they offer new perspectives for the synthesis of more potent V nerve agent scavengers.     

Incommensurate magnetism in FeAs strips: neutron scattering from CaFe(4)As(3)

Magnetism in the orthorhombic metal CaFe(4)As(3) was examined through neutron diffraction for powder and single crystalline samples. Incommensurate [q(m) ≈ (0.37-0.39) × b*] and predominantly longitudinally (|| b) modulated order develops through a 2nd order phase transition at TN = 89.63(6) K with a 3D Heisenberg-like critical exponent β = 0.365(6). A 1st order transition at T2 = 25.6(9) K is associated with the development of a transverse component, locking q(m) to 0.375(2)b*, and increasing the moments from 2.1(1) to 2.2(3) μ B for Fe2+ and from 1.3(3) to 2.4(4) μB for Fe+. The ab initio Fermi surface is consistent with a nesting instability in cross-linked FeAs strips.     

Synthesis of β-amino-α-trifluoromethyl alcohols and their applications in organic synthesis

A comprehensive overview on methods applied for syntheses of β-amino-α-trifluoromethyl alcohols, including stereocontrolled variants, is presented. In addition, reported cases of the exploration of β-amino-α-trifluoromethyl alcohols for the preparation of trifluoromethylated peptidomimetics and other biologically active, fluorinated compounds are discussed. Attractive opportunities for their applications as organocatalysts are also presented.